Used Doosan 300 for sale (309)

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 New FANUC touch control system 12,000 rpm 2x Renishaw probes BT 40 High-pressure through-spindle cooling Travel (X / Y / Z): 770 / 410 / 510 mm Table: 920 x 410 mm Maximum spindle speed: 12,000 rpm Tool magazine: 30 positions NC system: DN SOLUTIONS Fanuc i Plus Bsdpfjxggciex Aczedk

Condition: like new (used), Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, Doosan DNM 5700, Bedpfx Aoxrn Uqeczjdk It is in perfect working condition. Only replaced due to upgrade to a machine better suited for production. Specifications: 3-axis machining center, fourth-axis prepared, like new. X: 1050 mm Y: 570 mm Z: 510 mm Machine comes fully equipped with: - Zero point Zero Clamp system - 12,000 rpm spindle - BT40 taper with face and taper contact - 30-tool magazine - Renishaw OMP-60 workpiece probe - Renishaw tool probe - Tool breakage detection - 20 bar through-spindle coolant - Internal shower system, allows automatic cleaning inside the machine in a few seconds - Siemens Shopmill control - Programmable chip conveyor - Spindle chiller - Air conditioning for electrical cabinet

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Bdodpfev Hyf Usx Aczsk Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: excellent (used), Year of construction: 2023, operating hours: 1,260 h, functionality: fully functional, Doosan Puma DNM 5700 Control system: Heidenhain TNC 620 Clamping area of table: 1300x570 mm Travel X-axis: 1050 mm Travel Y-axis: 570 mm Travel Z-axis: 510 mm Spindle speed: 0 - 12,000 rpm Number of driven axes: 4 Coolant pressure: 20 bar Spindle taper: SK 40 Max. load of table: 1,000 kg Tool magazine: YES Number of magazine positions: 30 Bdedow Tni Eopfx Aczjk Machine weight: 6,500 kg Measurement probe Operating hours: 1,260 h

Condition: excellent (used), Year of construction: 2020, operating hours: 1,688 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,120 mm, power: 34 kW (46.23 HP), Vehicle Description Diesel Forklift DOOSAN D25GP Year of manufacture: 2020 According to hour meter: 1,688 hours 2.5 ton lifting capacity 2.12 m overall height 4.70 m lift height 34 kW - Triplex full free lift mast - Sideshift Bdjdpfx Aexxgpmeczsk - Load guard - Work lights - Good tires - Original paint - Simple mechanical machine for such a recent year! Sale price: €11,900 net Affordable delivery available!

Condition: excellent (used), power: 44 kW (59.82 HP), fuel type: diesel, color: other, Year of construction: 2014, operating hours: 7,215 h, Equipment: air conditioning, Year of manufacture: 2014 Drive: Track Number of cylinders: 4 Bsdpfxjw U Ndye Aczodk Empty weight: 8.600 kg Dimensions (LxBxH): 620 x 230 x 264 cm Engine type: Yanmar 4TNV98C CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Korea Condition CE type: CE CW10 Hydraulic quick coupler, Hydraulic tilting bucket, Overpressure system

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, Doosan Puma Heavy Duty CNC Lathe Model: 700 L Year: 2014 - October Control: Fanuc 31i – Model B Turning Dia.: 900mm Turning Length: 3200mm Max Swing: 1030mm Spindle Bore: 160mm Spindle Speeds: To 1500 RPM Machine With: 750mm 3 Jaw Power Chucks Bdodpjwqf U Ijfx Aczsk Programmable Steady

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm Bdjdpfxju U E Edj Aczjk output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Bdsdjxxdmiepfx Aczek Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Bodpexqq Hysfx Aczsdk

Condition: good (used), Year of construction: 2012, operating hours: 7,735 h, lifting height: 4,660 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, Year of manufacture: 2012 Lifting capacity: 3.000 kg Bdedpfxsxpg Tmo Aczjk Maximum passing height: 215 cm CE mark: yes Technical condition: good Visual appearance: good Please contact Mergim Bricori for more information

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition; inspection during operation is possible by arrangement. Bar feeder length: 1,500 mm. Equipped with Fanuc control system, new linear guides and covers installed in 2024. Runs without issues, accuracy within 0.02 mm. Bdodpfsxy N Ihsx Aczjk

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm Bsdpfox At Hyox Aczjdk ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm Bodpfx Asxn Amtjczsdk control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Bodpfx Asw Srarjczedk Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: excellent (used), Year of construction: 2012, CNC lathe with 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port Year 2012 8-inch chuck Spindle bore 65 mm Turning length 400 mm 12-position turret Tailstock Bedpfxexyaulo Aczodk Tray with coolant pump

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS Bdjdpfx Aceq Nqkxezsk MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2010, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model A CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Coolant Filtration System, Spindle Chiller, Machine Weight 31,000kg. S/No. HM12500058 (2010) - CE Mark Bodoxzgcxepfx Aczsdk Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Bsdpfx Asx Arr Ieczjdk Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Bjdpfoxxdwzex Aczjdk Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,750 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Bodpjw Afrdofx Aczjdk Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935 Bedpfx Acevg Nq Hszodk

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm Bsdpfx Ajw Dkfljczsdk MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Bdsdpfx Aexzga Dsczjk Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Bedpsxwqtaefx Aczedk Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning