Used Dna Sequencer for sale (478)

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Ffodpfx Aajyi Hrws Ejw Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fedpfxevvkfdj Aa Eefw

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up operations to complex sequence applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and ease of use with every connection. Ffedpfx Aaowxv Hkj Esw The controller features various interfaces, including an Ethernet port, an RS232 port, 7 logic inputs, and 8 logic outputs (24 volts). The CVI II controller can operate an ER series handheld power tool or an EM series stationary screwdrive. It is important to note that the CVI II can also be used in combination with a sensor-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Storage Capacity Between 2,500 and 8,500 tightening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening Strategies – Torque and Angle Monitoring – Angle and Torque Monitoring – Torque and Angle Monitoring – Torque and Angle Rate – Prevailing Torque – Yield Strength – Stall Torque – Torque and Angle – Plastic Zone Detection – Additional Torque and Angle Sensors – Self-Tapping – Current Monitoring Connectable Tools: Angle Screwdrivers / Stick Screwdrivers / Pistol Screwdrivers / Stationary Screw Spindles Dimensions (L x W x H): 400 x 400 × 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector Fodpfx Asibichsa Esfw - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface Fjdpfxsibh Tko Aa Esfw • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Fsdpfx Aaohbu E He Ejfw Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: new, power: 375 kW (509.86 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Low noise - Speed limiter - Cabin - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system - Stability control - Auxiliary heating (parking heater) - Warming automatic function - Toolbox - Windscreen - Additional steering axle Internal reference for customer inquiries: 3-383 Vehicle with day registration to PAVIC VOLVO FH 500 LL 6x2 CONTAINER FLATBED WITH FASSI 545RA.2.28 XE-DYNAMIC CRANE Crane: FASSI F545RA.2.28 xe-dynamic At 20.8 m, this crane can still lift 1,650 kg (optionally extendable with 2 manual extensions to 24.9 m and 700 kg) Continuous slewing range Double knuckle joint system with PROLINK (overbending knuckle arm up to 15 degrees) FASSI stability control Radio remote control with linear levers and reach display XF-System (Extra Quick) XP-System (Extra Power) FL-System (Full Lift) Outriggers operable via radio control LED work lights Winch pre-installation (winch model Fassi V30 can be retrofitted at any time) and much more Vehicle Description: Volvo FH 500 New Model Low-profile container flatbed body 2 pairs of sliding container locks extendable to 3 m for 20-foot containers 4 extendable warning boards with lighting, length up to 3 m Platform dimensions: 6,500 mm x 2,480 mm Side and rear walls 600 mm high Front wall 1,900 mm high Lashing rings at approx. 250 mm intervals Forklift approach protection Globetrotter safety cab, FH 13-liter diesel engine, 510 hp / 375 kW, 2,550 Nm Emissions according to Euro 6E, with SCR, particulate filter, and exhaust gas recirculation I-Shift, automated 12-speed gearbox I-Shift drive modes: Standard, Performance, and Economy Volvo Engine Brake (VEB+) Fedpfxeylxwqe Aa Ejfw Wheelbase 5,600 mm Drive 6x2 Differential lock Air/air suspension Front axle tires 385/55R22.5, drive axle tires 315/70R22.5, tag axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED main headlights Rain sensor (sensor-controlled wipers) LED daytime running lights, "V-light" LED rear lights, brake lights with emergency brake flashing sequence Stationary air conditioning Auxiliary heating (parking heater) Comfort driver's seat, air-suspended, heated, integrated seat belt Leather steering wheel Media / infotainment system with navigation Cool box with freezer compartment 33 L under bunk Electric roof hatch, tinted glass Near-side camera on passenger side for blind spot monitoring Adaptive cruise control (ACC) with collision warning and emergency braking function Lane departure warning system and much more. Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team will be happy to assist you.

Condition: new, Year of construction: 2026, travel -z axis 1200 mm travel -x axis 360 mm Weight 3250 kg NESTO 4 Axis Pro Cnc Wood Lathe Machine TECHNICAL SPECIFICATIONS - Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm - Control Unit TPA Control Unit (ltalian) - Z Axis Movement 1200 mm - X Axis Movement 360 mm - Long Axis Speed (Z) 70 m/min - Short Axis Speed (X) 30 m/min - Vertical Axis Speed (Y)20 m/min - Lathe RPM 4500 rpm (Direct Drive) - lnstalled Power 20 KW - Lubrication Unit ILC Automatie Lubrication - Piece Clamping Pneumatic Piston (7 Bar) - Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless) - Cutting Blade Hardened Triangle Blade Made of Special Steel - Cutting Blade Hardened Rounded Blade Made Of Special Steel - Cutting Blade Debarker Blade - Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer) - Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus 4 Axis Cad & Cam Program) - Machine Dimension Length: 3870mm * Width:2450mm * Highest: 2150mm - Weight 3250 kg GENERAL SPECIFICATION High-resolution Panasonic Japanese servo motors are used in our machine. The axis that rotates the part has the "Direct Drive" function and can work with a 5 kW servo motor at 4500 rpm. Precision ball screws and nuts are used in all axes. Workpiece length setting can be adjusted with a single knob. This ensures time savings and long-term linearity of the tailstocks. The control unit has a remote control function. In addition, with functions such as job sequencing, detailed reports and display of the three- dimensional state of the workpiece, the TPA control offers the user great convenience. Structure Of Chassis With its reinforced, vibration-free and stable chassis design, it provides accuracy over long production cycles and remains reliable for your machining needs. lt has an impressive frame design that provides reliable precision in operation. Ax1s Movements All axes are driven by servo motors. They allow precise acceleration at high speed. High quality and high precision rails, carriages and racks are used to prevent the movement of the axes from being affected by the slightest vibrations. Central Automatie Lubrieation Unit Fodpfx Aoyk Ia Sea Ejfw Automatie Tool Measurement Unit lt is a unit that makes an automatic measurement to measure the length of the cutter located at the end of the spindle motor and milling in the Z axis with the correct dimensions, and can store this information through the control unit. lt offers a convenience that eliminates the need for the user to enter measurements during the change of cutter. Tpa Control Unit (ltalian) TPA control unit has Windows based industrial computer. lndustrial computers enable trouble-free operation in the most demanding conditions. Main features of TPA Controller: lt has Ethercat communication system. -Detailed reporting is available. -lt provides ease of use thanks to its specially designed interface. Thanks to its built-in wireless feature, it allows remote access by connecting to the internet. In this way, you can receive your after­sales support needs instantly from our after Sales Team. CAD/CAM SOFTWARE/ PEGASUS CAD & CAM Cad/Cam Software/ Pegasus Cad & Cam lt is a specially designed Cad Cam program to be used in our machine. Pegasus Cad Cam Drawing program is a versatile software that can be used by designers and engineers to create, modify and analyze 3D models. This softwa...

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. Ffjdpfx Aasylyhdo Eew 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: good (used), Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description; all information is subject to change without notice. Automated real-time amplification and detection analyzer. Ffodpfx Aaeu D D E Re Eow A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automated sample transfer—from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® analyzer. Features Works with the COBAS® AmpliPrep Instrument and Docking Station for complete automation of sample preparation, amplification, and detection. Works undocked with the COBAS® AmpliPrep Instrument. AMPLILINK software provides a simple and efficient user interface for the custom-built Windows®-based PC included with the system. Automated and fully docked systems with COBAS® AmpliPrep/COBAS® TaqMan® HIV-1, HCV, and HBV tests are available. Benefits Higher throughput. Continuous operation maximizes laboratory productivity. 4 independently controlled thermal cyclers. Amplification and detection of RNA and DNA within hours. Quantification standard and closed tube format require no user interaction after sample loading. Reduces the risk of sample contamination. Optimizes workflow. Item condition: used, untested. Supplied as shown. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Ffjdpfx Ajh Dpxhoa Eew Item condition: used untested Scope of delivery as shown Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. Ffjdsxqxt Iepfx Aa Esw The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. Ffodpfx Aov T Db Tea Eew The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. Fedoxqxw Tjpfx Aa Eefw The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Fedeyc R R Djpfx Aa Eefw Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Fodouca Amjpfx Aa Eefw

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Dishwasher Model: R-Line 1500 with base Quick-ready system Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 7.7 kW, 16A-CEE plug Dimensions: 600 x 700 x 1128 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Ffedpfjfffhxsx Aa Eew Inlet and outlet hoses

Condition: not inspected (used), Year of construction: 1995, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2000mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Ffsdpfxjq Iipxs Aa Ejw Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Ffodpfx Aewc A R Dsa Esw Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- Ffedpfx Asw Ebacea Esw (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), functionality: fully functional, Year of construction: 1997, Hydraulic press brake LVD PPEB-EQ 80/25 S630 with retrofit 2023 Year of construction 1997 Serial number 24589 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Width table 150mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s weight 6200 kg motor 7,5 kW NEW 2023 CNC COMMAND CONTROL S-630 4 axes Y1 - Y2 X - R Touch screen 10” 2D-Graphic simulation of bending Automatic sequence bending Automatic development Database for tooling and workpieces ...  2 front supports included  . Fjdpfx Aajyag Ums Eofw

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). Ffedpoxnlflofx Aa Ejw - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Fedpovzxg Tefx Aa Eofw Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3106-N Cybelec CybTouch 8 Specifications - Maximum cutting thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 14 - Backgauge travel distance: 600 mm - Motor power output: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. CybTouch 8w control (Mounted on a swivel arm on the left-hand side of the machine.) - Parameter setting based on material specifications - Automatic clearance setting - Automatic correction for backgauge positioning - Backgauge retract movement to avoid bending of material - Supports that cover ⅔ of the standard size material - Support for RTS - the handover of the cut material to the user Ffjdpfx Asvhclmsa Ejw - Support for the motorized backgauge - Docking position - Hold-down pressure on sheet management - Hydraulic pressure management - Saving long cut sequences and programming in live colors - Clear page layout with large buttons on the easy-to-read screen that displays all the data an operator needs. - Very intuitive and operator-friendly user-interface - Few-second programming a part sequence - Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist Fodjtizavjpfx Aa Esfw - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site