Used Double Head Mitre Saw for sale (29,523)

Condition: used, Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm -Weight: 240 kg Itjdpfogzc Iyex Ag Nen

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm cutting height: max. approx. 80 mm Iodpfjv Hgb Njx Ag Njtn

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, OMS FC330R Double Mitre Saw for Wood, Aluminium 2 x 2.2 kW Specification: • Condition – used, after maintenance/service • Manufacturer – OMS • Model – FC 330 R • Main motors – 2 x 2.2 kW • Hydraulic-pneumatic control • Max. cutting length – 351 cm • Min. cutting length – 36 cm • Max. cutting cross-section – 70x160 mm (at right angle) • Max. blade diameter – 330 mm • Extraction ports Ø 60 mm • Cutting angle range from -45 to +45 degrees (right, left) • Vertical clamps for the workpieces • Weight – approx. 600 kg Itedpfsxdxkgjx Ag Njn • Overall dimensions – 405 x 100 x 145 cm (L x W x H) Additional information: • Very good, factory technical condition • The photos show the actual condition of the item for sale • Machine can be powered up and tested on site

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine - Iodpfx Agju R Syce Notn

Condition: like new (used), Year of construction: 2015, operating hours: 24 h, functionality: fully functional, HYDRA is a high-speed double-head quilting machine designed for the furniture, mattress and home textile industries. It automates the processes of unrolling, quilting and cutting fabrics, while increasing production capacity thanks to a double feeding system. Key features: ✅ Double feeding system: Allows to quilt two rolls simultaneously, ideal for sofas and headboards. Single roll feeding mode available in just 20 seconds for high-end mattresses and large home textiles. ✅ Superior sewing quality thanks to a Dürkopp Adler sewing head. Automatic thread trimming (top and bottom) in less than 0.5 seconds. Adjustable tension system for different types of materials. Easy adaptation of sewing patterns. Advanced features: No need for a repair machine: sewing resumes from the stop point. Automatic parking position when the upper or lower thread is used up. Automatic measurement of the maximum sewing area to avoid errors. Motorized adjustment of the roller width. Dqxout Production statistics (stitch length, pattern, sewing time, number of stitches, etc.). Advanced side knives for a clean cut. Error display for quick troubleshooting. Pneumatic system with low air consumption. Itsdpfx Agsvn Twgj Non Advantages: 💼 Doubles the production for sofas and headboards. 🛏 Ideal for high-end mattresses and wide home textiles. 🔧 Easy maintenance thanks to wide availability of parts. 🌐 Online after-sales service (ElektroteksCare). HYDRA guarantees efficiency, pattern quality and precision for competitive production in the upholstered furniture and luxury textile sectors. Request more information

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication Iodjg Db U Aopfx Ag Nstn caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm Ijdpfsgy Dbdjx Ag Notn -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: used, Year of construction: 1988, functionality: fully functional, Equipment: double-sided, Fully Automatic Coffin Cutting Line with Moulding Feeder – Special-Purpose Machine by MBM For sale is a fully automatic, double-sided coffin cutting system with integrated moulding feeder for processing base strips, as well as bead and lid mouldings. The machine is equipped with a gluing station for automated adhesive application to the mouldings. Features & Specifications: Manufacturer: MBM Design: Special-purpose machine – unique in this configuration Application: Automated cutting of coffin parts (double-sided) Itsdpsw Ihdlsfx Ag Njn Includes: - Moulding feeder for base, bead, and lid mouldings - Gluing station - Material infeed and outfeed conveyor belts (one belt is defective and must be replaced) - Offcut conveyor belt for automatic scrap removal Status: Already dismantled and ready for loading and transport This specially engineered system enables efficient, fully automatic serial production in coffin manufacturing with precise cutting and integrated moulding processing. Ideal for manufacturers prioritising productivity, quality, and process reliability. Sale is made without any warranty. Incoterms: EXW 91550 Dinkelsbühl, Germany

Condition: used, cleaned, partially refurbished, with new support plate used, in good condition Manufacturer Graule Type ZS 85 N Itedpfx Agew En Igo Nen GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Itjdpfx Agju R Syps Nen - new exhibition machine -

Condition: good (used), Angro X-14 Double Head Stapler The device is 100% efficient. Description: The „ANGRO X-14” stapler is a modern, efficient stapling machine. It performs saddle stitching with a standard staple and block stapling of up to 60 sheets of paper. Advantages: does not require any operating adjustments, very durable stapling head, large staple magazine capacity (300 ÷ 400 pcs. staples depending on the type), large stapling depth, A3 booklet (A2 when unfolded), Iodpswunghofx Ag Netn flat staple closure Technical data Number of cycles 90/min Power supply 230 V Power consumption 0.18 kW Weight 33 kg Dimensions 535x540x930 mm

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Itedjq Ii Dljpfx Ag Non Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg Itjdpjgylq Ijfx Ag Non

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Itsdpfx Aew E D E Uog Njn Connected load: 9.37 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Weight 3500 kg Iodpfxevz Hxqe Ag Netn Total power requirement 94,75 kw

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, saw blade speed: 2,800 rpm, air pressure: 7 bar, Double-head saw for cutting aluminium and PVC profiles. Features a short-length stop, E555 electronics, two sliding profile holders. Rollers on the movable head. Lubricators for blade lubrication when cutting aluminium. Itedpfxoxb Anqj Ag Non

Condition: used, Year of construction: 2012, Make: NUMALLIANCE Model: ROBOMAC 2106 Year of manufacture: 2012 Iodpfxjw I Rzyo Ag Nstn Double-head wire bending machine Wire capacity up to 600 N/mm² 0.12–0.24″ / 3–6 mm The machine has been professionally dismantled. Inspection available at our site, ready for immediate delivery!

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Itsdpfswhn T Uex Ag Njn

Condition: used, functionality: fully functional, Compact Aseptic Filler (CAF) is an extremely versatile and robust filling system designed to fill a wide range of food and beverage products into suitable pouches under aseptic conditions. CAF filling units are widely used in the food and beverage industries. Such as: ready-to-drink juices, dense, low-acid food and beverage products (such as milk, milkshakes, sundaes, vegetable and meat extracts) and viscous products containing particles (such as concentrates, syrups and extracts from fruits, citrus and tomatoes). The filler is designed with accessories suitable for filling bags from 3 to 20 liters. Itsdpfx Agownqa Ds Njn * The output may vary depending on the format and product to be filled.

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION Itodpfxjw Ucwas Ag Njn NET PRICE

Condition: ready for operation (used), Technical characteristics CNC motorized vertical tilt 22.5-30° external and 90° internal CNC motorized movement of THK sliding head Intermediate workpiece support Blade diameter : 500 mm 2 x 2.2 kW motors, 2800 RPM Minimum cutting length at 90° : 225 mm Minimum cutting length at 22° : 310 mm Maximum cutting length : 5000 mm Mobile control panel Sawing speed (peripheral blade speed) : 66 m/s (with 450 mm blade) and 74 m/s (with 500 mm blade) Carriage translation speed : 20 m/min Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,3 Kw Isdpfxeundf Ro Ag Netn Motor: 2 x 3 CV Overall dimensions Weight: 1400 Kg

Condition: ready for operation (used), Technical characteristics Distance between blades: 225 to 2800 mm Minimum distance between blades at 45°: 385 mm Cutting capacity at 90°: 140 mm Isdpfx Aeuciq Tog Notn Cutting capacity at 45°: 102 mm Max. cutting height: 90 mm Blade diameter: 300 mm Suction: 2 x 80 mm Pneumatic clamping system Simultaneous blade lowering Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 2 x 3 CV Overall dimensions Lenght: 4000 mm Width: 650 mm Height: 1400 mm Weight: 800 Kg

Condition: ready for operation (used), Technical characteristics Blade Ø 550 mm Useful length : 5000 mm Mobile head with motorized movement and electronic management of angles and length Double inclination of the two heads at 45° (internal) and 15° (external) Automatic and semi-automatic cutting with cutting list and intermediate angles PC control panel WINDOWS XP and 10 inches screen Itsdpfx Agjundgbs Nsn Horizontal and vertical pneumatic presses Integral protection Power and Motors Pluging: Three-phased Power: 3 Kw Overall dimensions Lenght: 6600 mm Width: 1900 mm Height: 1830 mm Weight: 2000 Kg

Condition: ready for operation (used), Technical characteristics cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake angle Largeur de coupe130 mm Hauteur de coupe100 mm Diamètre lame300 mm Power and Motors Overall dimensions Lenght: 1400 mm Width: 1600 mm Isdeuaihmopfx Ag Njtn Weight: 500 Kg

Condition: ready for operation (used), Technical characteristics Electric head spacing with programmer Adjustable heads 5 drilling units Pneumatic clamping 4 hp saw motors, 400 mm blades 3-hp drilling motors + scoring unit Steerable drilling unit Iedjub Etnopfx Ag Nstn Power and Motors Overall dimensions