Used Down Stroke Dare for sale (10,534)

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 51 54 3, Spiral drill grinding machines - Year of manufacture: 2006 Hedpfx Aasxnl Ndodsnh - Fully functional, ready for demonstration - Grinding range: 3 – 21 mm - Conical surface grinding - Cross-point grinding - Point angle: 118° - 150°, steplessly adjustable - Speed: 2850 rpm - Weight approx. 25 kg - With additional dust extractor

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 13 h, control type: CNC control, controller manufacturer: ESA, Equipment: european tool clamping system, lower tooling, safety light barrier, upper tooling, BENDING POWER 40 t CNC CONTROL ESA NUMBER OF AXIS 4 HOURS 13 bending length 1250 mm x axis travel 1000mm oil capacity 80 litres motor power 7.7 KW stroke 215 daylight 455 throat depth 410 Hnodpfeyb R I Hex Aadjh table height 800 table width 60 length 2075 width 1700 height 2300 weight 3300kg With 2x stop fingers, manually adjustable (R+Z axis) 1x split set of pointed tools - top 1x rotatable Multi-V die block SAFETY Side safety device (swivel doors) FIESSLER laser safety device Rear safety device (swivel door) 1x remote double foot control 2x front support arms Operating instructions INCLUDED

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm total power requirement 65 kW Hsdpfx Aet Hw Shsadjnh weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Hnsdpfx Ajwvhnheadoh Material quality: Steel and Pre-painted Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: ready for operation (used), System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings and permanent magnet, with documentation. Hedpfxoiquuns Aadonh

Condition: ready for operation (used), System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings, permanent magnet and filter, with documentation. Hsdjiquukopfx Aadsnh

Condition: excellent (used), Year of construction: 1999, Coil-Ø: max. 2.000 mm Hnsdpfx Aasycumvjdsh Coilbreite: max. 2.000 mm Coilgewicht: max. 13 t

Condition: excellent (used), Year of construction: 1999, Coil-Ø: max. 2.000 mm Coilbreite: max. 2.000 mm Coilgewicht: max. 13 t Hodsycumcepfx Aadonh

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, 4 AXIS CNC BACKGAUGE BEAM LENGTH: 3100mm BENDING CAPACITY: 100 TONNES BEAM WIDTH 60mm Hnedpfx Aewphqisadsh DISTANCE BETWEEN FRAMES: 2705mm THROAT DEPTH: 420mm OPEN HEIGHT: 470mm STROKE 200mm WORKING HEIGHT: 960mm AMADA TOP TOOL HOLDERS

Condition: used, functionality: fully functional, Year of construction: 2017, 1x Mixer Holding Tank / Storage Container - Custom-made from V4A stainless steel - Used in our pellet production line as a buffer tank for herbal mixtures in powder form. It features a feed line (right side) from the mixer and a discharge on the left side to the intermediate storage tank. At the inlet from the mixer, there is also an option to divert the mixture into big bags prior to storage. - Material feed via electric auger (top) - Material discharge via electric auger (angled) Filling capacity naturally varies depending on the type and volume of the mixture. With our mixtures, it held approximately 2 x 400 kg. Hodpfsxtmxwex Aadenh All motors and sensors are fully functional.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, operating hours: 21,294 h, working width: 3,050 mm, cutting angle (max.): 3 °, stroke rate (min.): 22 1/min, sheet thickness (max.): 10 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 10 mm Cutting angle: 0.5-3° Number of hold-down clamps: 18 pcs Stroke rate: 22/7 strokes/min Hnedpeyhmhpsfx Aadoh Working height: 900 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: approx. 3,800 x 2,100 x 2,100 mm Machine weight: approx. 8,500 kg Operating hours: 21,294 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Hedpsygw Epofx Aadjnh Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, stroke length: 240 mm, throat depth: 300 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual Hedpeygw Ahefx Aadsnh

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 Hnodpjyk Dhxsfx Aadeh - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - Angle stop Operating instructions

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Hnjdpoygd Auefx Aadeh Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Hjdpfsyif Nrox Aadjnh Machine has cushion in table.

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Hnjdpfx Aajvw Du Usdsh Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: good (used), functionality: fully functional, Year of construction: 2004, Mechanical Swing Beam Shear Make: Schröder Model: MSS 2500 x 5.0 Year: 2004 Technical Data Manufacturer: Schröder Model: MSS 2500 x 5.0 mm Hnjdpfeyizuyex Aadjh Year of manufacture: 2004 Working length: 2,540 mm Sheet thickness: 5.0 mm Strokes per minute: 32 (continuous stroke only) Drive power: 2 x 5.5 kW Rated power: 13.0 kVA Cutting angle: 1.7° Dimensions: L 3.30 x W 1.80 (plus angle stop) x H 1.55 m Weight: 4.4 t Features - Continuous pneumatic hold-down with hard rubber strip - Manual backgauge 750 mm - Angle stop - Manual blade clearance adjustment - Cutting edge illumination - Foot switch All information subject to change and without guarantee. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U Hsdpfx Aeyhq T Nsadonh engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: refurbished (used), functionality: fully functional, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 8,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Parweld XTT202P ACDC – Gas-cooled TIG welding machine 3 Months Warranty Refurbished, tested, and ready-for-use Suitable for: Daily ACDC welding work under 5mm, hobby, DIY, novice professionals. Not suitable for: Production welding, machine construction, construction above 5mm Specifications: • 200 AMP • 230 Volt • ACDC • Pulse • 2/4 stroke • Gas before current / Gas after current • Start current / End current • Up slope / Down slope • AC Balance / AC Frequency • Pulse Frequency / Bi level • Electrode option Includes: 8 metre PRO26 welding torch, earth cable with clamp, gas hose, and trolley. Hnjdpfxjyi Ubye Aadeh Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,583 h, control type: CNC control, controller manufacturer: Bosch-Rexroth, controller model: Rexroth IndraMotion MTX, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 7,583 h, laser power: 3,000 W, punching force: 16 t, punching diameter: 76 mm, sheet thickness steel (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, overall weight: 13,200 kg, Equipment: CE marking, cooling unit, dust extraction, emergency stop, safety light barrier, Extended Station Equipment - Multitool function - MultiBend function - Thread forming function with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast bead function - Engraving function - Deburring and rolling technology function Extended Machine Equipment - 1x additional hydraulic clamp Data Transmission - Wireless Operation Point - Mobile app control Standard Equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Beam protection with direct access - Part chute right - Part flap left - Sensor for part flap - Work area lighting - FocusLine - Retrofit capability for SortMaster Compact - Protective tool - Transport and assembly device TRUMPF Laser - Laser light cable according to standard layout (10m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Hnodpfxsyic Sde Aadsh Punch Head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Forming function - Stroke counter for punches Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Shutdown automation with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Enhanced Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Cooling unit (water-air) - Compact extraction unit - 1st locating pin (inside right) - Ball tables - Good part container for part chute - Chip container for rear removal

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT Hjdpfx Aajtrkmnsdsnh PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,670 mm, travel distance Y-axis: 695 mm, travel distance Z-axis: 585 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 620, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis URBAN PF 6500 milling machine was manufactured in 2009. It features a Heidenhain ITNC 620 CNC control, a 12-position tool changer, and a spindle capable of 6000 rpm. The machine offers a machining length of 6500 mm and supports a table load of up to 500 kg/m. Additional features include a special hydraulic/pneumatic clamping unit and safety fencing. A great opportunity to buy this URBAN PF 6500 milling machine. Contact us for further details regarding this milling machine. Additional equipment • Heidenhain HR130 handwheel: Yes • Control panel: Can be moved along the entire length • Tool cooling: By compressed air/cold air down to -20°C • Automatic central lubrication system: Yes • Chip tray: With 6 drawers • Safety fencing: Yes • Special hydraulic/pneumatic clamping unit: 2x4-fold for bar and profile processing • Quick clamping units: 6 4-fold per side • Pendulum operation: 2 working areas with 2650 mm processing length each • Tool Changer: 12-position tool changer with disc magazine Machine Benefits Qualitative Machine Benefits • Precision control with heidenhain itnc 620, enhanced safety with safety fencing and safety zone Technical Machine Benefits • Clamping stroke: 55 mm • Clamping range: 28-80 mm • Safety zone: 1200 mm • Long machining length of 6500 mm, tool cooling by compressed air/cold air down to -20°c, pendulum operation with 2 working areas for increased efficiency Extra Information Hnodsx D R Dlopfx Aadjh Machine still under power

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) Hjdpexrb Nbjfx Aadsnh - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: good (used), functionality: fully functional, Year of construction: 2004, Motorized Guillotine Shear Manufacturer: Schröder, Model: MHSU V 4000 x 2.5 Year of manufacture: 2004 Technical Specifications Make: Schröder Model: MHSU V 4000 x 2.5 Year: 2004 Working length: 4080 mm Sheet thickness: 2.5 mm Strokes per minute: 34 (continuous stroke only) Drive power: 2 x 2.4 kW Weight: 3900 kg Dimensions: L 4.95 x W 2.0 (plus 0.6 m support arms) x H 1.6 m Equipment • Pneumatic sheet support system, incl. front sheet run-off chute • POS 100 control with 9-step program • Powered backgauge, 750 mm • 1000 mm squaring arm with digital readout • Full-length pneumatic hold-down with hard rubber strip • Rear safety fence • Technical documentation Hodpfx Aoyhfifjadenh All information without guarantee. A demonstration is possible at any time in our showroom.