Used Treatment for sale (803)

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Tjdpszpxwdofx Anlsb Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Tjdpfx Anezt R E Ujleb With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Tedozbiqgopfx Anljb

Year of construction: 2016, condition: excellent (used), Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage. Tjdpew Dykwefx Anlob

Condition: excellent (used), functionality: fully functional, DAF water treatment plant Consists of:- Holding tanks Mixing tanks Tedpjxwni Ejfx Anlsb Nijhuis Saur Industries DAF KHD Humboldt centrifuge All associated pumps and dosing units. Ex Walkers crisps previously treating 71 cubic meters per hour

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Veolia Waste Water Treatment Spare Parts Package (Unused 2021) 2 x Alfa Laval Aldec 45 centrifuge (decanter) Process Application description: IW - waste water Process description: MUE, Biological sludge dewatering Max. density of compact wet cake: 1.3kg/dm3 at max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm DNF unit - upper tank - PPM 200CE - A DNF unit - upper tank - PPM 200CE - B 4x filter for Mn removal 3x reverse osmosis (RO) skid 3x powder activated carbon (PAC) dosing unit - Rittal JB 2x DNF unit - poseipump unit 3x unit blower ES145/5P-RVP300-spec 6x front filter Mn removal 2x DNF unit - recirculation pipe Spare parts can be seen in the asset list upon request. Please note pictures are representative and not of actual items Tjdpfx Aozb N Hhonlsb Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement for (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Tjdpfx Ansxqzmkslob Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Todpfx Ajzi N Dhjnleb Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Tsdpfx Aezt Sb Donljb Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) Tsdpfx Aezdri Nenlob VEOLIA MIDI-RO 10-750-EP year of manufacture 2010 500 liters/hour energy-efficient reverse osmosis system

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. Tsdpozbib Sjfx Anlob - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Tsdpfjzvchajx Anlob

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Tsdpfxozmap Ne Anlob Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Tsdpfx Ajyr H Anjnleb Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Tsdpsy A Trlofx Anleb If you have any questions, please feel free to contact me.

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Tedezvghkepfx Anlob

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 19E023b, Complete skid Data sheet attached (Technical proposal X230) Nominal feed flow: 17,048 L/h Maximum operating pressure: 40 bar Maximum operating temperature: 50°C Tedpjx R Swcsfx Anlob Total filtration surface: 960 m2 Total power: 66 kW Stainless steel connections Length: 5600 mm Depth: 4500 mm Height: 3500 mm Accessories (feed pump, instrumentation, electrical cabinet with supervision, multistage high-pressure pump) CIP loop included (excluding chemical IBC)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) Tsdsyzh Ulspfx Anlsb - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) Todpfxjyz Dhze Anlob - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control Tedpfx Ajxyhdbenleb

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother Todezvf Naopfx Anlob - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 18 / 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Tjdjwmm U Uepfx Anleb

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Todpfjyxnwhjx Anlsb

Year of construction: 2021, condition: like new (used), functionality: fully functional, Alpha Laval Aldec 45 Centrifuge (Decanter) (Unused 2021) High-performance industrial decanter centrifuge system designed for continuous sludge dewatering in petrochemical wastewater treatment. Engineered for both oily and biological sludge streams, delivering robust phase separation with >15% solids cake Max. density of compact wet cake: 1.3kg/dm3 - max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm Todpfxozl U A Us Anlob Please note as the goods are packed the pictures shown are representative and not of actual units. Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. BPDD and EUS forms can be downloaded from our website (AllSurplus).

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase * Frequency: 50 Hz * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities. Todpfxszl Slae Anlsb