Used Door Lite Cut Out Machine for sale (75,753)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 250206, total width: 550 mm, total length: 1,500 mm, total height: 850 mm, empty load weight: 300 kg, Export is possible. Bedpfxeyw N Rgj Aaaoda

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm Bdjdeyxgtuspfx Aaaea cutting length: max. 3.000 mm wire feeding speed: 5 - 120 mtr./min * machine is equipped with chamfering unit by grinding*

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Bodpfx Aaex N Nc Hsaeda

Condition: used, Year of construction: 1989, Diameter max. 75 mm Dimensions (L/W/H) 800x600x1200 mm weight ca. 150 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Bdedsxrg D Rspfx Aaaja subject to prior sale!

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/8311, Offer Number: D08L/8311 Machinetype: straightening and cutting machine Make: HSH Type: for Stuts Bjdewi Thyjpfx Aaaeda Constr. year: 1990 diameter range: 3-10 mm cutting length: 10-130 mm Location: In our warehouse

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Bdjdpfoyxc Afjx Aaasa

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice Bodpfxsv Tz N Ij Aaaeda -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm Bedpodyy Dijfx Aaajda weight: 10 kg

Condition: ready for operation (used), machine/vehicle number: 30116, Arc current at 100% ED: 120 A Voltage: 110V electr. Connection for: 380 or 400 V Required space: 1250 x 900 x 1000 mm Bdsdpfx Aajga Tmyjaea

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Bdodjx H A Rxepfx Aaasa This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,197 h, This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information. Application Types Cutting Bedpsx E Eb Defx Aaaeda

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Resonator: 4kW Co2 Bdsdpfox D R Dxox Aaaoa This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 15 - 350 mm Square tube: 15 x 15 - 350 x 350 mm Rectangular tube: 15 x15 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 40 kg/m max. tube weight: 240 kg Bdjdpfx Aasxgc Aroaea Length: 17296 mm Width: 4271 mm Height: 2933 mm

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 6100 x 2550 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: ??? mm Bodpeyynmrjfx Aaasda Width: ??? mm Height: ??? mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: new, Laser power: 12000 Watt Working range laser: 6100 x 2050 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: 12000 mm Bdodpfx Aasxaykyoaoa Width: 5000 mm Height: 2200 mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Bdedpeyvfuwefx Aaaja Highly dynamic and precise CNC laser machine solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A space needed: 820 x 1220 x 930 mm weight: 750 kg Bjdpfo Sdrfox Aaajda

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 04/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine With guarantee optional: - Mobile table for LEO - Cutting - freight costs - Shipping wooden crate Bsdpfef Epwvsx Aaasda VISIT our sales center with bakery equipment and many bakery machines

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: Bodpfx Aaeywwrfoaeda • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Bjdpfxoywwq Uj Aaasda Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dragon 220 Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Bsdpfx Asx S Ux Esaaeda Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Can be seen working at our factory in Ireland

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 56,409 h, machine/vehicle number: A0235A0225, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, overall weight: 9,000 kg, total length: 9,200 mm, total width: 3,200 mm, total height: 2,300 mm, warranty duration: 2 months, Equipment: cooling unit, dust extraction, emergency stop, Working area 3,000 x 1,500 x 115 mm Control system Siemens Sinumerik 840 D Laser power 4,000 watts Max. sheet thickness (mild steel): 20 mm Max. sheet thickness (stainless steel): 15 mm Max. sheet thickness (aluminum): 10 mm Year of manufacture: 2008 STANDARD EQUIPMENT: - Enclosed machine frame with integrated CO2 laser unit TruFlow 4000 including NitroLine, beam pipe ventilation with N2 and LensLine, cooling unit - Additional high-dynamic Xp-axis - Motion unit for highly accurate processing - Drives with maintenance-free three-phase servo motors - Enclosed beam guidance - Automatic pallet changer with longitudinal conveyor - Laser logbook function - Laser cutting head with 5” lens Bodpfx Aaoxx Ddnsasda - Laser cutting head with 7.5” lens - Quick-change system for cutting heads Programming - Programmable cutting gas selection / pressure control - Programmable power cycles - Automatic sheet outer edge detection - ControlLine - FocusLine Plus - Laser power control - Positioning laser diode - NitroLine - Microweld - PlasmaLine - ContourLine - SprintLine - Spray device - Auto shut-off - Work area lighting - Siemens SINUMERIK 840D control: open control, PC-based, user-friendly operation, USB interface, online help, diagnostic functions, maintenance logbook, RJ45 network connection, 3.5” floppy drive, TFT color display - TruTops laser lite workshop programming - CE marking - Safety devices: multi-beam light barriers, multi-chamber extraction, compact dust extractor and machine enclosure with Makrolon panels Reason for sale: We have purchased a new machine. Turbine completely overhauled in 2024 HF tube almost new Control board almost new

Condition: used, Year of construction: 2021, UltraSharp plasma cutting machine. The machine is fitted with the Burny cnc control ,fitted with a Lincoln Electric 170 amp high definition plasma cutting system including Inova automatic torch height control and UltraSharp cutting technology. It would be capable of a cutting area of 4,000mm x 2,000mm fitted with a Bedpfx Aeyli Hioaajda sectional fume extraction table.

Condition: used, Year of construction: 2022, RUR2500P UltraSharp plasma cutting machine, complete with a Burny 10 icd plus CNC control and a Lincoln Electric Fineline 170 amp plasma cutting system including a nova automatic torch height control, 8m x 2m extraction table with a 8m x 2m cut tume extraction system Bdedpfx Aaeylizyoasa

Condition: good (used), functionality: fully functional, Year of construction: 2009, Working area: 3000 x 1500 mm Laser power: 5000 W Sheet thickness for mild steel: 25 mm Sheet thickness for stainless steel: 20 mm Sheet thickness for aluminium: 12 mm Machine weight approx.: 12,000 kg Operating hours: NC ON hours: 38,900 h Bodpfeyyn Rqsx Aaaeda Laser ON hours: 39,498 h Beam ON hours: 18,649 h (Status as of: 22/01/2026)