Used Drying Furnace for sale (3,180)

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Psdjxcybkspfx Abusrc Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: as good as new (ex-display), Vacuum drying cabinet Internal dimensions: 700 x 700 x 600 mm (depth) Heating output: 3 kW Temperature range: 1-120°C External dimensions: 1280 x 950 x 1280 mm Pressure range: Atmospheric pressure - 0 bar (not suitable for overpressure) A suitable vacuum pump will be supplied depending on the application. Prsdpfx Aefbl T Njbuoc Power supply: 3-phase, N, PE, 400V, 50Hz, CEE plug The internal components can of course be completely removed!

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Prsdjd I T Exopfx Abusc For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the Pjdpfx Ajzbr U Usbusrc empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters Podpfsyxl Epox Abusrc -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Prsdpfx Asvcdr Debuec

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Prjdpfx Aoiryyajbuoc Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes Predpfx Aboy Avmlouoc -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: used, Manufacturer: David + Baader, Kandel Type: 10880.3 Machine type: Industrial furnace / Chamber furnace / Heat treatment furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories, and workshops and is ideal for heat treatment, drying, or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Design: Electric chamber furnace Condition: Used Further technical data available upon request or as per the nameplate Features and advantages Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Pedeznv Dfopfx Abuerc Suitable for continuous operation Proven German quality Possible applications Heat treatment of metal parts Annealing and tempering processes Drying processes Laboratory and testing applications Research and development Workshop and production operations

Condition: used, Edwards Edwards iXH4545H – Industrial High-Vacuum/Dry Pump For sale is an Edwards iXH4545H, MK1 HV MM96 Black EMS version. This unit comes from a technical corporate environment and belongs to the high-performance iXH series from Edwards, which is used worldwide in industrial high-vacuum and coating processes. Device Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Data (iXH series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas and configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typ. 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high-vacuum/dry pump from the 4500 series. It is typically used in: PVD / CVD coating Semiconductor industry Process chambers / vacuum furnaces Research & Development Applications with high gas load Psdpfezixyfex Abujrc Chemical/corrosive process gas environment The iXH series is known for its high reliability, robust design, and 24/7 operability. Weight: approx. 890 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, functionality: limited functionality, Technical specifications Prsdpfx Aoznv Eijbujc Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical data according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Unfortunately, 2 rotary knobs are broken, but the potentiometers still work. However, it is unclear what setting they correspond to. This is more suitable for hobbyists.

Condition: new, ULVAC Dry Vacuum Pump Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for demanding process applications Dry vacuum pump Predpfxszdqtgs Abusc ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features The LR series pump is designed for load-lock chambers and PVD processes. ULVAC's unique aluminum design enables a very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Encapsulated motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents wear of internal pump parts when exposed to corrosive gases. (LR Series) Designed for process gases that generate powdery by-products, such as Si crystal growth furnaces Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2020, condition: new, Kreuzmayr fruit drying cabinet OTS 4 drying surface 4m³ stainless-steel construction Prjdpfxjygm Ie Abuoc

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Location: This lot is located in Wellingborough, Northamptonshire, UK Podps Afwrbofx Abuorc

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Psdpfjyffqqex Abuerc Price negotiable.

Condition: as good as new (ex-display), functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C Prjdju Hma Nspfx Abujc -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Pjdjzvgiuepfx Abujrc Please check out our other listings and subscribe to our stock list.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). Psdszvxvaopfx Abusrc In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. Psdpfx Abezz A Rrsusrc W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 Psdpfx Ajz I Dziobujrc - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Pjdpfxs Ad U Aco Abuerc Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Year of construction: 1980, Hot chamber furnace Prjdpfxey E Izys Abujc Chamber: 65 x 39 x 22 cm Power: 15.3 kW Max temperature: 1000°C Operating mode: electric

Condition: used, Hardening furnace, muffle furnace NABER type 31S Machine no. 10604, year of manufacture 1973 Temperature range: approx. 1150°C Internal dimensions (W x D x H): 1000 x 700 x 380 mm Heating power: 42 kW Connection voltage: 400 volts, 50 Hz - Simple temperature control - Control unit mounted on the furnace - One heating element is damaged Space requirement: Width 170 cm x Depth 200 cm x Height 200 cm Pedps Agpf Nefx Abuorc Weight: 1550 kg Good condition

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. For inquiries or to arrange a viewing, please contact us at Dr. Dryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Pjdpfx Abjwg R Rmeusrc

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Psdpfjzxggljx Abuerc Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice