Used Doosan 300 for sale (293)

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, Nwsdpfx Aew Npz Ienfsf 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, Nwjdpswq Iwxjfx Anfef pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Nedpsxm Sxvofx Anfowf Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, Nwedpfx Ajxv Udgjnfof through spindle coolant, swarf conveyor, Low Volt light.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Nwodewwtrbepfx Anfjf 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2014, lifting height: 3,300 mm, fuel type: electric, fork length: 1,200 mm, Empty weight: 3.851 kg Lifting capacity: 2.000 kg Maximum passing height: 215 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Nwodpsv Tignofx Anfjf Please contact Christian Theißen for more information Units: 4196 Manufacturer: Doosan Model: B20T-5 FFT Year of build: 2014 Condition: Used Data: Max. lifting height: 3,30 m Max. Lifting capacity: 2000 kg Length forks: 1,20 m Drive type: Electrical Domensions LxW (without forks): x 1,09 m Building height: 2,15 m Own weight: 3.851 kg Special features: Sideshift, canopy, windscreen, trailer operation possible.

Condition: used, machine/vehicle number: FDB04-1240-02249, Year of construction: 2013, operating hours: 13,937 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 7.436 kg Lifting capacity: 5.000 kg CE mark: yes Njdpfx Aorh Eb Esnfswf Latest inspection: 2024-01-10 Please contact Johanny Hendrikse for more information

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Nwjdpfsyfh H Uox Anfjf Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, machine/vehicle number: 0025, Year of construction: 2023, operating hours: 200 h, load capacity: 6,000 kg, lifting height: 4,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, drive type: Diesel, Diesel forklift truck Nsdpfxoym Hvdo Anfswf Chassis number: 0025 Mast type: Triplex Condition: Like new Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, heater, load guard, soot filter, full cabin, air conditioning, twin tires, safety light, interior mirror, exterior mirror, beacon, wiper, LED,

Condition: used, functionality: fully functional, machine/vehicle number: 0195, Year of construction: 2023, operating hours: 255 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, total length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0195 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned without warranty Nodpfjym Htvjx Anfjwf Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery type: PzS Battery year of construction: 2023 Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Mast type: Triplex Gearbox: Automatic Technical condition: very good Side shift, Nodpfx Asym Hq Uenfjwf 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, lifting height: 4,710 mm, free lift: 1,263 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, drive type: Diesel, Diesel forklift Nedpfxeym Hq Ie Anfewf Mast type: Triplex Technical condition: normal Sideshifter, 3rd valve, 4th valve, rear work light, front work light,

Condition: used, functionality: fully functional, machine/vehicle number: 2969, Year of construction: 2018, operating hours: 4,255 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,045 mm, power: 12 kW (16.32 HP), fork length: 1,200 mm, empty load weight: 3,190 kg, total length: 1,891 mm, drive type: Elektro, construction width: 1,090 mm, Electric 3-wheel forklift Chassis number: 2969 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Nwjdpfx Aneym Hi Defsf Battery type: PzS Battery year: 2018 Side shifter, 3rd valve, 4th valve, front work lights, overhead guard, CE certificate, seat,

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Nwedpfxey Dunws Anfef An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST, Year 2012, Location: 78176 Blumberg Turning diameter: 760 mm Nedpfx Aoywax Isnfowf Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Equipped with sub-spindle, lower turret, driven tools, and 80-position tool magazine. Hydraulic hollow chuck system 12-position lower tool turret with BMT 65 P Chuck air-blow system for spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the sub-spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-stage clamping pressure for main and sub-spindle Automatic shutdown after production end Hinged belt chip conveyor 2 x power chucks 200 mm 1 x radial AGW 1 x axial AGW Extended high-pressure and paper band coolant system 80-position tool magazine Further information available upon request. Commissioning and training available on request.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Nwjdpsx Ttd Nofx Anfsf

Condition: excellent (used), power: 141.2 kW (191.98 HP), operation weight: 25,100 kg, chain condition: 70 %, Year of construction: 2017, operating hours: 7,494 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Operation hours: 7.494 hrs ROPS Radio back- drive camera Airco Hydr. 2 piece boom Stick : 3m central lubrication Njdpfxexlin Eo Anfjwf all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 Schnellwechsler 1x Bucket with 1m width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Nodpfxeyma H Ns Anfowf Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, load capacity: 20 kg, arm reach: 1,700 mm, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy-duty and large-scale applications across industries such as manufacturing and logistics. The robot features six integrated high-performance torque sensors, ensuring exceptionally precise motion control and safe human-robot collaboration. This technology makes the H2017 particularly suitable for tasks that require both strength and sensitivity – for example, palletizing, machine tending, assembly, and handling of heavy goods. Nwodpfsx Sv Rpox Anfsf Advantages of the Doosan H2017: • ✅ High payload capacity (20 kg) – ideal for heavy lifting • ✅ Extended reach (1,700 mm) – greater flexibility and coverage • ✅ Six torque sensors – allows precise, stable, and safe collaboration • ✅ Intuitive programming – rapid deployment and start-up • ✅ Advanced safety features – compliant with international standards • ✅ Robust and reliable construction – engineered for industrial environments Ideal for: • Palletizing and depalletizing • Machine tending • Assembly and joining operations • Intralogistics and material handling • Automation of manual or ergonomically challenging processes With the Doosan H2017, you get a future-ready cobot that boosts productivity, reduces employee workload, and delivers consistently high quality—every time. _____ Availability We offer ‘as new’ Doosan H2017 units for sale—still sealed in their original packaging. Additionally, we also supply used Doosan H2017 units at a reduced price, providing a cost-effective solution for those seeking premium quality at a lower investment. Please contact us for pricing and lead times.

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Nodsyyd Ulepfx Anfswf Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Njdpsv Hyf Uofx Anfswf Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Nwedpfx Anjyl Iu Eofsf Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. Nwedpfx Aneyzhbfofef -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. Nwodpfeyzgp Usx Anfsf The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,058 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: telescopic, construction height: 2,180 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Torque converter Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 7.00-12 Rear tires type: Superelastic Rear tires size: 6.00-9 Description: In addition to this device, we offer more forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing at attractive conditions are available on request. We will gladly provide you with professional and comprehensive advice about our vehicles. Sideshift, 3rd valve, rear work light, front work light, internal mirror, beacon light, single pedal, seat, Nwedeyadd Sspfx Anfef