Used Drilling Tools for sale (38,288)

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM Gisdpswtd Dyofx Adbsp FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts Gsdpfx Adsfc Hfysbeip -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Condition: used, bore capacity in steel (diameter) 20 mm throat 322,5 mm bore stroke 160 mm bore capacity in cast iron 23 mm feed 1-3000 mm/min tool taper SK 30 Gisdpfx Asyrhynjdbjp spindle speed: 55-5000 U/min table surface area ca. 614 x 370 mm column diameter 145 mm machine weight ab. 550 kg with multi-spindle boring head ARBO 20 Automatic turret drilling head with 6 machining stations TYPE ARBO 20 6 work spindles of your choice incl. spindle guard, flange quill, extended column, special software, without protective cover on the machine table manual included (machine and turret drilling head) machine is in a good condition, liitle used. Preowner is a public institution Standard Equipment Machine table adjustment and clamping at the rear of the machine Full motor protection with PTC thermistors for protection against thermal overload - with insulation class F (155°C) Infinitely variable speed control Protection class IP 54, control voltage 24 V Mushroom-shaped pushbutton (latching) for emergency stop on the control panel Main switch (lockable) Technology computer for cutting data determination and machining cycles Drilling depth programming with automatic rapid traverse forward/reverse Precision synchronous tapping without compensating chuck, max. 10 threads/min (spindle speed dependent) Special software for freely programming machining cycles according to DIN/ISO standards Drilling depth input via numeric keypad Zero point adjustment via external handheld control unit Operating hour counter for spindle, feed rate, and piece count

Condition: good (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Spindle diameter: 130 mm X-axis travel: 5000 mm Y-axis travel: 3000 mm Z-axis travel: 1600 mm W-axis travel: 800 mm B-axis: Double pinion 0.001° Rapid traverse: 10 m/min Table size: 1800 x 2500 mm Table load capacity: 25 tons Spindle power: 37 kW Gijdsyr Nmispfx Adbep Spindle speed: 3000 rpm Tool changer: 40-fold Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. Gedpfx Asv Aalysdbjip - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 150 mm thread capacity 30 M spindle taper MT 4 MK column diameter 125 mm Godpfx Ajwp Tp Dedboip bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm Gjdpeyuiwaofx Adbjip - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: excellent (used), functionality: fully functional, ----- Pos1→ No.: 1405 *1x VDI40→C4 tool holder in as-new condition No. C4-RC2040-51030 Weight/unit: approx. 4 kg Unit price net: €350/each ----- As-new various tool holders: total of 12 holders 3x internal turning tool holders → €150/each 8x external turning tool holders → €150/each Giodpfoyub Eiox Adbjp _____ Turning tool holder, tool holder, lathe tooling, tool post holder, tool holder, -Various types: see photos, additional pictures available on request -The package will only be sold as a complete set Shipping costs on request

Condition: good (used), Spindle mount vertical + horizontal: SK 40 Quill adjustment: approx. 80 mm Table clamping surface: 800 x 340 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 500 mm Speed range: 35 – 1550 rpm Table adjustment: Feeds: 6 – 270 mm/min Rapid traverse: X + Y Drive power: approx. 3 kW Machine dimensions (L x W x H): 1350 x 1300 x 1880 mm Weight: approx. 1750 kg Accessories / Special features: • As-new 3-axis digital readout SINO • Swiveling vertical milling head R + L, quill adjustment • Horizontal milling spindle • Feed on all axes • Rapid traverse X + Y • Coolant system • Emergency stop switch Giodpfxsin Dkto Adbop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders Gedpfx Aswg Rv Nodbjip 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Year of construction: 2021, condition: new, The solution for a quick convenient tool change that an employee can do alone. We have now designed a changing table that can be transported and operated by a forklift, a small electric forklift or even a forklift truck with lifting device. Additional information a) Maximum tool size 1000 x 700 mm long b) Maximum tool weight 1.500 kg c) Minimum tool size 600x500mm d) Total height approx. 600 mm e) Fork insertion height of the forklift 60 mm f) Width of forks up to 210 mm g) Minimum distance between forks 300 mm h) Travel speed of the tool approx. 20-25 mm per second. i) Manual locking after the tool is loaded j) Electric cable length 5 meters. k) motor class IE 3, with 2,2 KW, 400 V, 50 Hz Giodjhtfdtopfx Adbjp l) Weight approx. 500 kg m) Incl. two anchor fittings on the table and two anchor holders for fastening to the press n) Built-in spirit level for leveling on the press o) Emergency switch, on-off switch, switch for forward travel, switch for reverse travel p) Machine body double painted

Condition: used, Article: clamping collets Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Gjdpfon H Nzbox Adboip *

Condition: used, total width: 1,000 mm, total length: 2,400 mm, total height: 2,700 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 7 - X-axis travel [mm]: 950 - Y-axis travel [mm]: 900 - Table length [mm]: 1400 - Table width [mm]: 750 Giedpswnnblsfx Adbep - Drilling depth [mm]: 130 - Drilling capacity [mm]: 50 - Max. Reach [mm]: 950 - Tool holder: MK4 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 - Transport dimensions: 2400mm x 1000mm x 2700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Type: SSB 3 A Gisdjxlqxfepfx Adbsp Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja Gisdpfoyn R N Dex Adbjp weight of the machine ca. 3 t

Condition: ready for operation (used), Year of construction: 2003, bore capacity in steel (diameter) 40.0 mm threading M 24 in St 60 throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 514 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 feed 0.1 + 0.2 mm/U total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm current new price ~ 12.500 euros special price on request Equipment: - robust column drill - V-belt - - infinitely variable speed adjustment - analog speed system - automatic spindle feed - thread cutting device - pole-changing drive motor - height-adjustable work table - machined base plate Godpsynbfpefx Adbjip - feed overload protection - Main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection - Operating instructions in German * Special equipment included : - Thread cutting device * with foot switch, for thread cutting with stop - Machine light - Coolant device in the machine base

Condition: used, Length 800 mm Giodpfxjytx Rys Adbjp measuring range X-axis 520 mm Table dimensions 700 mm weight 900 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, tool diameter 300 mm length 300 mm weight 80 kg range L-W-H 800x400x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Gisdpfoytx Rtex Adbjp possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 1000 mm y-travel 500 mm z-travel 650 mm tool taper SK 40 quill stroke 100 mm turning speed range - power take off spindle 40-2000 U/min Feed 5-2000 mm/min Rapid movement 4000 mm/min Giedpfoytx Ncsx Adbjp Control Heidenhain The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Diosna spiral Gedpfx Adecphnpsbjip Model: SP 80D stainless steel More Knetspiralen upon request!

Condition: good (used), Year of construction: 2002, measuring range X-axis 330 mm measuring range Z-axis 400 mm 1 tool presetter Giodpfx Adjw N S Epebep Make: KELCH, type: Kalimat C34, year 2002 Measuring range X/Z 330 x 400 mm Easy-Wrap Set measuring software 2 adapters VDI / HSK, tool table

Condition: good (used), Year of construction: 1998, measuring range X-axis 330 mm measuring range Z-axis 400 mm range L-W-H 880 x 520 x 990 mm Spindle type: SK 50 (pneumatically fixable, 4×90°) Gisdpjw Ht R Aefx Adbep Measuring systems: Heidenhain optoelectronic (LS series) Measurement: via integrated projector (20× magnification) Device weight: approx. 250 kg

Year of construction: 2018, condition: new, machine/vehicle number: DF0246 Rev0, Tol measurements:2500 x 1800 weight max.:20 t Gjdpfx Adjdxvfmeboip range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Giedpfx Aox Uyzqedbep Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on or Godpfx Ajyn Dkuedbsip *