Used Disintegrator for sale (11)

Condition: used, Little used Silverson model GX10/1500 stainless steel multipurpose batch high shear mixer. Unit has general purpose disintegrated head. Unit direct driven with 7.5kW, 1470rpm motor. Includes Silverson model D/Lift hydraulic operated raise & lower mobile stand rated 300kgs safe working load. Hjdpfx Ajy Inr Roazeu

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Fine Grinding & Micronization System Complete Industrial Production Line – Excellent Condition Complete industrial grinding and micronization system based on the DESI-14 high-speed disintegrator, designed for intensive particle-size reduction and production of fine powders. Manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia, this particular grinding and activating unit was manufactured for the grinding and activation of natural zeolite. The system combines the DESI-14 disintegrator with controlled material feeding, two-stage cyclone separation, automatic air filtration, product conveying and big-bag discharge, providing a complete industrial grinding line. Final particle-size distribution and processing capacity depend on the characteristics of the processed material, feed rate, required fineness and operating parameters. According to the manufacturer's operating instructions, throughput can be adjusted and increased where the required product fineness and motor load permit. Proven Factory Performance During the manufacturer's factory test using calcium carbonate (CaCO₃), the system achieved: Throughput: 1,000 kg/h Hodjzy Nbhopfx Aazeu Final product: 92% of particles below 30 μm Feed particle size: below 100 μm Feed moisture: 2% This provides documented factory performance under the stated test conditions. Actual throughput and final particle-size distribution depend on the processed material, required fineness and operating parameters. Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year of manufacture: 2019 Technology: High-speed impact disintegrator Rotor configuration: 6-row rotor set Rotor sets included: 2 complete sets, each consisting of 2 rotors Rotor speed: approx. 2,965 rpm Main drives: 2 × 30 kW electric motors Maximum total installed power: 80 kW Power supply: 3N, 50 Hz, 380 V Wear protection: Working surfaces of the rotor impact elements protected with HARD 60 wear-resistant alloy Cooling: Water-cooled housing and cover Maximum airflow through grinding unit: 1,000 m³/h Maximum feed moisture: 2% Maximum feed temperature: 50°C Electrical protection: IP54 / IP55 DESI-14 Disintegrator Dimensions: 1,570 × 1,160 × 1,300 mm Net weight: 850 kg Complete Grinding Line Installation dimensions: approx. 6,000 × 5,200 × 4,000 mm Gross weight: approx. 2,700 kg Feed hopper volume: 1.5 m³ Complete System Includes DESI-14 disintegrator on frame, 2 complete rotor sets,1.5 m³ feed hopper, WAM screw feeder, First-stage cyclone, Second-stage cyclone with hopper, 3 rotary valves, WAM screw conveyors, WAMFLO automatic air filtration system Exhaust fan, Diverter flap valve for big-bag filling, Control board, Supporting steel structures, Connecting channels and components The grinding system is designed as an integrated production line: material is fed into the DESI-14, ground material is transported through the air stream into the cyclone separation system, and the remaining fine material is captured by the automatic air filter. The finished product is then conveyed towards the big-bag discharge system. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Hodpsymayvofx Aazou

Condition: used, Used Silverson model GX10/1500 V range stainless steel high shear mixer. Unit direct driven by approximately 7.5kw electric motor. Stainless steel mixing shaft measures approximately 1100mm long with 100mm diameter upwards facing general purpose disintegrating head. Hodozvylcjpfx Aazju

Year of construction: 2004, condition: good (used), Disintegrator calibrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, particle unification for bulk solids, and granulation of moist products. Throughput from 50 to 5,000 kg/h. Hodjy Hfxfjpfx Aazou

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF Hsdpfex U Dvlex Aazou

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal Shredder in open design. Manufacturer: Recuperma Model: RECU UZ 20000 Particularly suitable for gentle and rapid composite material breakdown. Disintegration, separation of composite materials, and volume reduction. Operating principle: - Use of flexible impact elements - Size reduction through impact effect of the input material - Crushing to various particle sizes Throughput: Hourly capacity depends on the particle size and bulk density of the material to be processed. Technical data (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: belt drive Auxiliary drive: hydraulic unit approx. 1.5 kW Control: SIEMENS Frequency converter: SEW brand Drum diameter: 1900 mm Weight: 25 tons Wear plate lining HB450 Material loading via hopper Chain curtain as protection against ejection of parts Material discharge via sliding door Hedpfjv U Ttbjx Aazeu Currently, the machine is defective. The price refers to the repaired machine. Unrepaired price: €370,000. Transport not included.

Year of construction: 2026, condition: like new (used), Disintegration, crushing, and mixing with grain size of 0-60/80 mm. For soil conditioning and mixing in lime, mixed binders, sand, compost, or other soils. Crushing and disintegration of soil clods, separation of stones, branches, roots, etc., with particle size 0-60/80 mm. Aerating, crushing, shredding, and turning of biomass, organic waste, and compost. For applying lime, we also offer a binder dosing unit in the program, available with a weighing system. Hjdpfxjyf Auts Aazou The separator comes from a short-term rental and shows minimal signs of use. Fitted with a Likufix SW48 adapter – can also be modified to suit your requirements. Price without adapter. Suitable for excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain line connection required: 1 Series: TSC.154.342

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Hodpfx Ash Utyrsazeu Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Hedpfx Aed Nwk Uoazou Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: new, Year of construction: 2025, Briquetting is a great cost-saving measure for companies. Further improvement of the efficiency and quality of packing pays off. BMD-800B is fit for a wide range of shrink wrapping with single or multi-row products. Automated alignment and placement feature improves the production efficiency and allows for the product to operate 24/7. When paired with UMPT briquette presses & our transportation table, this machine can support up to 4 BPA600A presses and produce up to 5 bags of briquettes per minute. After packaged in high-quality polyethene film the products have a compact and neat appearance which ensures the items’ integrity, the convenience of transportation and resistance to humidity. In contrast, currently widely used pre-made briquette bags have the disadvantage of unnecessary movement of briquettes inside the package which in turn disintegrate during logistics and lose value in the eyes of the end-consumer. Using shrink wrapping tightens the pack making it easier and safer to handle, increases resistance to humidity and even allows briquettes to be stored out in the elements. Stick-on carry handles are optional to provide the ultimate briquette pack. Features: Automated quality control and recycling of rejected briquettes Automated de-dusting Automated alignment and packing Automated leaflet insertion Automated sealing and heat shrinking of packages Hedpfofh R Uzsx Aazsu Automated palletizing and pallet wrapping The system ensures proper briquette dedusting, weighting (optional), alignment, packing and shrinking of the package. Automated sealers ensure a proper seal on each package eliminating the human factor while automated palletizing attachments load and wrap the pallets. Technical data Sealing type Sleeve Packing capacity ᐸ5 packs/min Shrinking Tunnel speed Variable, ≤15 m/min Working height 780-850mm Shrinking Tunnel size Depends on the size of the product Sealing knife width 880mm Air pressure ≤0.5MPa (5 bar) Power supply 380V/50-60Hz/Trifazis Rated power consumption ≤30 kW Film type Polyethene (PE) Max film size 850mm (width) x 280mm (outer diameter)