Used Doosan Dnm for sale (266)

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Godjy S S Epepfx Aqioka Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), With C-axis With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Gedpfx Aezhmnbeqioka Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Gkodpfx Aqszpw Dpjija Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Godpfx Aov Iq Ezoqiska Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Godpfx Asq Nqkxsqioka Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: good (used), Year of construction: 2019, CNC Turning / Millingcenter Machine type: PUMA TT1300SYYB Control: Fanuc 0i-F Year: 2019 Installation: 2024 SPECIFICATIONS Max. turning length: 120 mm Turningdiameter: 175 / 175 mm Travel X-Axis: 135 mm Y-Axis: 80 mm Z-Axis: 530 mm Rapid motion: (X/Y/Z): 30 / 40 m/min. Main Spindle Max. revolution: 6.000 rpm Gksdpfxezizcve Aqiea Spindle power: 15 / 11 / 5,5 kW Torque: 116 Nm Bar capacity: 51 mm Subspindle Max. revolution: 6.000 rpm Spindle power: 11 / 7,5 / 5,5 kW Torque: 93 Nm Amount of turrets: 2 Tool capacity: 12 + 12 Tool: BMT 45 Driven Tools revolution driven tools: 6.000 Equipment Chip conveyor High pressure pumps: 30 bar 3-jaw chuck: Samchully x 2 mm Oil mist separator Interface barfeeder Partscatcher Parts ejector High pressure pumps: Brinkmann 30 bar inkl. 5 mü Filter Toolholders: 12 Standard- Klemmhalter

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,310 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Gedpfjzb Ndtsx Aqiska Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = - Central lubrication

Condition: used, Year of construction: 2019, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, tool holder type of tool turret 2: BT 40, Doosan VCF850 machining center, continuous 5-axis operation, rotary table, Fanuc control. Gkedpfozihg Uex Aqioa

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Gkjdpfxozluq Ej Aqiea Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: excellent (used), Year of construction: 2008, operating hours: 10,960 h, functionality: fully functional, machine/vehicle number: 01.01.0575, Equipment: documentation/manual, Double-turret CNC lathe (TT type) with a sub-spindle, Dossan Puma TT1800 SY model, featuring various motorized turrets, a center distance of 980 mm, a maximum diameter of 230 mm, a maximum working length of 230 mm, and a bar work diameter of 65 mm, with a bar feeder capable of handling round, square, and hexagonal bars, and a chip extractor. Manufactured in 2008, the machine is in very good condition. Gkedeztz Erepfx Aqisa

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, number of axes: 2, Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Puma 240 MB with driven tools- Year of Manufacture: 2006- Condition: Very good / Fully functional- Control Unit: Fanuc 0iTC Technical Specification Gkedpozb Etwjfx Aqija Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 205 mm, travel distance Z-axis: 550 mm, number of axes: 4, This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Lyax 220 LMS- Year of Construction: 2013- Condition: Very good / Fully functional- Control Unit: Fanuc 31 i- Included Equipment: Short bar loader / Bar feeder (visible connected to the left of the lathe) Gksdpfx Aszb Ergeqioa Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Gkodeydigmjpfx Aqisa Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Gkjdpfx Aszg N Dijqija Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Gkodpfxoy Takis Aqiea Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Gjdpfx Aoiy Nppsqieka Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 222 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-11-03 Gkjdpfxox Itf Aj Aqisa Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), machine/vehicle number: FBA11-2370-03647, Year of construction: 2019, operating hours: 5,673 h, load capacity: 1,500 kg, lifting height: 4,770 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, color: orange, Equipment: CE marking, UVV, Equipped with side shift and fork adjuster. Ready for immediate use. Transportation and trade-in options are available upon request. Gkodpfx Aszb Ddujqija

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm Gkedpfx Aqozbilqsija • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Gkedpfx Aqex Eivpjioa Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Gkodpfoy Tl N Rex Aqija

Condition: used, Year of construction: 2022, operating hours: 560 h, load capacity: 5,000 kg, lifting height: 6,500 mm, free lift: 2,000 mm, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,330 mm, fork length: 1,200 mm, empty load weight: 7,960 kg, total length: 2,987 mm, drive type: Elektro, construction width: 1,475 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 28x12.5-15 Front tires Condition: 80 - 100% Gedet Dduwopfx Aqieka Rear tires Type: Non Marking Rear tires Size: 7.00-12 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 840Ah Battery Manufacturer: MIDAC Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Overhead guard with front and roof window, work lights front + rear, 3rd + 4th valve to fork carriage, rotating beacon, turn signals, BlueSpot rear, hand lever Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, full free lift, safety light, non-creeping tyres, interior mirror, rotating beacon, windshield wiper, seat heating, LED, seat,

Year of construction: 2022, operating hours: 3 h, condition: used, functionality: fully functional, empty load weight: 5,011 kg, fuel type: diesel, lifting height: 4,710 mm, free lift: 890 mm, mast type: triplex, construction height: 2,225 mm, fork length: 1,200 mm, fork carriage width: 1,110 mm, drive type: Diesel, load capacity: 3,000 kg, construction width: 1,300 mm, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gksdpet Dd Iqofx Aqija Transmission: Hydrodynamic Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 28 x 9 - 15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50 - 10 Rear tires Condition: 80 - 100% Description: Full cab with heating, working lights front + rear, 3rd + 4th valve to fork carriage, indicators, hand lever load protection grille, sideshift, 3rd valve, 4th valve, front working lights, heating, soot filter, full cab, interior mirror, windshield wiper, LED, seat,

Year of construction: 2022, operating hours: 33 h, condition: used, functionality: fully functional, empty load weight: 26,851 kg, fuel type: diesel, total length: 5,515 mm, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, fork carriage width: 2,540 mm, drive type: Diesel, load capacity: 16,000 kg, construction width: 2,555 mm, Heavy-duty forklift truck - Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm ISO Class: Pin-Type Mast type: Triplex Transmission: Hydrodynamic Condition: As good as new Technical condition: New Front tires type: Air Front tires Size: 12.00 R20 28PR Front tires Condition: 80 - 100% Rear tires Type: Air Gksdpfx Ast Ilqneqiea Rear tires Size: 12.00 R20 28PR Rear tires Condition: 80 - 100% Description: Full cab with heating and air conditioning, STVO lighting, work lights front + rear, BlueSpot rear, 3rd + 4th valve up to fork carriage, radio, rotating beacon, scales, reversing camera, hand lever Sideshift, fork positioner, Tines individually adjustable Opening dimension: IK- IK from 85- 1925 mm 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, air conditioning, full free lift, scales, safety light, interior mirror, exterior mirror, rotating beacon, windshield wiper, seat heating, LED, seat, 5th valve

Year of construction: 2022, operating hours: 33 h, condition: used, empty load weight: 26,851 kg, total length: 55,150 mm, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, fork carriage width: 2,540 mm, drive type: Diesel, load capacity: 16,000 kg, construction width: 2,555 mm, Heavy-duty forklift truck - Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm ISO Class: Pin-Type Mast type: Triplex Transmission: Hydrodynamic Gkjdpfx Aqjt Dd Scjisa Condition: As good as new Technical condition: New Front tires type: Air Front tires Size: 12.00 R20 28PR Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 12.00 R20 28PR Rear tires Condition: 80 - 100% Description: Full cab with heating and air conditioning, STVO lighting, work lights front + rear, BlueSpot rear, 3rd + 4th valve up to fork carriage, radio, rotating beacon, scales, reversing camera, hand lever Sideshift, fork positioner, Tines individually adjustable Opening dimension: IK- IK from 85- 1925 mm 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, air conditioning, full free lift, scales, safety light, interior mirror, exterior mirror, rotating beacon, windshield wiper, seat heating, LED, seat, 5th valve