Used Dmg Sprint 20 5 for sale (392)

Condition: excellent (used), Deckel Maho DMC 635V in top condition – few spindle hours (Heidenhain iTNC 530) For sale is a highly precise and excellently maintained Deckel Maho DMC 635V. The machine has very few spindle hours and is in excellent technical and visual condition. Technical data Control: Heidenhain iTNC 530 Travel (X/Y/Z): 635 / 510 / 460 mm Table clamping area: 790 x 560 mm Spindle speed: 20 – 8,000 rpm Feed rate: 0.01 – 10,000 mm/min Rapid traverse: 30 m/min Tool holder: SK40 (DIN 69871) Tool magazine: 20 positions Machine weight: approx. 3,600 kg Equipment & accessories Electronic handwheel Coolant/air blast switchover (M25) Dkedpfoz E A Hrox Apmjw Coolant nozzle Machine condition The machine has been technically refurbished by us and is ready for immediate use: The geometry has been completely measured and is verifiably within the manufacturer's tolerance for new machines (geometry protocol included). All hoses have been preventively replaced. The machine has been thoroughly cleaned. An inspection and a detailed test under power are of course possible at our location. Everything from a single source: Baumgärtner CNC GmbH & Co. KG We are a specialist company that focuses on the service, maintenance, overhaul and automation of DMG machines as well as other well-known manufacturers. That is why we will not leave you alone even after the purchase. We will support you! We would also like to offer you the following: Transport and professional installation Installation and commissioning at your location Subsequent maintenance and repair work From machine purchase to ongoing production – you can rely on us. Please contact us for further information or to arrange an inspection appointment.

Condition: ready for operation (used), DMG Suppl. 110498 Flat control panel, TFT 15". 2386389, SN: 504822207, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Djdpfxsi I Iz Ae Apmokw

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 500 x 450 x 400mm, table size 630 x 500mm, table load 200 kgs, B axis -5/+110 degrees, C axis 360 (0.001 degrees), Dksdpfozicmpex Apmow spindle speed 12,000rpm, spindle taper Iso 40, 30 station ATC, Siemens 840D control, swarf conveyor.

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 Available after: KW 50 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Dedpfx Aez Rl Dxopmjkw Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Year of construction: 2023, operating hours: 4,500 h, condition: excellent (used), turning diameter: 670 mm, bar passage: 102 mm, spindle nose: JIS A2-8, spindle speed (max.): 3,000 rpm, tool length: 400 mm, turning length: 1,519 mm, CNC turning and milling center Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Dedpfxo Agr Dgs Apmskw Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine Further technical specifications and accessories can be found in the attachment “Photos and Data”. Accessories, illustrated tools, and clamping devices are only included if specified in the additional information.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,613 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Axes: 3 (X, Z, C); no Y-axis; no counter spindle • Spindle operating hours: approx. 3613 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • C-axis: main spindle CMain spindle and chuck • Spindle nose: A2-8 • Bar capacity: 102 mm (upgraded main spindle) • Spindle power: 33 kW @ 40% DC / 22 kW continuous • Spindle torque: 630 Nm @ 40% DC / 420 Nm continuous • Chuck: SMW BH-D 320 / A2-8, D103 mm (as specified) • Function: differential clamping pressureTurret and driven tools • Turret: 12-position VDI40 with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW @ 40% DC; 20 Nm @ 40% DCTailstock • Travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options (machine) • Setup package • Tropical climate package • 12-bar coolant supply • Manual working-area washdown gun • Variable spindle speed software option • DMG MORI IoTconnector • Digital Manufacturing PackageConstruction • Inclined cast-iron bed Dodpfjz Ipilox Apmekw • Linear guideways, 45 mm width Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • Tooling: • Set of 12 tool holders • Set of 6 boring tool holders • ALGra driven-tool holder set Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Dsdpfjzy N Nlex Apmokw Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2020, operating hours: 23,850 h, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table width: 1,100 mm, table length: 4,200 mm, table load: 1,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,500 h, spindle nose: HSK-A 63, number of slots in tool magazine: 120, Equipment: chip conveyor, CNC Bed-Type Milling Machine - Universal Manufacturer: DMG MORI Type: DMF 360-11 Year of manufacture: 2020 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: dia. 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 pos. Tool holder: HSK-A 63 Feed rates: Djdpfx Apj Agr Injmjkw Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swiveling milling head (B-axis) - Integrated rotary table, left-hand arrangement, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter, 600 l - 2 rotating viewing windows - Air purge for linear measuring systems - Rotary union for spindle - Flush gun for... Chip flushing - 2x oil and emulsion mist extraction units - Air blast through spindle center - Infrared touch probe, Heidenhain TS 460 (if present) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating Mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann RW-NC 300 rotary table (rotary table not included) - Pendulum operation - Tool breakage detection TRS2 - Tracyl cylindrical surface interpolation Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,742 mm, total width: 2,265 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 6,000 g, product length (max.): 2,441 mm, number of axes: 3, This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details. Dkodpfj Agb Uvex Apmow - Control: HEIDENHAIN TNC 620 (MC 7420D / TE 7150 keyboard / SLIMline panel)- Number of Axes: 3 (X, Y, Z)- X-Axis Travel: 635 mm- Y-Axis Travel: 510 mm- Z-Axis Travel: 460 mm- Table Clamping Surface: 790 x 560 mm- Max. Table Load (Center): 600 kg- Table T-Slots: 4 / 14H12, distance 100 mm (1 reference slot 14H7)- Table Height from Floor: 720 mm- Spindle Speed Range: 20 - 12,000 rpm (1/min)- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 83 Nm / 57 Nm- Tool Taper / Interface: SK40 (DIN 69871 / ISO 7388/2 Type A or DIN 69872 Form A/B)- Tool Clamping Force: 8 kN- Tool Magazine Capacity: 30 stations- Max. Tool Diameter (Adjacent Empty / Full): 130 mm / 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 6 kg (Max. total magazine tool load: 90 kg)- Rapid Traverse (X / Y / Z): 30 m/min- Feed Rate (X / Y / Z): Continuously programmable up to 20,000 mm/min- Positioning Resolution / Uncertainty: 1 µm / 16 µm (VDI/DGQ 3441)- Coolant Tank Capacity: ~120 l- Machine Weight: ~3,900 kg (3,950 kg with 30-tool magazine)- Apparent Power: 17 kVA- Nominal Line Current (In max): 28 A- Main Fuse: 35 A (Short-circuit breaking capacity: 0.35 kA)- Power Supply: 400 V AC (3/N/PE), 50/60 Hz- Control Voltage: 24 V DC / 230 V AC- Pneumatic Supply Pressure: 5.5 - 8.0 bar (Air consumption: 30 m³/h without blow-off; +20 m³/h continuous)- Machine Dimensions (W x D x H): 1,880 mm (2,265 mm with coolant tank) x 2,441 mm x 2,742 mm (Transport height min: 2,330 mm)- Required Floor Space: 4,500 x 4,400 mm Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Djdpfx Apjz Ri U Iomjkw Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: used, Year of construction: 2018, controller manufacturer: Heidenhain, controller model: TNC 620, _____ Description: Year of manuf. : 2018 Control : Heidenhain TNC 620 Speed : 12000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK 40 In General: Year of manufacture:2018 Control system:Heidenhain TNC 620 Travel ranges X/Y/Z:500/450/400 mm Spindle speed:12,000 rpm Tool holder:SK 40 Spindle: Technology:Inline direct drive Speed:12,000 rpm Power:13 kW Torque:83 Nm Tool holder:SK 40 NC swivel table: B-axis:+110°/ -5° C-axis:360° Clamping surface:630 x 500 mm Max. table load:200 kg Tool magazine: Technology:Chain magazine Dodpfj Ah Ndcsx Apmokw Tool changer:Double gripper Number of stations:30 Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Position Sensors:Direct scales on all axes Chip Removal:Chip conveyor Coolant Supply:Internal cooling, 12 bar Workpiece Measurement:Renishaw PP40 infrared probe Tool Measurement:Renishaw TS27R tool probe Kinematics measurement:3D quickSET Setup mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, total width: 510 mm, total length: 1,300 mm, total height: 1,800 mm, For sale is a presetting device of the DMG brand and type UNO 20/40 The device is in good condition, fully functional and ready for immediate use Technical data: Year of manufacture: 2015 Travel Z: 400 mm Travel X: 50-200 mm Measuring range: 400 mm Diameter: 400 mm Max. tool weight: 200 kg Overall dimensions: 1300*510*1800 mm Total weight: 240 kg Dkjdpouy Sf Rjfx Apmsw Tool holder: SK50-SK 40 On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2013, operating hours: 51,438 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle motor power: 34 W, spindle speed (max.): 4,000 rpm, spindle bore: 102 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 40 m/min, type of input current: AC, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, total height: 2,670 mm, total length: 7,601 mm, total width: 4,215 mm, spindle nose: 220h5, overall weight: 24,000 kg, Equipment: documentation/manual, Control system: Siemens 840D sl with ShopTurn Year of manufacture: 2013 Spindle hours: 16,310 Location: Germany Equipment: -Main spindle ISM 102 -Counter spindle ISM 102 -Milling spindle HSK63A 12,000 rpm -Eccentric turning and milling -Milling of gears using the involute method -Easy Tool Monitor for Siemens control system -Chuck flushing system, external -Chuck flushing system, counter spindle Dkjdpfxez Tc Tpj Apmew -Differential pressure monitoring for H-spindle -Differential pressure monitoring for C-spindle -Coolant supply through the counter spindle -Partially hollow chuck, Ø 104 mm -Tailstock function for the counter spindle -Rest support for rest 30-245 mm -Rest slide, NC-controlled -BFA 8/20/80 bar, 980 l, cooler -Hinged belt chip conveyor -Automatic sliding hood, electric -Tool measuring device -Chain magazine for 120 tools HSK63A -Signal light, 4-way -Cleaning of the safety glass -Coolant spray gun -Control cabinet lighting -Oil mist separator Including the following overhaul/repair measures: -General overhaul of main spindle S1 HSK 63 12,000 rpm -Replacement of safety glass -Replacement of hoses (pneumatics, cooling system, CNC)

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Dsdpfx Ajznniajpmekw Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: DMG DMC 635 V Control: Sinumerik 840 D solution line mit shopmill Year: 2008 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Dodpfx Apozinciomekw Z-Axis: 460 mm Rapid motion: (X/Y/Z): 30 m/min. Spindle speeds: 20 - 10.000 rpm Spindle motor: 9 / 13 kW Tool: SK 40 Toolchanger Tool capacity: 20 Table size: 790 x 560 mm Machine weight: 4.000 kg Equipment No chip conveyor Electronical handwheel Linear measuring system in all 3 axes

Year of construction: 2008, condition: good (used), Production Package 1 for DMC 635 V - Chip Conveyor Year: 2008 Dedpfxe Aag A Ho Apmekw Equipment Chip conveyor Auxiliary Tank Internal cooling: 17 bar High pressure pumps

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment Dedpfx Apey T R I Eomskw • Scraper-type chip conveyor • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Dksdpfoz Ipawsx Apmow Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment. Dkodpfozli U Eox Apmjw

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Dkodpfozi Dzhex Apmew Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Dkedpjzcxwrofx Apmew Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: good (used), Year of construction: 2017, operating hours: 46,510 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, overall weight: 6,650 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 7,658 h, number of slots in tool magazine: 20, Equipment: chip conveyor, Control system: Heidenhain TNC 640 Table surface: 1,100 x 570 mm Max. table load: 1,000 kg Dsdpfo Afymvox Apmokw Rapid traverse rate X / Y / Z: 42 m/min Chip conveyor Measuring probe Internal cooling lubricant system (IKZ)

Condition: like new (used), Year of construction: 2013, Machine has been equipped with a new PCD software. Dkodpex Tpibjfx Apmsw

Condition: used, Year of construction: 2011, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, rotational speed (max.): 10,000 rpm, overall weight: 3,900 kg, spindle speed (max.): 10,000 rpm, We offer this used DMG ECOLINE DMC 635 V eco vertical machining center, manufactured in 2011. Dedpfxoz Iyzro Apmskw Serial number: 1537000413A Year of manufacture: 2011 Maximum spindle speed: 10,000 rpm X/Y/Z: 635 x 510 x 460 mm Table: 790 x 560 mm SK40, Sinumerik Spindle refurbished in October 2024 First owner Weight: 3900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,454 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, DMG DMU50 - 2007 Well-maintained 3+2 axis CNC machine. FIRST original owner of this machine. Machine is still fully operational, it has seen very little use over the past years. A live demonstration of the machine running is available upon request. Technical Specifications:  Control system: Heidenhain iTNC 530  Axis configuration: 3+2 axis (automatic table, no handwheels)  Travel (X / Y / Z): 500 mm / 450 mm / 400 mm  B-axis: -15° to +110°  C-axis: 360° Included Equipment & Accessories: This is a very complete package. The sale includes:  Tool holders: ±100 tool holders included (please note: milling tools and collets Dsdpfe Ahxi Djx Apmjkw are excluded)  Workpiece touch probe heidenhain.  Spindle speeder: Madaula spindle speeder (compatible with the tool changer)  Workholding: 2 Schunk clamping vices + 1 height block + several extras.