Used Dry Spray Wall for sale (9,606)

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM paddle dryer (pharmaceutical dryer) total capacity 3100 liters, working volume 2380 liters, product contact stainless steel 1.4435, interior surfaces mirror polished, operating temperature -20/+165°C, operating pressure -1/+6 bar, jacket heating by means of half-pipe coil, vapour filter, mounted on a steel frame. Further information on request, thank you. Prodpfxsr Nclas Alcea

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Prjdpfx Aleh Tyrwecea Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system, type W150 Basket diameter 1,500 mm Usable internal height 950 mm Basket load 500 kg Suitable for pre-treatment before painting and final cleaning with cleaning agent Complete stainless steel design including: - Stainless steel pump, frequency-controlled - Integration of conductivity probe into the PLC - Automatic level replenishment - Electric bath heating (indirect) Podpega Dqljfx Alcsra - 2 tank system - Eco-rinsing - 3-dimensional pulse air blow-off - Bag filter system - PLC control, Siemens S7-300, with operating panel - Direct drive for the cleaning basket - Mist extraction - Level control - Chip/particle filter with bath cover plate - Pulse compressed air blow-off including soundproofing hood - Oil separator PPT 100 - Pump-out device/bottom cleaning with drain valve - 2 units of drive/transport system

Year of construction: 2003, condition: good (used), dryer dry-air KOCH CKT 300, 300 m³/h, year: 2003, price: 6.900 €, contact: Mr. Rainer Eckerle Pjdpfx Aled E N Nzjcjra

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. Prodpsrywyasfx Alcea - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: as good as new (ex-display), Year of construction: 2017, UNION CM10 SP TWIN Double cabin: No. 1 washing cabin, No. 2 cooling cabin equipped with No. 3 pneumatic doors. Prodor Duq Uopfx Alcja "Pass-through" type the baskets are loaded from one side and unloaded in the opposite side performing the complete cycle. The parts are loaded with a mobile trolley on the side of the washing cabin and transit inside the cooling cabin and then unloaded from the side of the cooling cabin. - Advancement between booths automatically via sideshift. - Basket rotation with safety clutch. - Possibility of loading a basket ø1060mm useful inside 980 mm. - Internal useful height 1000 mm. / Max. load capacity. 500 kg. - Washing tank 280 lt. with level restoration and stainless steel axial washing pump. - Dosatron soap dispenser on wash tank 3-10%. - Rinsing tank 250 lt. with level restoration and axial washing pump in stainless steel. - Plant constructed of AISI 304 except for safety ground tank, external structures and external paneling (painted FE). - Safety ground tank at the base of the plant. - Total thermal insulation. - No. 2 External trolleys with drip tank + No. 2 Baskets ø1060 internal useful 980mm. - Automatic doors with safety barriers. - N°3 Bag filters (N°2 on washing 25 micron - N°1 on rinsing 10 micron). - "Union DC60" oil separator. - High-pressure blower, side air blade positioned. - Drying fan with electric heating elements. - Vapor aspirator - Emptying pump. - No. 2 Cooling Fans. (Water Chiller NOT included in the quotation). - PLC SIEMENS S7-1200 with TOUCH PANEL KTP 700 BASIC + Gate Manager for remote assistance.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Pjdpfx Alexm U Exscera Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 84 kg, input voltage: 230 V, We offer a brand new, unused Güntner dry cooler, complete with an independent temperature control system featuring fan speed regulation. This unit is typically used to dissipate heat from a process or system into the surrounding air without using water. It is suitable for applications where a closed water/glycol circuit needs to be cooled. Prjdpfx Aezl H A Tjlcja

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. Pjdpfofiwg Tsx Alcora A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1059mm x 1077mm Internal dimensions: 970mm x 975mm

Condition: new, 26-HT-Wooddry365-SET Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Prjdpfx Alewzzg Ijcoa Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Predpfx Aevuqg Sjlcoa Can be viewed in Vilnius. If you have more questions, we will be happy to answer.

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Ultimate Pressure: 0.2 Pa Pjdpfx Ajxlikmelcsra Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Year of construction: 2008, condition: excellent (used), For sale: a lightly used drying tunnel from the Hymmen brand. Prsdpfxohabf Aj Alcoa Year of manufacture: 2008; maximum workpiece width: 1,300 mm, 400 V, suitable for UV coatings and water-soluble coatings with up to 5% solvent content, materials: wood and plastic.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Delamination testing plant for laminated wood Prodpfx Alox S E S Aocea

Condition: new, Year of construction: 2026, We have to offer you: TPW1010 paint wall Working dimensions (mm): 1000 (width) x 800 (depth) x 1000 (height). Total dimensions (mm): 1200 (width) x 1200 (depth) x 2200 (height) Standard equipment: • Fan power: 1.5 kW, • Capacity: 4500 m³/h, • Compression pressure: 930 Pa, • Lighting: 2 x 18 W, • Ex explosion-proof fan, • 3-stage air filtering, • Paint stop filter, Bymtqagwao • Filter nonwoven fabric, • IP 66 control panel, • Hermetic lighting IP 65. Our cabins are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. Psdpfxed S N Naj Alcora We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. products have a WE certificate. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: ready for operation (used), Laboratory drying oven, heating cabinet, and incubator Shelves adjustable in height at multiple levels Several shelf inserts available Temperature range: 0-250 °C Internal dimensions LxWxH: 500 x 500 x 480 mm Psdpfx Alsyk Emijcora

Condition: used, functionality: fully functional, For sale are 2 Koch CKT 1500 drying plants. One unit from 1999 with 4 drying containers (3x800l/1x1200l), and one unit from 2003 with drying containers (3x100l, 3x200l, 3x300l, 1x400l). The dryers are fully functional and still in operation, and can be inspected until mid-September. Sale is complete with piping, without Koch conveying technology. Price upon request. Psdpfx Aow Ry Axelcera

Condition: ready for operation (used), Stork dry breader No nameplate Belt width: 63 cm Pjdpfsykkkgox Alcjra Dimensions: 300x130x180 cm

Year of construction: 2014, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, The KraussMaffei polyurethane injection presses are designed specifically for high-volume off-site timber frame production. With large 12.5 m × 3.3 m platen capacity and up to 260-ton clamping force, they allow full wall panels to be injected and in a single operation—delivering consistent insulation, structural stability, and repeatable quality. Integrated high-pressure metering and mixing systems ensure precise polyurethane dosing, while automated conveyors and positioning systems streamline panel loading and alignment. The result is faster cycle times, reduced labour, and factory-controlled insulation performance—making large-scale offsite timber frame manufacturing more efficient, predictable, and scalable. Prsdpfsyrh Ifex Alcja In short: Factory precision. Faster panel production. Consistent injected insulation for modern timber construction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: FI125, 1 ABUS LW wall-mounted slewing crane, 125 kg rated load / lifting capacity Jib length 5 m, 125 kg rated load With Abus GM chain hoist, rated load 125 kg Weight incl. wall bracket approx. 250 kg Complete with chain hoist, cable trolley, trolley and small parts Slewing range 270° Prsdpoyl Sx Uefx Alcja Item location: 75053 Gondelsheim The system is fully dismantled and available immediately Shipping by freight carrier or collection Please enquire for shipping costs by postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: FI126/4 / FI128/5, 1 Demag KBK II Wall-Mounted Slewing Crane, 250 kg rated load Psdpfjyl Syfex Alcsra Crane available 2x!!! Jib length 4 m, rated load 250 kg Includes Demag PK chain hoist, rated load 250 kg (older model) Weight incl. wall bracket approx. 200 kg Complete with chain hoist, cable trolley, trolley and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping via freight forwarder or collection Shipping costs on request according to postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP189/K312.W7, 1 Vetter wall-mounted slewing crane, 500 KG payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500KG - 0.5t payload with chain hoist, payload 500KG (2 lifting speeds) Total weight approx. 500 Kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, undercarriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Prjdpfxoy Uflhe Alcja Shipping via freight forwarder or collection Please inquire about shipping costs based on postal code.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 355 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,800 mm, The AVIKO 60100 G3 DRY ADVANCED detects flaws on steel balls with diameters ranging from 60 to 100 mm. Customers can control the system via the PC/PLC and its intuitive HMI, with access to software statistics, protocols, sorting history, video manuals, and direct connection to the machine monitoring software Precision Viewer. All primary movement elements are driven by compressed air or electric motors. The Advanced model is equipped with advanced eddy-current probes and incorporates the eddyvisor C instrument for precise crack detection. For operational efficiency, a loader and outlet holder are included as standard features. For more details please visit our website. Prsdjy H Dmbjpfx Alcoa

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: CR2358, 1 Carl Stahl wall-mounted slewing crane, 500 kg load capacity / leverage Outreach approx. 3.5 m, 500 kg - 0.5 t load capacity with steel chain hoist, 500 kg load capacity Total weight approx. 250 kg Year of manufacture 1985 Complete with lower wall bracket (upper bolt is connected to the building), jib, chain hoist, cable carrier, carriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Shipping by freight forwarder or pickup Please inquire about shipping costs based on your postal code. Prjdpfszgcixsx Alcea

Condition: excellent (used), mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K ensures that cell and tissue cultures growing in vitro experience environmental conditions that closely mimic the physiological values ​​of the organism. mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K provides in vitro growing cell and tissue cultures with environmental conditions that closely resemble the physiological values ​​of the organism. Interior volume: approx. 160 l Weight: 70 kg Air circulation: via fan Cooling: refrigeration unit Temperature display: setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15 °C to 70 °C at 23 °C ambient temperature Temperature stability: +/- 0.2 K over time Humidity display: setpoint and actual value display Humidity range: ≥95% Humidity stability: +/- 2.5% CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 stability: +/- 0.2% CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 amps W x H x D = 130 x 85 x 70 cm Pedpfx Aoyfq U Ijlcsra Financing through our bank is also possible. komplett-konzept.leasingo.de Buy incubators and other products at great prices - Here you'll find products from professionals for professionals - Find more attractive offers in our shop