High-speed radial drill

DONAU DR 32

Condition: used, Year of construction: 1974, bore capacity in steel (diameter) 32 (St 60) mm arm length 418 / 1018 mm workpiece height max. ca. 400 mm Dcsdpfx Aps Ad Rltjmep table surface area 1200 x 500 mm spindle taper MT 4 quill stroke 190 mm distance table - lower edge spindle 260 - 660 mm table height over floor 800 mm spindle turning speed range 41 - 1800 U/min feeds 0,1 / 0,15 / 0,2 / 0,3 mm/U total power requirement 6 kW weight of the machine ca. 1,8 t

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible. Dedpfezi Duhjx Apmocp

Condition: refurbished (used), Year of construction: 1991, Work table 750 mm x 1200 mm Outrigger travel distance 1000 mm Tool holder MK 4 Dcodpfoz S Tzzex Apmep Drilling capacity 32 mm in steel Threading device Coolant system Documentation

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm Dcods Aa A E Repfx Apmep arm length 1230 mm bore stroke 180 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x2,3 m High-speed radial drilling machines with: - Feed mechanism - Thread-cutting attachment

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm Dcodpfx Apsuiy Ngemop The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm Dcjdozwg Ruopfx Apmjp bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 Dcsdpfx Aoy Aa H Nepmop total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control Dcodpfx Aogxi D Tspmep -Electr. Automatic cooling

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Dcjdjzuarmepfx Apmjp Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Dcjdpemt Ed Rofx Apmop Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW Dsdpfjxa Hf Rsx Apmocp weight of the machine ca. 1,1 t dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Dedpfx Aownn S Repmocp Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t Djdpfx Apezkbqvomjcp

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle Dcsdpfjyi Amwex Apmsp • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Dodpex Hgkvefx Apmscp Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice