Used Dmg Sprint 20 5 for sale (392)

Condition: good (used), Year of construction: 2016, Travel ranges X / Y / Z: 750 / 600 / 520 mm Djdpfx Agjzy Uvdsgjwb B-axis (swiveling): -10° / +95° C-axis (rotating): 360° Clamping surface of table: 800 × 620 mm Table load, max.: 350 kg Spindle speed: 12,000 min⁻¹ Spindle power / torque: 13 kW · 83 Nm (40 % duty cycle) Tool holder: SK 40 / BT 40 Tool magazine: 32 positions, chain type Rapid traverse rate X / Y / Z: 24 m/min Connection value: 32 kVA · 50 A Machine weight: 7,800 kg - Rotary/swivel table with B/C axes, both axes hydraulically clamped — 5-axis machining in a single setup (3+2 axes indexed, no simultaneous machining) - Heidenhain TNC 620 — the best available operator interface on the market - Chain magazine with 32 × SK 40, tool diameter up to 130 mm (300 mm with free spaces), tool weight up to 6 kg - Internal and external coolant supply - Tool measurement system in the machine - Workpiece probe from DMG MORI - Chip conveyor, coolant system with solid particle filtration - 3D quickSET kinematic measuring system in a case — this allows the swivel axes to be checked and recalibrated without a service technician - Complete original documentation: operating manual, technical manual, transport and installation instructions, spare parts catalog, electrical overall documentation The main spindle was renewed in May 2026, and the X-axis in 2025. Thus, the two most expensive wear parts of the machine are as good as new — regardless of the operating hour counter reading. Machine operating time: approx. 16,600 hours Machining time: approx. 6,900 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,110 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, rotational speed (max.): 28,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 28,000 rpm, operating hours of spindle: 10,000 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous machining center Linear motors 28,000 rpm spindle with HSK 63A, recently replaced Rotary table, 950mm diameter Wireless workpiece probe MH Laser presetter for tool inspection Optical scales Remote handwheel Dwodpfxjzmxmte Aggeb Chip conveyor NO coolant supply through the spindle Complete with manuals Disconnection scheduled for August 25th Removal scheduled for August 26th

Condition: used, Year of construction: 2015, 3 axis cnc lathe DMG MORI CTX BETA 2000 Year of production 2015 Siemens 840D control C axis driven tools Tool head 16 positions Sauter VDI40 Max. workpiece diameter 600mm Max. workpiece length Dwodpfxeulw Igs Aggsb 2,000 mm Spindle clearance: Ø104mm Hydraulic support Measuring probe

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Dodpfxsxvzy Uo Aggowb Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW Dwedowl N Tqspfx Aggsb control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: used, Year of construction: 2001, Expected!!! Dsdpezvhmuefx Aggswb

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: 620, total height: 2,670 mm, total width: 3,110 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,650 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, product length (max.): 3,370 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 1035V was manufactured in 2015. It features impressive travels of 1035 mm in X, 560 mm in Y, and 510 mm in Z. The machine has a maximum spindle speed of 12,000 rpm and a robust table size of 1200 x 560 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 1035V vertical machining centre we have for sale. Contact us for further details. • Operating hours: 42,440 h (power on) / 17,741 h (spindle cutting) • Table size (L x W): 1200 x 560 mm • Machine working footprint (approx.): 6.3 x 4.55 x 2.808 m • Machine weight (base machine): 4650 kg • Transport dimensions (L x W x H): machine 3.37 x 3.11 x 2.67 m • Notes: New spindle Additional equipment • Chip conveyor • Weight: 505 kg • Transport dimensions: 3.90 x 0.99 x 1.73 m • Internal cooling unit • Weight: 300 kg • Transport dimensions: 1.835 x 1.10 x 1.326 m • Renishaw probe • OTS tool measurement • Vises (approx. 150 kg total) Dwedpszmgciefx Aggob Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm Dedezkrqyepfx Aggjwb • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm Dwjdpfx Agsy Ty A Ssgsb CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,317 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, total width: 1,630 mm, total height: 1,920 mm, overall weight: 4,350 kg, controller manufacturer: FANUC, controller model: Series 160i-8, product length (max.): 4,900 mm, number of axes: 8, This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details. • Turning length: 120 mm • Turning diameter: 32 mm • Axis travels: • X1: 65 mm • Y1: 350 mm • Z1: 120 mm • X2: 265 mm • Y2: 235 mm • Z2: 320 mm • C1: 360° • C2: 360° • Spindle bore: 42 mm • Total power requirement: 34 kVA • Condition: Very good; connected and ready for testing Additional equipment • Set of accessories and tool holders included Technical Specification Dwsdpfx Asy E Nq Aoggob Counter Spindle No

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter Dwjdpfjzyplgjx Aggeb * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Djdpfx Agszd Dw Esgewb Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock >10 pallets available Dsdpfx Agjzkbt Degowb

Condition: ready for operation (used), Year of construction: 2010, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens 810D / ShopMill, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 10,000 rpm Table width: 560 mm Table length: 1,200 mm Number of tool magazine positions: 20 MACHINE DETAILS Control system model: Siemens 810D / ShopMill Control cabinet cooling: Rittal SK 33023.100 Spindle operating hours: 11,000 h Total operating hours: 33,600 h EQUIPMENT Dsdpszqfv Ajfx Aggewb Internal coolant supply (ICS) Chip conveyor

Condition: used, DMG DMC 75 V linear is a 5-axis machining center engineered for precision, high accuracy and reliable operation. Working capacities: travels X 885 mm, Y 600 mm, Z 600 mm; table load max 600 kg; B axis +10/-110°; C axis 360°; table speed 100 t/min; tool magazine 60 places, tool Ø max 40 mm, length 300 mm; spindle interface HSK-A63. Key specs: spindle 0–28,000 rpm (stepless), spindle power 55/43.5 kW; rapid traverse 90 m/min; air 6 bar; power 3x400 V 50 Hz; machine weight ≈11,000 kg; dims L3255×W2450×H3150 mm. Accessories: high-pressure coolant 60 bar, chip conveyor, electronic handwheel. Achieves tight tolerances; typical in automotive, aerospace, medical, watchmaking and machine tool industries Dwedpjy S Dfnefx Aggjb

Condition: good (used), Year of construction: 2004, operating hours: 4,900 h, functionality: fully functional, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,500 rpm, Gildemeister GMX 200 Linear (2004) Dwedpfx Ajx Iflheggeb KUKA KR 150-2 Robot (2004) Automated Mill-Turn Production Cell For sale: High-performance automated machining cell comprising a Gildemeister GMX 200 Linear mill-turn center and a KUKA KR 150-2 industrial robot. The system is engineered for efficient, flexible, and unmanned production operations. CNC Lathe / Mill-Turn Center Gildemeister GMX 200 Linear – Technical Specifications General Manufacturer: Gildemeister Model: GMX 200 Linear Year of manufacture: 2004 Machine type: CNC mill-turn center Control system: Siemens Sinumerik 840D Drive technology: Linear motors on X, Y, and Z axes Turning Maximum turning diameter: 560 mm Turning diameter over cross slide: 400 mm Maximum turning length: 1,070 mm Bar capacity: 65 mm Axes and Travels X-axis travel: 485 mm Y-axis travel: 160 mm Z-axis travel: 1,070 mm B-axis swivel range: ±110° Main Spindle Spindle speed: 5,000 rpm Spindle power: 37 kW Tool interface: HSK-A63 Milling Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Tool System Number of tool positions: 48 Automatic tool changer Equipment Y-axis B-axis milling unit Linear motor technology Chip conveyor Central coolant system Full CNC integration for robotic automation Industrial Robot KUKA KR 150-2 – Technical Specifications General Manufacturer: KUKA Model: KR 150-2 Robot type: 6-axis industrial robot Year of manufacture: 2004 Application: Part handling / automation Load and Reach Maximum payload: 150 kg Maximum reach: 2,700 mm Axes Number of axes: 6 Axis Motion range A1 ±185° A2 −155° / +35° A3 −120° / +158° A4 ±350° A5 ±125° A6 ±350° Axis Speeds A1: 120 °/s A2: 110 °/s A3: 110 °/s A4: 190 °/s A5: 180 °/s A6: 260 °/s Accuracy Repeatability: ±0.2 mm Controller and Electrical Controller: KUKA KRC2 Power supply: 3 × 400 V / 50 Hz Installation Mounting: Floor-mounted Installation position: Freely programmable Itsbmtox Iflhj Dty Aoc Weight Robot weight: 1,245 kg Production Cell Advantages - Turning and milling in a single setup - Automated part loading and unloading - Suitable for serial production and unmanned operation - High precision and productivity - Ideal for CNC job shops and industrial manufacturing 📍 Location: Finland 🚚 Delivery: Transportation can be arranged 📄 Condition: Used ℹ️ Note: Technical specifications to be verified with the seller prior to purchase.

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163 Control System Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 2,700 mm Y: 2,700 mm Z: 1,600 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 2,200 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Tool holder: SK50 according to DIN 69871 Tool Changer 63-slot wheel magazine Double gripper Equipment IKZ 40 bar Chip conveyor Electronic handwheel Rotating viewing window Minimum quantity lubrication (MQL) Coolant through spindle Coolant tank 980 l Mold making package Active chatter suppression (ACC) Adaptive feed control (AFC) Oil/emulsion mist separator Smartkey package Additional safety viewing windows (Visiport) Operating mode 4 (process observation) Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Weight approx.: 85,000 kg Year of construction: 2,015 Condition: in working order Djdpfxezqxkme Aggowb Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", * Dedpfxjy E Np Se Aggowb

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Dodpfx Ageyfv Tvjgswb Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Dsdjy Spuujpfx Aggewb Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: excellent (used), Year of construction: 2006, operating hours: 8,800 h, machine/vehicle number: 15405022544, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 790 mm, workpiece width (max.): 560 mm, workpiece height (max.): 460 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 4,500 kg, operating hours of spindle: 8,800 h, input voltage: 400 V, Equipment: documentation/manual, DECKEL MAHO DMC 635 V – CNC Machining Center – Heidenhain iTNC 530 – Year of Construction 2006 Description: For sale is a vertical 3-axis CNC machining center, DECKEL MAHO DMC 635 V, from our own machine inventory. The machine is being sold due to a restructuring of our machine park. It is in good visual condition. Inspection and a powered test run are possible by prior appointment. Technical Data: Manufacturer: DECKEL MAHO Model: DMC 635 V Machine Type: Vertical CNC Machining Center Year of Construction: 2006 Machine No.: 15405022544 Control: Heidenhain iTNC 530 Number of Axes: 3 Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Table Size: approx. 790 × 560 mm Maximum Table Load: approx. 600 kg Tool Interface: SK 40 Rapid Traverse: up to approx. 30 m/min Machine Running Time: approx. 25,231 hours Spindle Hours: approx. 8,800 hours Connection Power: 35 kVA Operating Voltage: 400 V Frequency: 50/60 Hz Location and Handling: Location: 22926 Ahrensburg, Germany Machine available for immediate delivery Inspection possible by appointment Dismantling, loading, and transport by the buyer or by agreement Sale ex works, unloaded The offer includes only the machine and the explicitly agreed accessories. Tools and tool holders shown in the pictures are not part of the offer unless expressly agreed otherwise. Price: Negotiable, plus VAT. All technical data is provided to the best of our knowledge, but without guarantee. Subject to prior sale and errors. Dedpfszr Iu Dex Aggjwb

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Dsdpfx Ajytbqvjggewb Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement Dwjdpfxjx D Iv Es Aggob X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Dwjdpfx Ageydd Acogeb

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,670 mm, total width: 3,288 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,275 mm, number of axes: 3, This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details. Dsdpfx Ajykaawsggowb • Distance table surface / spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 • Tool magazine positions: 20 • With adjacent tool positions free: 130 mm • With adjacent tool positions occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s • Equipment / features • Electronic handwheel • Air flow through the spindle activated via M function • Working time • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40