Used Do Edger for sale (125)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Edger, trimming saw, multi-blade saw MADREW DCKWW 300/15 Year of manufacture: 2014 Machine is fully operational and in very good technical condition. TECHNICAL DATA: Saw spindle motor power: 15 kW Gsdox A Sfnepfx Abdoil Stepless feed speed adjustment: 6.0 ÷ 35 m/min Saw spacing with spacers (Board Width): 20 ÷ 300 mm Max number of saw blades: 4 Applicable saw blade diameters: Ø 250 ÷ Ø 400 mm Maximum cutting height: 120 mm Minimum board length: 1000 mm The machine is equipped with interlock and safety systems, ensuring safe and reliable operation: - Phase sequence and phase loss indicator - Overload indicator for the machine due to blunt blades or excessive feed rate

Condition: used, functionality: fully functional, The Layher AR O-ledger 1.09 m forms the horizontal connection between the vertical standards of a Layher Allround scaffold. The ledger carries the deck sections and provides stability and strength to the structure. Thanks to the rosette connection, assembly is quick and secure: just one hammer blow and the ledger is firmly locked in place. The length of 1.09 meters makes this variant especially suitable for narrow façades, stair towers, and refurbishment scaffolds where longer ledgers do not fit. These pre-owned ledgers have been technically inspected and are fully operational. They may show minor signs of use or discoloration but are otherwise in good condition—a durable and cost-effective choice for both professionals and rental companies. Gijdpfx Abjw Ei R Aodsl Applications - Refurbishment and façade scaffolds - Indoor scaffolds or stair towers - Scaffolding structures with limited space - Combination with Layher Allround standards and deck sections

Condition: used, Üstünkarli cross-cut saw, used. Parallel board edger Hydraulic adjustment Gedpjxd U Afsfx Abdeil Adjustable bushing, slat bushing Roller table with control lever, cross conveyor and material chute Infeed rollers, control panel Type UDKY Lascmsw Rlmioxgtzrjg Cutting height ≈120 mm Cutting width ≈800 mm Blade diameter Ø 350-400 mm

Year of construction: 1999, condition: excellent (used), 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology Giodpfjxtwwkox Abdol 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: good (used), Bandsaw line for big logs 1. Log conveyor Godpfeikvliex Abdsil 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Giedpfxegwqk Se Abdel Conveyors system between the machines included.

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: Gijdswd Hbijpfx Abdol 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection - Inkl. turning station

Condition: used, functionality: fully functional, Professional Layher AR O-Ledgers (2.57 m) – Large stock, immediately available For sale: batch of original Layher AR O-Ledgers, 2.57 meters long, used but in excellent technical condition. Ideal for stability and load transfer in Layher Allround scaffolding. Features robust galvanized construction and quick installation via rosette connections. Proven quality: part of the system with certified load capacity – up to approx. 2.7 kN point load and 2.65 kN/m uniformly distributed load for LW version. Suitable for heavy-duty use: optimal rigidity and stability, even for longer spans. Product details: Type: Layher AR O-Ledger – used Length: 2.57 meters Material: Hot-dip galvanized steel, suitable for intensive use Mounting system: Seamlessly fits Layher Allround thanks to rosette heads Condition: Technically inspected and ready for immediate use Stock: 644 units available in Andelst (NL) Why choose these O-Ledgers? Originality & Reliability: Genuine Layher parts with guaranteed compatibility In stock, fast delivery: Suitable for both small and large projects Top quality at a competitive price: a solid alternative to new equipment Flexible purchase: per piece, as a lot, or mixed lengths upon request Safe & professional transport: pickup or delivery by arrangement – forklift service available at pickup Gijdpfjw Niuzjx Abdjl Interested? Send a message if you: want prices per length or in bulk require additional photos or technical details

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edger and resaw type DR8/225, year 2007 7-arm variable adjustment, 2 x 110 kW motors each Pre-cutting saws of the side fabric Cutting height 225 mm S-acceleration with infeed roller table with turning and alignment table Splinter separator with two lamellas Board cross conveyor Roller conveyor with pull-off device Electric control cabinet with control panel incl. all accessories (circular saws etc.) Gisdpfx Abefcltgodol

Condition: used, color: other, Year of construction: 2024, Drive: Track Please contact Christiaan Dekker for more information Swampmaster 2200 NEW -Amphibious ponton for excavator -Ring to mount a Caterpillar 320( we can change this for other excavators) -For excavator 18- 25 ton -Length of ponton 10 meter -3 chain system Gijdpfetz Stcex Abdol -Width of track: 1.80 meter -Dimensions: 10000 x 1800 x 1840 mm single 10000 x 5200 x 1840 mm connected

Condition: used, Cantilever racking, heavy duty racking consisting of: -Shelf: with 2 stands each -Support arms: double-sided -6x ledger depths: 900/500/400/300/230 mm -welded -Also: other quantities and heights available on request -Number: 1x shelves available Gjdjd Eqlpspfx Abdjil -Transport dimensions: 2100/2020/H2170 mm -Own weight: 430 kg/piece

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Gisdpfx Abjw U Nzrjdel

Condition: used, Bottero Variant 815BCS variable angle 0-45° Gijdpfx Aewinrtsbdjl CY 2004 Total overhaul 2022 Variant is the range of Bottero variable angle straight line edgers. The 8 models available within this range of machines allow working the flat edge of an angle varying up to 45° and removing the arris. Bottero’s vertical edge grinding and bevelling machines allow the highest quality results to be achieved when processing edges, thereby guaranteeing a perfect finish and allowing use in the most elegant applications, in which quality is considered an essential element. The vertical edgers and bevelling machines are designed to ensure maximum production and maximum reliability. The availability of numerous machine set-up configurations allows you to choose the right product for both simple and extremely advanced processing operations.

Condition: used, functionality: fully functional, Layher Ledger 1.40 m Used – Strong Horizontal Connection for System Scaffolding This used Layher ledger of 1.40 meters is an essential component of the Layher Allround scaffolding system. The ledger provides a solid horizontal connection between uprights, thereby contributing to the overall stability, strength, and safety of the scaffold structure. The ledger is made from galvanized steel and is suitable for repeated professional use in construction, renovation, and industrial projects. 🔧 Technical Specifications Brand: Layher Type: Allround system Length: 1.40 meters Material: Galvanized steel – weather-resistant and durable Condition: Used, technically inspected and fully functional ✅ Why choose this used ledger? Genuine Layher quality at a competitive price Gsdpfsw H Sbgjx Abdjil Ready for immediate use, suitable for heavy-duty applications Ensures stable horizontal connections Fully compatible with Layher Allround components Available from extensive stock Application This ledger is used in Layher Allround scaffolding systems to create strong horizontal connections between uprights. Indispensable for maintaining structure, alignment, and even load distribution, especially with multi-level scaffolds.

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Gedpfx Aorq I I Nsbdeil Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Technical details Print type Inline inkjet system Ink type Oil-based pigment ink (cyan, magenta, yellow, black, gray) Print resolution Standard/full color black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 300 dpi (secondary scan direction) Fine Black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 600 dpi (secondary scan direction) Number of gray levels Black: four (4) gray levels Cyan, magenta, yellow, gray: 12 shades of gray Data resolution standard/full color Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 300 dpi Fine Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 600 dpi Line smoothing 600 dpi × 600 dpi Warm-up time Max. 2 min. 30 sec. (at a room temperature of 23 °C) Print time to 1st page*1 Max. 5 sec. (A4 portrait feeder) Copy time to 1st page*1 Max. 7 sec. (A4 portrait feeder) Print speed *2 *3 A4 portrait feeder Simplex: 165 pages per minute Simplex: 80 sheets/minute (165 pages per minute) Letter portrait feeder simplex: 165 pages per minute simplex: 80 sheets/minute (165 pages per minute) A4 landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) Letter landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) B4 (JIS) Landscape feeder Simplex: 102 pages per minute Duplex: 44 sheets/minute (88 pages per minute) Legal landscape feed simplex: 104 pages per minute duplex: 44 sheets/minute (88 pages per minute) A3 landscape feeder simplex: 88 pages per minute duplex: 42 sheets/minute (84 pages per minute) Ledger landscape feeder Simplex: 86 pages per minute Duplex: 42 sheets/minute (84 pages per minute) Paper size: Standard tray Max: 340 mm × 550 mm Min.: 90 mm × 148 mm Paper cassette Max.: 297 mm × 432 mm Min.: 182 mm × 182 mm Print area 314 mm × 548 mm Guaranteed print area * 4 Standard: margin width 3 mm Gsdpfxjrrxn Ss Abdeil Max. margin width 1 mm Paper weight Standard tray 46 g/m2 up to 210 g/m2 Paper cassette 52 g/m2 up to 104 g/m2 Paper feed capacity Standard tray stack height up to 110 mm Paper cassette stack height up to 56 mm (x 3 cassettes) Output table capacity Stacking height up to 60 mm Network interface Ethernet 1000BASE-T/100BASE-TX/10BASE-T (2 channel) Storage capacity 4 GB Hard disk *6 Capacity 500 GB Available storage space Approx. 430 GB Operating system Linux Power supply 100 to 240 V, alternating current, 12.0 to 6.0 A, 50 to 60 Hz Power consumption Max. 1200 W

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Gedped Dczzefx Abdoil Please don't hesitate to contact us.

Condition: new, The edger is used for double-sided edge trimming of boards and logs. The use of automatic width adjustment, smooth feed, and laser markings on the cutting guide enable optimal use of edged boards. Technical specifications: Minimum cutting width: 60 mm, maximum cutting width: 500 mm (horizontal clearance: 700 mm) Edge thickness: max. 65 mm Infeed table: 2000 mm Pick-up table: 2200 mm Giodpfx Ajwb Uwgsbdol Distance between electric saws can be adjusted via the control panel Feed speed: uniform Saw diameter: 350 mm Number of saws on the spindle: 2 Main motors: 2 x 5.2 kW Machine weight: 1000 kg – Laser for marking the cutting line (2) – Electronic width measuring controller ANP 05

Condition: used, Year of construction: 1998, functionality: fully functional, Straight-line edgers Gjdpfx Abjwii D Rjdoil

Condition: used, functionality: fully functional, Layher Auxiliary Ledger 1.40 m Used – Extra Stability for Your Allround Scaffold Are you looking for a used Layher AR auxiliary ledger of 1.40 meters for your scaffolding project? This original Layher auxiliary ledger is an indispensable component of the Layher Allround system, ensuring maximum stability and safety when working at height. With a length of 1.40 meters, this is the ideal size to securely connect working decks and further reinforce your entire scaffolding structure. Key Features - Genuine Layher Allround system material, proven German quality - Length: 1.40 m, versatile for various scaffold configurations - Made of robust steel, designed for intensive use - Used version, fully technically inspected and ready for immediate use - Perfect for construction, maintenance, and renovation Why choose this auxiliary ledger? Giedpfx Abjwzxv Tedel - Provides optimal stability and safety for your Layher scaffold - A cost-effective alternative to new components - Large quantities available directly from stock - Worldwide delivery, wherever your project is located Delivery & Service These used Layher auxiliary ledgers are amply in stock and can be shipped promptly to customers worldwide. Collection from our warehouse is also possible. Want to order larger quantities or combine with other Layher parts such as brackets, ledgers, or standards? Feel free to request a competitive, tailor-made quotation.

Condition: ready for operation (used), Technical characteristics 4-strand chain introduction deck (optional) 3-strand decoder (optional) High performance edger SPEEDFLEX : (Ref C2985) Free roller infeed table Retractable guide aligned to the fixed blade Horizontal roller press 1 fixed blade + 3 mobile blades controlled by MUDATA 3 axis division. Lasers Sawing "downstream". Feed speed: 0-100m/mn Giedpfjtn H Etox Abdel Capacities: Max. passage height: 110 mm. Maximum sawing height: 100 mm. Max passage width: 1 000 mm. Maximum edging width: 710 mm. Max distance between 2 adjacent blades : 570 mm. Minimum distance between blades : 18 mm. Minimum length of the wood : 650 mm. Characteristics : Blade diameter : 400 mm. Rotation speed : 3750 rpm. Blade bore : 85 mm. Blade shaft diameter : 65 mm with counter-bearing Blade motor power : 55 KW (75 hp). Power of feed motor : 3 KW (4 hp). Separator and operator return belt Slatted belt for slab exit (optional) Automatic transfer mechanism for 3 strands (optional) Synchronized 3 strands unloader for introduction on the chainsaw (optional) Power and Motors Pluging: Three-phased Power: 55 Kw Motor: 75 CV Overall dimensions

Condition: good (used), functionality: fully functional, Layher uprights 3.00 m used – original Allround uprights for system scaffolding These used Layher uprights of 3.00 metres are original parts of the Layher Allround scaffolding system. The uprights form the vertical backbone of your scaffold structure and are suitable for nearly any type of construction project, from new builds to renovations. The uprights feature the well-known rosette at fixed intervals, allowing you to quickly and safely connect ledgers, braces, or consoles. Despite visible signs of use, they are in good technical condition and ready for immediate deployment. 🔧 Specifications Length: 3.00 metres Type: Layher Allround system upright Material: Galvanised steel – weather resistant and durable Godpfx Aew Nh U Tebdoil Connection: With fixed rosettes for fast coupling Condition: Used, functionally checked, with normal signs of use Note: export only

Condition: good (used), functionality: fully functional, Various Layher Base Jacks Used – Adjustable Base Supports for System Scaffolding Looking for used base jacks for system scaffolding? We offer a wide range of original Layher Allround base jacks, including both fixed and tiltable versions, with different lengths such as 0.48 m and 0.60 m. These steel screw jacks provide a stable and height-adjustable foundation for your scaffold structure, even on uneven surfaces. Suitable for professional use in construction, industrial, and renovation projects. Examples of available models: • Layher AR Base Jack 0.60 m – Fixed Model For standard Allround scaffolding, coarse thread for quick adjustment • Layher Base Jack 0.60 m – Coarse Thread (Non-Branded) Compatible with various systems, extra robust • Layher AR Base Jack 0.48 m – Fixed Model Compact design, ideal for limited build heights • Tiltable Base Jacks – Used Flexible application on slopes or uneven terrain (available on request) Benefits of Used Base Jacks: Gijdpfx Aow Ddavjbdsl • Fully functional, professionally inspected • Made of galvanized steel, suitable for heavy-duty use • Perfect for height correction and levelling • Coarse thread for fast, precise adjustment • Excellent price-to-quality ratio compared with new material _____ International Trade via BuildingEquipment.eu Our used base jacks are not only suitable for customers in the Netherlands, but are also delivered worldwide by us. Unique advantages: • Worldwide delivery: by pallet, container, or freight carrier • Complete export documentation & bulk quotations available • Can be combined with scaffold frames, brackets, ledgers, and more

Condition: used, functionality: fully functional, Layher auxiliary ledger 1.09 m used – extra reinforcement for your Allround scaffold This used Layher AR auxiliary ledger, measuring 1.09 meters, is a genuine component of the Layher Allround scaffolding system. The auxiliary ledger is used as horizontal or diagonal bracing, contributing to the stability and safety of the scaffold structure. The ledger is offered as a used unit, fully inspected and technically approved for professional use on construction sites. Gsdow Db Siepfx Abdsil Key features: Genuine Layher Allround system component - Length: 1.09 meters - Material: galvanized steel – strong, durable, and reliable - Condition: used, 100% functional - Application: for additional stability and reinforcement of working platforms Why choose this auxiliary ledger? - Enhances the safety of your Layher scaffold - Cost-effective alternative to new parts - Robust design suitable for intensive use - Large stock, bulk orders possible - Worldwide delivery available, fast and reliable

Condition: used, Layher Allround Ledger 1.57 m Used – Strong Connection for Your Scaffold Structure This used Layher Allround ledger of 1.57 meters is an essential component within the modular Layher scaffold system. The ledger provides a robust horizontal connection between standards, ensuring the scaffold retains its stability and load-bearing capacity. The used version is technically fully functional and offers an affordable alternative to new equipment without compromising on safety or quality. Key Features - Original Layher Allround system, proven quality - Length: 1.57 meters - Material: galvanized steel, strong and durable - Condition: technically inspected, ready for immediate use - Application: horizontal connection in Layher scaffolding Why choose this used ledger? - Reliable Layher quality at a competitive price - Robust steel for heavy-duty construction use - Quick assembly thanks to proven Layher couplings Giedpfew Db Nbsx Abdel - Large quantities available from stock - Worldwide delivery possible, regardless of location