Used Spray Dryer for sale (3,275)

Condition: used, Used Niro model Mobile Minor Size 0.8 stainless steel spray dryer. Evaporation capacity approximately 1 to 7 kg/h (depending on the product). Unit measures approximately 800 mm diameter x 700 mm straight side and 700 mm conical base. Unit is fitted with a top cover with pneumatically operated raise and lower. Unit includes top-entry spray nozzle, cyclone, collection pot, GEA cartridge filter, electric heater, peristaltic pump and fan. Also includes HMI control panel and a main electrical control panel. Kjdpfx Ageyw S Unsnelt

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Kljdpfoygvmrsx Agnot Click on the link below to see a video of the machine running.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Klodpfxoxv A I Ho Agnet

Condition: ready for operation (used), Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment. Kljdpfx Ajv Edwregnet

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Kedpfjxgg Hbjx Agnjlt Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: used, Year of construction: 2015, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Ksdjx R Talepfx Agnelt

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Kjdpouk Ehxsfx Agnolt

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Kljdpfx Aey Rflyjgnot Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Kjdpfjy Iplfex Agnolt 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Kledpfx Aged Sm Dionst Max temperature: 700 C °

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: - Screens - Screen support edges (mounting frames) - Sealing rubbers The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: - Spare drive motor - Main bearing (2x) - Fan housing - Pulley - Gearbox for screen scraper drive Klodpoym Ag Eofx Agnst Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Kjdpfxjxaxr Nj Agnslt

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Klodpfxjxhfc Re Agnot Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Kjdpfx Aoy R Tdwsgnjlt

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Kedpfxoyr Aiqo Agnslt

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Kodpfxerp D Uxs Agnjlt Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm Ksdpfx Asyzaamjgnslt inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Kljdpsyy U I Njfx Agnot Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: Ksdpfx Aoq Nfuzsgnjlt - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Kledpfxoq Igyvj Agnot Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system Kledpfxsy Tmrmj Agnot - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070139, working width: 1,300 mm, suction capacity: 12,000 m³/h, overall weight: 5,000 kg, workpiece height (max.): 80 mm, Submitting a bid obligates you to collect the item by the deadline of June 22, 2026! TECHNICAL DETAILS Working width, max.: 1,300 mm Workpiece length, min.: 300 mm Workpiece thickness, max.: 80 mm MACHINE DETAILS Traversing system: CNC-controlled with oscillating arms Air supply, spray booth: 12,000 m³/h Extraction: 12,000 m³/h Fan power: 7.5 kW Spray guns: 4 pieces Power, main motor: 15 kW Voltage: 400 V Current consumption: 32 A Total power: 15.6 kW Working pressure, max.: 120 bar Klsdpfx Agoy Tvc Usnst Dimensions & Weight Dimensions in assembled condition: 7,000 x 4,300 x 3,200 mm Dimensions (L x W x H): 11,000 x 2,400 x 2,400 mm Weight: 5,000 kg Transport packages: 4 pieces EQUIPMENT CE marking Spray gun Pump type: Wagner Number of spray booths: 1

Condition: used, Year of construction: 2020, Model: OptiCoater 600 Year of manufacture: 2020 Condition: Used Serial number: E022210405068 Stock number: 3166 Belt width: 600 mm Power: 3 x 400V, 50Hz, 3kW Klsdpoyz Rgdefx Agnot Dimensions: 1800 x 1350 x 1450 mm Weight: 456 kg

Condition: excellent (used), Year of construction: 2022, Atlas Copco FX 300 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Ksdpfx Agswhwubonolt Flow rate: 18,00 m³/min

Condition: good (used), Year of construction: 2014, Almig ALM260 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Kljdjwhwlyspfx Agnet Flow rate: 4,00 m³/min