Used Drilling Center for sale (16,096)

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW Dusdpfey Ralnsx Apwet weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 400 mm Dujdpfxsy Nn Dvs Apwet z-travel 330 mm weight of the machine ca. 2100 kg

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, Dusdsyylzaopfx Apwet table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 0-250-11-1080, functionality: limited functionality, CNC Week Optimat Venture 3 for sale. Dujdpfx Apsy Nmhaewst

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Dujdpfxoyyldho Apwst Fanuc OI series control, spindle probe, Through spindle coolant

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Dedpfx Aey N Du Dopwjut Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Table size 400 x 400 mm Table height 850 mm Dsdey N Duwopfx Apwsut Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SMK00004, SPECIFICATION X Travel 1020mm Y Travel 610mm Z Travel 620mm Duedpfoy E I A Dsx Apwst Table size 1200 x 600mm Spindle to table 140 – 760mm Spindle speed 12,000rpm Spindle motor 15kW Spindle taper BT40 Tool magazine capacity 24 Machine weight 8000Kg Footprint (W x D x H) 3650 x 2900 x 2900mm approx. MACHINE EQUIPPED WITH: - Siemens 840D CNC control (with Shopmill) Swarf conveyor 4th axis Renishaw tool setting probe Through spindle coolant system Lighting Enclosed guarding

Condition: used, Technical details: drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m Dodpfxoy Nk H Tj Apwout CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note Dsdpfoyfh Ixox Apweut No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Duedpfxjyl Numo Apwet Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details turning diameter 410 mm turning length 1250 mm control Siemens 840 D ShopTurn total power requirement 60 kVA weight of the machine ca. 7650 kg dimensions of the machine ca. 5400 x 2600 x 2100 m Additional information CNC lathe DMG CTX BETA 1250 with SIEMENS 840D SHOPTURN Spindle hours: 3956 h Machine under power: 14440 h Duedpsy H Eflsfx Apwst Max. Swing - Ø: 700 mm Max. turning - Ø: 410 mm Clamping length: 1425 mm Turning length: 1250 mm Spindle bore: 95 mm X-travel: 300 mm Z-travel: 1300 mm C-Axis indexing: 360000° Rapid feed X/Z: 30000 mm Feed force X / Z: 4.5 / 7.5 kN Main spindle speed: 4000 rpm Power 100 % ED (40 % ED): 35 (45) kW Max. torque main spindle: 600 Nm C-axis speed: 200 min-1 C-axis torque: 770 Nm Turret positions VDI 40 (DIN 69880): 12 – driven: 12 pcs. Speeds driven tools: 4000 rpm Driven tools power at 2000 rpm: 12 kW Max. torque driven tools: 36 Nm Tailstock cone: MK 5 Tailstock travel: 1200 mm Tailstock rapid traverse: 4 m/min Hydr. Lunette clamping range: 20 - 165 mm, maximum 60 bar Machine dimensions L/W/H: 5400/2600/2100mm Weight: 7650 kg Accessories: - Chip conveyor - Oil dust extraction system - Hydraulic Lunette SMW Autoblock, Type SLU-3 1-ZS - Tool board with tool holder package with rigid and driven tools - Several jaws for 3-jaw chuck Forkardt KS 315 - Tool Eye - Machine documentation

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest Dodpoy Hxp Djfx Apwout The machine comes from the training workshop of a renowned German corporation.

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Duodpfx Apodzp Tbswot Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: used, Year of construction: 2021, x-travel 1270 mm Dujdsy Nfabspfx Apwjt y-travel 660 mm z-travel 610 mm weight of the machine ca. 8680 kg

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm Djdpfx Apsy Nd U Rswsut weight of the machine ca. 7150 kg

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm Dusdpoxrwpdefx Apwet y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. Dedpfx Apoywtxbswsut As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, LOW operating hours! Spindle hours: 1,300 h Power-on hours: 10,700 h Control: SIEMENS 840D SL OPERATE Travel: X = 450, Y = 400, Z = 400 mm Table size: 770 x 410 mm Max. workpiece weight: 200 kg Tool changer magazine with 24 stations Tool holder: SK 40 Max. spindle speed: 15,000 rpm Dusdpfxsy Ifmxe Apwst

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining centre Dsdpfsy Hq Rgex Apwjut Mori Seiki Type NV5000 Year 2006 3 phases CNC Fanuc

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING LINE MACHINE OPD201001 Go! Spindle Motor 5.5 kW – ER32 (Manual) OPD201100 Go! Boring Unit – 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder Dsdpoy Nyypjfx Apwout OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI – English Interface

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY VM1050H FANUC 0IMF1 VERTICAL MACHINING CENTRE YEAR OF MANUFACTURE - NEW - BUILT 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS AIR GUN SPINDLE AIR BLAST SPINDLE PROTECTION AIR CURTAIN 24 STATION ATC TOOL MAGAZINE CHAIN TYPE CHIP CONVEYOR WITH CHIP BOX FANUC 0IMF 1 WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY MANUAL PULSE GENERATOR (MPG) COOLANT FLUSHING SYSTEM COOLANT GUN FRONT DOOR INTERLOCK FULLY ENCLOSED SPLASH GUARDING SYSTEM TELESCOPIC SLIDEWAY COVERS LED WORKING AREA LIGHTING SYSTEM PATROL LIGHT (3 COLOUR) AIR CONDITIONING IN ELECTRICAL CABINET BASIC MACHINE INSTALLATION PARTS CE STANDARDS MACHINE CONFIGURATION CENTRALIZED AUTOMATIC LUBRICATION SYSTEM MACHINE MANUALS & OPERATOR HANDBOOKS STANDARD ACCESSORIES TRANSFORMER (415V, 3PH, 50HZ) BELT DRIVE SPINDLE - 8,000 RPM #40 TAPER WITH OIL COOLER SPINDLE MOTOR FANUC 11.0 / 15.0 KW MACHINE TYPE, CONSTRUCTION & FEATURES  HEAVY DUTY CAST IRON CONSTRUCTION  COMPACT DESIGN  PRE-LOADED BALLSCREWS  HIGH PERFORMANCE LINEAR GUIDEWAYS – X / Y / Z MACHINE SPECIFICATION Worktable Travel (X Axis) 850 MM Saddle Travel (Y Axis) 520 MM Spindle Travel (Z Axis) 560 MM Distance from Spindle Nose to Worktable 150 ~ 710 MM Distance from Spindle Centre to Column 580 MM FEEDRATES X Axis Rapid Traverse Rate 36 M / MIN 3 | Page Y Axis Rapid Traverse Rate 36 M / MIN Z Axis Rapid Traverse Rate 36 M / MIN Cutting Feed Rate 10 / 10 / 10 M / MIN ACCURACY Positioning accuracy (X / Y / Z) 0.008 / 0.008 / 0.008 MM Repeatability (X / Y / Z) 0.005 / 0.005 / 0.005 MM WORK TABLE Table Size 1,000 x 520 MM Max. Table Load 650 KGS T-Slots - Width 18 MM SPINDLE HEADSTOCK Tool Shank BT40 [BBT40] [CAT40] Pull Stud P40T-1 (MAS403) Spindle Speeds 8,000 RPM Max. Output Torque 70.0 / 96.0 NM Spindle Motor Power 11.0 / 15.0 KW AUTOMATIC TOOL CHANGER Number of Tools 24 Tool Shank BT40 Max. Tool Dimensions Ø 80 x 300 MM x 8.0 KGS Tool Exchange Time 1.5 SEC MISCELLANEOUS Power Requirement 25 KVA Power Supply 415V / 3PH / 50HZ Dujdpfxoxtfxce Apwet Compressed Air Consumption / Pressure 280 L / MIN / 6 ~ 8 BARS Machine Dimensions (L / W / H) 3,680 x 2,480 x 2,850 Machine Weight 5,500 KGS

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. TOTALLY AS NEW. BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES. 8 INCH + 6 INCH STANDARD CHUCK SIZE WITH:- Y-AXIS TRAVEL +45 -45 MM - LOWER TURRET (Y2 AXIS) Y-AXIS TRAVEL +45 -45 MM - UPPER TURRET (Y1 AXIS) CHIP CONVEYOR RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF SYSTEM TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 6" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA B-206 RH SPINDLE 8" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-08) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU TOOL MONITORING SYSTEM 9 BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE - MULTI BAR MAGAZINE TYPE REMAINING BAR DISCHARGE DEVICE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AXIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 1 OFF Djdpfx Aoxrpnrspwjut MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE - 4,500 RPM RIGHT HAND SPINDLE - 6,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (+ - 45 MM) LOWER TURRET Y2-AXIS (+ - 45 MM) 8” + 6” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Dia. 215 MM Maximum Turning Dia. 215 MM Maximum Turning Length 620 MM Bar Capacity Left Spindle Ø 65 MM Bar Capacity Right Spindle Ø 42 MM AXIS TRAVELS Upper Turret Travel X1 190 / 90 MM Upper Turret Travel Y1 90 (± 45) MM Upper Turret Travel Z1 660 MM Lower Turret Travel X2 190 / 90 MM Lower Turret Travel Y2 90 (± 45) MM Lower Turret Travel Z2 660 MM Travel A (RH Spindle) 660 MM LEFT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed (RPM) 4,500 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM RIGHT SPINDLE Chuck Size Ø (6”) 152 MM Spindle Speed 6,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-5 Spindle Bore Ø 53 MM TURRETS - UPPER & LOWER Number of Tools (Upper & Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Diameter 32 MM Milling Shank Diameter 16 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids X1 / Y1 / Z1 20 / 12 / 40 M / MIN Lower Turret Rapids X2 / Y2 / Z2 20 / 12 / 40 M / MIN Rapid Traverse Speed - A (Right Spindle) 40 M / MIN MOTORS Spindle Motor - LH 15.0 / 11.0 KW Spindle Motor - RH 11.0 / 7.5 KW Turret Driven Tool Spindle Motor 5.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 3.0 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 3.0 KW Axis Feed Motor - (A) 2.5 KW SUPPLY 35 KVA MACHINE L 4,254 MM W 2,460 MM H 2,230 MM 8,300 KGS

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS Dujdpfjxrnwljx Apwet AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Dsdpfsu A Td Tex Apwjut Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling