Used Dmg Ecomill 50 for sale (410)

Year of construction: 2010, condition: ready for operation (used), Lathe Ihjdoi Ewq Sepfx Addst CTV 250 - R Manufacturer DMG Gildemeister Serial number 6860000451 Switch-on hours: 46.491 spindle hours 30.748 floor space 4m x 3m optional cooling unit for connection of two CTV 250

Condition: excellent (used), Year of construction: 2020, operating hours: 537 h, functionality: fully functional, turning length: 1,450 mm, turning diameter: 425 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 1,240 mm, controller model: DMG MORI SLIMline® Multi-Touch Steuerung, Equipment: documentation/manual, 2-axis universal lathe with C-axis and Y-axis and driven tools TECHNICAL DETAILS Control: Siemens SLIMline multi-touch Swing diameter over bed: 700 mm Swing diameter over slide: 370 mm Max. turning diameter: 425 mm Recommended turning diameter: 320 mm X-axis: 307.5 mm Y-axis: ±60 mm Z1-axis: 1240 mm Spindle distance between main and counter spindle: 1450 mm Ihodpev D Hnqsfx Addjt Main spindle Spindle type: SMW BB-D 255/A2-8" Spindle nose: A2-8" Max. speed: 3,250 rpm Clamping diameter: 255 mm Drive power (40/100%): 33 / 22 kW Torque (40/100%): 630 / 420 Nm Turret Number of tools: 12 Number of driven tools: 12 Holder diameter: 40 mm Tool holder: VDI 40 Number of BT tool positions: 6 Index time 30°: 0.46 s Speed: 4,000 rpm Power: 5.44 kW Torque: 20 Nm Tailstock Type: hydraulic Travel path: 1,200 mm Force: 12 kN Position accuracy: 0.2 mm Centering point size: MK 5 Rapid traverse: 4 m/min Rapid traverse & accuracy Rapid traverse X/Z axis: 30 m/min Rapid traverse Y axis: 22.5 m/min Accuracy X / Y / Z: 10 µm Accuracy C: 10 arc seconds MACHINE DETAILS Connection power: 60 kVA Operating hours: 2,822 h Spindle hours: 537 h Hydraulics Tank: 17 l Pressure: 55 bar Cooling Chip conveyor: 245 l Pump power: 0.85 kW Pump flow: 20 l/min EQUIPMENT - Through hole: D 82 mm - Chip conveyor - Hydraulic hollow clamping cylinder system for up to Ø80 mm bars - Hydraulic tailstock with pedal control - Electronic handwheel - Set with hard and soft clamping jaws - Collets  - Manual tool measuring probe - DMG Mori Io Tconnector - Documentation Machine has slight transport damage on the side panel on the left (see pictures)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES Ihsdpfxsxamqmj Addst - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 7194NV502130518J, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: Mitsubishi, controller model: MAPPS IV, spindle speed (max.): 13,000 rpm, operating hours of spindle: 100 h, coolant supply: 15 bar, spindle motor power: 15,000 W, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, rotational speed infinitely variable, For sale is a DMG MoriSeiki NV5060. Machine can be inspected under power at any time. Ihjdpevccmyefx Addjt

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Ijdpfx Adewvr Tnedeht Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Ihsdpjv N Hc Sefx Addot

Condition: excellent (used), Year of construction: 2001, Hello. I have a renowned brand of CNC milling machine CINCINNATI Arrow _ 1250 for sale. _ Type: CNC milling machine Manufacturer: CINCINNATI Model: Arrow _ 1250 Control: HEIDENHAIN TNC430 Year of manufacture 2000 _ Machine parameters: - tool magazine: 21 pcs. on SK40 / BT40 - max. rpm 8000/min. - max. travel in the X axis: 1262 mm Ihsdpfeu Au Akox Addet - max. travel in the Y axis: 562 mm - max. travel in the Z axis: 562 mm - workpiece measuring probe - cooling system through the spindle - measuring rulers in all 3 axes - spindle drive power: 11 KW - chip conveyor - DTR - machine weight: 6 tons THE MACHINE IS IN PERFECT TECHNICAL AND VISUAL CONDITION!!! _ WHY IS IT WORTH BUYING MACHINES IN PPM? - we have our own service _ stationary and mobile - we have already sold over 700 machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 2022, operating hours: 13,312 h, functionality: fully functional, machine/vehicle number: 00360002291, turning length: 1,100 mm, spindle speed (min.): 5,000 rpm, - B-axis: ±120° Ihjdpfxswylh He Addot - Y-axis: ±100 mm - 30-fold chain magazine - Tailstock: hydraulically operated with foot control pedal

Year of construction: 2012, operating hours: 38,984 h, condition: refurbished (used), machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter Ihjdpfok Ny R Djx Addst The price contains the machine itself, the cost of unassembly and the loading on truck. Every other cost on your side.

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, functionality: fully functional, machine/vehicle number: 06860001401, spindle speed (max.): 5,000 rpm, turning diameter: 320 mm, TECHNICAL DETAILS Max. swing diameter: Ø 320 mm Isdewcrgnspfx Addoht Spindle speed: max. 5,000 rpm MACHINE DETAILS On-time: 60,009 h Spindle hours: 38,984 h Machine weight: 6,000 kg Connected load: 40 kVA EQUIPMENT - Automatic workpiece feeder - Chip conveyor - High-pressure cooling system with paper filter Further technical details according to the manufacturer - without guarantee X-stroke: 650 mm Y-stroke: +90 mm / -65 mm Z-stroke: 300 mm Max. workpiece diameter: Ø 220 mm Max. workpiece height: max. 160 mm Max. chuck diameter: Ø 260 mm Tool turret: 12 x VDI 40 Speed: 4,000 rpm

Condition: excellent (used), Year of construction: 2003, DMG DMU50 Evolution, 5-axis simultan Year: 2003 x-travel 500 mm y-travel 420 mm z-travel 380 mm control iTNC 530 Heidenhain spindle speeds 20 - 12000 U/min tool taper SK 40 DIN 69871 A Feed speed 20.000 mm/min rapid traverse X-axis 50 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min tools in tool magazin 24 (2x12) max. tool length 200 mm max. tool weight 6 kg max. tool diameter 50 mm table surface area 500 x 380 mm center bore 30 H6 T-slot - distance 63 - 14H7 mm swivelling range 0° / +180° (B-Achse) swivelling range 360° / 0,001° (C-Achse) max. table load 200 kg Rapids C - Axes 33 min -1 rapid traverse B-axis 26 min -1 total power requirement 38 kVA weight of the machine ca. 6,0 t Accessories/options: Through spindle coolant Swarf conveyor Documentations Ihodpfswmm Eysx Addst Visiport window system Vice Tool holders Under power in our warehouse, ready for inspection.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1. 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti 2. more than 20 steady tool holders for turning and boring tools by ALGRA Iedpfsvy Iqxsx Addoht 3. 4 bolted tool holders by SAUTER/ALGRA 4. a mechanically operated bar puller toolholder by KINTEK 5. a live center 6. balanced pressure clamping (able to grip thin walled parts) 7. sets plastic drawtubes for bar working in different diametrers 8. more than 50 sets of soft machined jaws 9. 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW 10. SMW special ring for soft jaw turning/machining

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Ijdpox D S S Defx Addeht Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center DMG DMF 250 Linear Year Mfg 2006 Heidenhain iTNC530 control Iodpfx Adsx Nmlljdoht Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Ihedpfxsx D H Hij Addst Application Types Milling

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 Ijdpfx Adjyaqgysdjht - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), Year of construction: 2019, Delivery at the beginning of June 2026!!! Control: CELOS with Heidenhain TNC 640 Milling head: Universal milling head with controlled A-axis HSK63A Spindle options: Spindle tool holder HSK-A 63 Tool magazine: Tool magazine, wheel type, 63 positions HSK63A Coolant / Chip removal: Through-spindle coolant system, 80 bar, frequency controlled; oil/emulsion mist extraction unit; cooling device with air blast Measuring / Monitoring: Heidenhain infrared probe SK 40, 3D quickSET; MPC Machine Protection Control Further options: Operating mode 4 Options for HEIDENHAIN control: Electronic handwheel Ihodjx Uqykepfx Addst Documentation: 1 set documentation in German; electrical schematic in German Display language: German

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min Iodpfx Adsxbtqiedoht travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel Ijdpfsphlviox Addoht 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   Ijdpfx Aex Sqptoddeht 15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof • LED work area lighting Machine Benefits Technical Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Drive type: ball screw drives with ac servomotors • Voltage: 3 × 400 v Extra Information The machine is in fully functional condition Tested and confirmed by DMG service report, including accuracy measurements Ihjdpfxex D Nige Addet Complete documentation is available Currently disconnected from power Dimensions Machine Depth 3065 mm

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Iodpfex R Szhsx Addoht Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 450 mm, table length: 400 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 18,900 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 40 eVo was manufactured in 2015, featuring a robust HEIDENHAIN iTNC 530 control system, a new spindle, and a high-pressure cooling system. It offers X, Y, Z movements of 400 mm, 400 mm, and 375 mm respectively, with a spindle speed of 14000 1/MIN and a 30-position tool magazine. Consider the opportunity to buy this DMG MORI DMU 40 eVo vertical machining centre. Contact us for more information about this machine. • High-pressure cooling Ihjdpfsx D D Tyex Addet • 01/2025: a new spindle, linear guides, hydraulic and pneumatic distribution were installed. The rotary table hydraulics were also newly sealed. • Machine in very good condition! Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function Isdox D Nd Dspfx Addsht • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,913 h, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 28,000 rpm, spindle motor power: 29,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This DMG Mori HSC 55 linear Universal Machining Centre was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm and a capacity for 30 tools. It is equipped with a Heidenhain iTNC 530 control unit and has 5 axis. Machine Benefits Qualitative Machine Benefits • The machine has capacity for 30 tools Technical Machine Benefits • Measuring length: 400 x 400 mm • Axial run-out of the clamping surface Ø 350 mm • Axial stability of the work spindle: 0,005 mm • Spindle nose : 250 mm • Tool holder hsk-a63 according to din69893 • Pickup tool changer 16 places (chain) Iedpfx Adjx D Eqgodsht • Active cooling unit for main spindle and linear drives// active cooling unit for control cabinet • Direct absolute measuring system incl. Sealing air • Coolant/blast air changeover • Z-axis extension to z = 460mm Extra Information Machine still under power.