Used Doosan Dl 200 for sale (322)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PC-00156, Year of construction: 2008, load capacity: 7,000 kg, lifting height: 3,800 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lifting height: 3,800 mm Redpfx Abew Tzlas Rech Overall height: 2,800 mm Mast: Duplex Fork length: 1,200 mm Maximum fork width: 2,000 mm Minimum fork width: 350 mm Number of wheels: 6 MACHINE DETAILS Fuel type: Diesel Unladen weight: 10,561 kg Dimensions (L x W x H): 3,600 x 2,100 x 2,800 mm Serial number: PC-00156 CE marking: Yes EQUIPMENT Attachment: Sideshift Options: Work lights

Condition: used, fuel type: diesel, fuel tank capacity: 78 l, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,970 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Rcsdpfx Asxb Ay Hsb Rsh Engine type: Yanmar Yanmar 4TNV94L

Year of construction: 2011, operating hours: 5,477 h, condition: ready for operation (used), General Data Measurements width 1863 Measurements depth 4600 Measurements height 1863 Machine weight 6000 Control Unit Rcjdexpyx Aspfx Ab Roh Brand FANUC Model I series Main Drive Spindle speed range 3500 Number of axis 3 Media Chip conveyor Yes Additional Equipment Tool holders 2+2 driven tools Automatic tool measurement Oil catcher Oil mist filter (Losma) This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,520 mm, turning diameter: 540 mm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,595 mm, rotational speed (max.): 3,500 rpm, number of slots in tool magazine: 40, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS CNC control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar capacity: 76 mm Turning-milling spindle X-axis travel: 555 mm Y-axis travel: ±80 mm (160 mm total) Z-axis travel: 1,595 mm B-axis indexing: ±120° (240° total) Tool system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 1.5 s Number of tools in the magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous operation): 15 / 11 kW Lower turret X-axis travel: 185 mm Y-axis travel: 1,640 mm Number of tool positions: 12 Max. speed of driven tools: 4,000 rpm Main spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle mount: ASA A2-8 Spindle bore: Ø86 mm Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous operation): 26 / 22 kW Counter spindle Max. spindle speed: 3,500 rpm Counter spindle travel: 1,565 mm Travels and rapid traverses X1 axis travel: 555 mm X2 axis travel: 185 mm Z1 axis travel: 1,595 mm Rodpfx Abjxf Hrne Rsch Z2 axis travel: 1,640 mm Y axis travel: ±80 mm (160 mm total) A axis travel: 1,565 mm C1, C2 axis travel: 360° (0.001° resolution) B axis travel: ±120° (240° total) B axis coupling angle: 15° X1, Z1, Z2 axis: 24 m/min Y axis: 16 m/min A axis: 24 m/min C1, C2 axis: 200 rpm B axis: 27 rpm MACHINE DETAILS Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - Fanuc 18iT-B CNC control - Capto C6 tool system - 40-position tool magazine - Lower turret with 12 tool positions

Condition: used, TECHNICAL DETAILS Rjdpexcbt Isfx Ab Rjch - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 19.781 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Rcsdpfx Aewqf Uujb Reh Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, Doosan Puma Heavy Duty CNC Lathe Model: 700 L Year: 2014 - October Control: Fanuc 31i – Model B Turning Dia.: 900mm Turning Length: 3200mm Max Swing: 1030mm Rcedpswqf U Isfx Ab Rjh Spindle Bore: 160mm Spindle Speeds: To 1500 RPM Machine With: 750mm 3 Jaw Power Chucks Programmable Steady

Condition: used, Year of construction: 2022, DOOSAN DNM 4500 Year of Manufacture: 2022 Control: Siemens 828D touch screen 2x Renishaw probes Rodpfx Abjxq Rbwo Rjch 12,000 rpm max Through-spindle cooling Travel in X axis: 800 mm Travel in Y axis: 450 mm Travel in Z axis: 510 mm Maximum workpiece weight: 600 kg Tool magazine: 30 positions SK40 - 2x Renishaw probes - Chip conveyor - Coolant tank with pump - Documentation

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 5000 mm Measurements height 2340 mm Machine weight 11700 kg Main Drive Spindle speed range 3500 Number of axis 5 Movement Y-Axis Movement 100 mm X-Axis Movement 255 mm Z-Axis Movement 800 mm Table Number of tslots 2x12 This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2008. It features a max turn diameter of 390mm, bar passage of 76mm, and a max working length of 700mm. Spindle speeds reach up to 3500 RPM with live tools at 4000 RPM. Ideal for complex turning tasks. Contact us for more information about this machine. Application Types Turning Rcodpfxoxdfk He Ab Reh

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Rcjdpfoxlcivjx Ab Rsh

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 Rcodpfxsxcbtzj Ab Roh - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.818 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2022, Serial number: DXCCEBDTVN002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20907 Specifications: Certified until 10/2025 Year: 2022 Hours: approx. 2,500 Power: 79.8 kW Weight: approx. 16,620 kg Track width: approx. 70 cm Machine width: approx. 290 cm New tracks (replaced at approx. 2,100 hours) Engcon EC219 tiltrotator S60 quick coupler Gjerstad grading bucket Gjerstad digging bucket Central lubrication Rcedpfx Aboww Ahrs Rjh Webasto heater replaced Rear and right-side cameras Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:2022 Doosan DX160LC crawler excavator offered on behalf of customer.Machine is in daily operation and will be delivered with 500-hour service completed before sale.Comes with Engcon tiltrotator and two Gjerstad buckets.Delivery by agreement. Own weight: 16620 Model: DX160LC

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: 20220914015 Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Redpfxexbwvce Ab Rjch Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Rodpfxjt H Nbue Ab Rsch Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Rcodpfx Asxcfgreb Rjh Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC long turning lathe Doosan Puma St20G Year of manufacture 2012 Rcodpfx Aewtg Diob Rjh Bar feeder FMB turbo 3-26 Chip conveyor

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] Rcsdpexcbtujfx Ab Reh - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.725 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2013, operating hours: 6,650 h, CE mark: yes Serial number: DINDDA30T3074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21354 Specifications: 2013 model Hours: 6650 (may increase) 270 kW 6-wheel drive Decent tires Passenger seat Repainted Service and maintenance done in-house Rear-view camera Video included Ready for delivery Rcjdpfx Absxdrx Dj Roh Description:Doosan DA30 with only 6650 hours.The machine has two error codes: hydraulic tank temperature and AdBlue tank sensor.Service and maintenance have been carried out by the owner. Hours: 6650 Own weight: CE: Yes Model: DA30

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, swivel head, integrated rotary table. Rcodjxixn Njpfx Ab Rsh

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 4325 mm Measurements depth 8150 mm Measurements height 3760 mm Machine weight 26000 kg Control Unit Brand FANUC Model 31i CNC Main Drive Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 1400 mm Y-Axis Movement 1050 mm Z-Axis Movement 1200 mm Workpiece Workpiece drm 1450 mm Workpiece weight 2000 kg Tools Max weight 30 kg Max tool diameter 130/320 mm Rjdpfsxcqlyox Ab Rech Max tool length 630 mm Media Chip conveyor Yes Additional Equipment Belt-type oil skimmer Triple light tower Shower coolant Through-spindle coolant 70 bar – 75 kW with cyclone filtration Automatic shutdown Tool load monitoring Chip conveyor Workpiece probe OMP60 Tool probe TS27R This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. Rcodpfx Abexcfglo Reh 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] Rodpsxcbtnofx Ab Rsch MACHINE HOURS - Number of working hours : 19.428 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2020, operating hours: 7,608 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21289   Specifications: Redpfx Ajxdhxasb Roch • 2020 model• 7608 hours• S70 quick coupler• Width: 349 cm• KW: 202• Weight: 29,400 kg• Rototilt R8• Grapple• Previously on a gold service contract. Now on a standard service contract• Makin 3D GPS• Includes a 1600-liter grading bucket (bucket in picture not included)• Good undercarriage (see pictures)• Includes spike guard• High and wide undercarriage• Large light package• App-controlled Webasto heater• One operator• Central lubrication on both machine and tilt• Extra hydraulics• 360 camera Description: 2020 Doosan 300LC-7 for sale on behalf of customer.The machine appears to be in very good condition and well maintained. Sold with a lot of extra equipment such as R8 Rototilt, grapple, Makin 3D GPS, high and wide undercarriage, large light package, and app-controlled Webasto heater.Ready to go straight to work for the new owner. Hours: 7608 Own weight: 29400 Total Weight: 29400 Year controlled: no Width: 349 Kw: 202 CE: Yes Engine hours: 7608 Model: DX-300LC7

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model F0i-F Rcedpfx Ajxfmmrjb Reh Main Drive Spindle speed range 12000 Tool taper BT 40 Number of axis 4 Additional Equipment Spindle Cooler: Included Preparation for 4th Axis: Pneumatic Clamping Line Torque Monitoring: Tool Monitoring Systems This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.471 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE Rcedpfx Abjxcbthj Rjh - Electric transformer