Used Donau Dr 32 for sale (39)

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Ljdpfx Ahsx Hgkvo Ushr Machine lamp Quick-change holder with inserts Machine vice

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Lsdpfx Ahorn Riqe Uohr Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Lhsdpomt Ed Refx Ah Usr Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty Lhodpfx Ahswnn S Ro Ujr New paint RAL 7035/7031

Condition: good (used), 1 used rapid radial drilling machine Manufacturer: Donau Model: DR 40 Z No. 1117-5 Technical Data: - Drilling capacity in solid steel ST 60: 40 mm - Drilling capacity GG 25: 50 mm - Thread cutting in ST 60: M 33 - Thread cutting in GG 25: M 45 - Drill spindle mounting: MK Lodox Hpxpopfx Ah Ushr - Spindle diameter: 55 mm - Quill stroke: 200 mm - 18 spindle speeds: 35–1800 rpm - Drilling feeds: 0.075–0.60 mm/rev - Drill column height adjustment: 450 mm - Drilling radius min/max: 305 / 1005 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space required: approx. W 1900 x H 2800 x D 2300 mm - Weight: approx. 1800 kg Technical data subject to change/errors excepted.

Condition: good (used), DONAU DR 23 – High-Speed Radial Drilling Machine Ledpfx Ahjxzqauo Uehr - Drilling capacity / steel approx. 28 mm - Arm reach 700 mm - Morse taper MK3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900 kg Subject to errors and input mistakes

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t Lhsdpfx Ahov Ay T Dj Uor dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation Ljdpfxjxpfgls Ah Ushr

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW Ledpfju Et Nbjx Ah Uohr - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tools - Drill spindle taper MK 4 - Quill diameter 55 mm - Quill stroke 220 mm - 18 spindle speeds 35-1800 rpm - Drill feeds 0.075–0.60 mm/rev Lsdpfx Ahow En Slj Uohr - Column height adjustment 450 mm - Drilling radius min/max 305–1005 mm - Table size 1200x600 mm - Drilling capacity / steel 40 mm - Drilling capacity / cast iron 50 mm - Thread cutting unit / steel / M33 - Thread cutting capacity / cast iron / M45 - Various tools included, see photos Dimensions: LxWxH 1.9x2.3x2.8 meters / Weight 1800 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm Ledsufw S Rspfx Ah Ushr - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Lhodpfx Aeikvcaoh Ujr Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Ljdpjwal Hpjfx Ah Uehr Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: ready for operation (used), Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible. Lodpfx Aox Db U Ujh Uohr

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg Ledpfxoirax Ue Ah Ushr

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Ledox Afn Njpfx Ah Ushr Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Lhjdpfoxn A Spjx Ah Ujr Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Lsdpfxexcyz Ro Ah Ushr Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Ledpfowymtqex Ah Uohr Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Condition: good (used), Year of construction: 1994, machine/vehicle number: 133120, Offer 24506 Technical data: - Drilling capacity in solid steel ST 60 35 mm - Drilling capacity GG 25 42 mm - Thread cutting ST 60 M 30 Lodowndydepfx Ah Uohr - Thread cutting GG 25 M 36 - Drill spindle mount MK 4 - Quill stroke 170 mm - Drill spindle speeds stepless 20 - 3200 rpm - Drill feeds stepless 0.02 - 0.70 mm/rev - Drilling radius approx. min. / max. 490 / 1240 mm - Swivel angle 330° - Table size 1200 x 620 mm - Table height 900 mm - Motorized height adjustment / drill column stroke 450 mm - Hydraulic column + jib clamping - T-slots vertical on the left machine side - Coolant device - Drive 400 V / 5.0 kW - Space required approx. W 1500 x H 2600 x D 1700 - 2500 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 1994, High-speed radial drilling machine Donau Danuflex145 Lsdpjwtq Dyofx Ah Ujhr

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 35 mm arm length: - mm workpiece height max.: 660 mm threading: GG 25 M36 threading: ST 60 M30 drill capacity in cast iron: 42 mm tool taper: MK4 quill stroke: 165 mm Table dimensions: 1200 x 600 mm column diameter: 170 mm work height max.: 900 mm Lhodpfx Asxu Dwgeh Ujr current type: Drehstrom total power requirement: 25 A frequency: 50 Hz connection voltage: 400 V connected load: 6,5 kVA dimension machine xH: 2,3 x 1,7 x 2,4 m weight of the machine ca.: 2,5 t Accessories and Equipment – DONAU DANUFLEX 135 Accessories: ·1 × Drill chuck ·2 × Angle plates ·1 × Machine vice ·1 × Clamping cube Features / Equipment: ·Side drilling table, height-adjustable ·Drilling possible at up to 3 stations (front, left, rear) ·Two-stage spindle gearbox, automatic switching via push button ·Continously variable spindle speed control in each gear stage: 20 – 3,100 rpm ·Continuously adjustable feed rate ·Thread cutting device integrated ·Adjustable depth limit stop *

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Lodpeu N Hdaefx Ah Uohr

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6104, drilling capacity: 40 mm, spindle speed (max.): 2,800 rpm, quill stroke: 200 mm, table length: 1,200 mm, table height: 820 mm, table width: 600 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Machining Data Drilling capacity in solid material (St 60): Ø 40 mm Drilling capacity in solid material (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Thread cutting (GG 22): M 45 Dimensions and Travels Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 Distance between T-slots: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 - 1,290 mm Swivel range: 330° Work table height: 820 mm Quill travel: 200 mm Column travel: 410 mm Table Lhjdpfxowvi I Nj Ah Ujr Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid traverse X-axis (at drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Speed: 15 - 2,800 rpm Feeds (stepless): 5 – 2,000 mm/min Accuracy according to manufacturer Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash in working area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Total height: 2,500 mm Total width: 1,400 mm Total length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital position display

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Lodev If T Tepfx Ah Ushr Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment