Used Spraying Automat for sale (24,405)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail Blsdpefy T Arofx Adhsp With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 Blodpjz Hb Dfsfx Adhsp - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer - Extinguishing system TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Year of construction: 2018, condition: ready for operation (used), I sell the 4-side spraying automat Automatica 90° feeding system Bodpfxow Ancfs Adhslp 4 x 2 spraying guns from each side Feeding system with motors. Good condition. Available immediately.

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey Bodpfs Aba U Eox Adhslp and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: excellent (used), Year of construction: 2015, I sell the spraying automat Superfici Magnum. Configuration: Bljdpfx Adswg Tunshsp 2 arms - 2 heads x 2 guns (4 guns total) Manufacturer: SCM Superfici Model: Magnum. Working width: 1350mm Year 2015. Available immediately. Fully working.

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1 pcs. - Number of installed spray devices 4 pcs. - Number of material pumps 1 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm Bledpfx Aozv Tczsdhep - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Bedpfx Adskwct Ujholp Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning Bsdpfx Adezvaz Dehslp

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying 2 pcs. Edge sanding aggregates tiltable. Material is immediately dry and useable ! Very good condition. Available immediately. Possible to test. Blsdjim Eyxspfx Adhsp

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Bljdpfx Aezv Tgtodhsp Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Bsdpfx Adjxw Ux Hoholp Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, Year of construction: 2002, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min Bsdpfx Adozv Tfcehelp - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2005, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled Bljdpfxezv Tdre Adhjp - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. Bedpfx Adjfggcwohjlp ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg. Bedpfxez H U I Rs Adholp

Condition: used, Year of construction: 2015, Length 12000 mm Bledpfe Ahkkhox Adhop Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. Bodpfxez D Efns Adholp (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed Bljdpfe Adr Hxox Adhjp - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, CEFLA FINISHING EASY 2000 DUO D Automatic Spray Coating Machine - Manufacturer: Cefla - Model: EASY-DUO D - Year of manufacture: 2008 - Working width: 1,300 mm - Operator side: left - Price: machine has not been overhauled (Overhaul available upon request) - Duo-style spray gun drive - Dry extraction - Exhaust air capacity: 12,000 m³/h - Belt conveyor system - Feed speed: continuously adjustable ~ 2–8 m/min - Belt cleaning via roller cleaning system Bodpfx Ado Agvccsholp - With paint recovery - Paint circuits installed: 2 - Number of spray guns installed: 4 (Up to 8 spray guns can be installed as an option) - Height-adjustable spray guns - Number of paint pumps: 0 - Supply air filter panel - Explosion-proof design - Suitable for solvent-based paints - Suitable for water-based paints - Used machine, in good condition - Length: 4,867 mm - Width: 3,708 mm - Height: 2,780 mm - Total power consumption: 18 kW - Location: in stock - Voltage fluctuations: max. +/- 5% _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training . Upon request, we also offer regular maintenance and servicing of the machine. For more information, please feel free to contact us!

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Bedpfjzd Umksx Adhelp Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Liebisch Type: S 1000 A-TR / 42016211 Chamber-type test equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type test equipment of type A-TR. The device's internal control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range humidity S: up to / 70°C Control range test chamber K: up to / 50°C Control range test chamber S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Reservoir for test solution: approx. / 150 liters Test solution consumption / hour: approx. / 0.7 – 1.0 liters Water filling, base pan KON: 15 liters Weight: 450 kg Condition: used Bedpfezh Ht Rex Adhelp Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply Blsdpfx Adezcdyxshsp 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Liebisch Type: SKBWF 1000 A-TR Liebisch Constamatic Corrosion Testing Device Salt spray, condensation, and combined testing device with automatic control Data according to the nameplate: Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Test chamber: Test chamber volume: approx. 1000 liters Internal dimensions according to the data sheet: Width: approx. 1535 / 1425 mm Depth: approx. 800 / 780 mm Height: approx. 660 / 650 mm External dimensions according to the data sheet: Width: approx. 2600 mm Depth: approx. 1120 mm Height: approx. 1210 mm Electrical data according to the nameplate: Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to the nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Technical data according to the data sheet: Max. test specimen load: 10 kg per level Test solution reservoir: approx. 150 liters Distilled water consumption humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Testing procedures: DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 and other corrosion and combined testing procedures Equipment: Automatic control Touch panel / control panel Test chamber made of GRP Temperature test chamber connections Humidifier connections Connections for relative humidity Air pressure connection, two-component nozzle Flow control, test solution Test specimen grids / insert grids Test specimen holders NaCl test solution supply Deionized water supply Compressed air connection Weight: 450 kg Condition: Bsdpozba N Tsfx Adhjlp Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible by arrangement and are highly recommended. Condition: used Scope of delivery: (See picture) Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone.

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm Bodpfjy E Uk Isx Adhslp • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Bedpfozvwi Esx Adhslp Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6