useable space 2,7 m3
max. temperature 550 degree
electric heating
number of heating elements 6
insalled power 165 kVA
total power 200 kVA
Uq7hgsmh
usable inside space 1.800 x 1.400 x 1.000 mm
heater Dimension 18,25 x 11,05 x 6,17 m
DIMENSIONS / WEIGHTS
.. space requirements -left/right-: 8750 mm
.. space requirements -front/back-: 3700 mm
Bgntrns3uo
.. total height: 3100 mm
Rollenherdofen WMU VKR 3900g 2000 Bauj. 2004, Schutzgasfähig
Nutzraum: 2000 x 50 (150)
Durchsatz: 600 kg/h
Nenntemp.: 950 °C
Heizleistung: 280 KW
3 Heizzonen je 950°C
Heizlänge: 3900 mm
Nutzraumbreite: 2000 mm
Nutzraumhöhe: 50 (150) mm
Durchsatzleistung: 600 kg/h
Ofenvolumen: 7.1 m3
7 Rekuperator - Strahlrohrbrenner
3-fach Lich...
15
Another 25 days
Industrial furnace / bogie hearth annealing furnace, manufacturer: IUDWI, max. annealing temperature: 950 °C, with trolley and movable flap, workpiece size max. dimensions (WxHxD): approx. 290x210x490 cm, total size of the plant dimensions (WxHxD): approx. 600x600x800 cm, 8 burners
Bpxvsvfsuz
DEGUSSA gas nitriding hardening plant Glow plant
Short term gas nitriding plant with 2007 complete
reconditioned control electronics (Protherm 500)
Usable space dimensions Ø 700 mm depth 1300
Consisting of:
1x switch cabinet
1x gas station completely renewed 2015
Frx20ayn
1x oven
1xcooling station
2x complete retort with gas guide cylinder Mat.1.4864 /1.4841
2x cover complete with motors
good condition - complete documentation available
hardening temperature:620 - 680 °C
Air volume:21 m³/h
Nnobb
gas volume:1,9 m³/h
transport speed:2,4 +0,3 -0,1 m/h
length 8000 mm
width 2400 mm
height 1600 mm
Gdimwa98e
Isothermal annealing furnace Seco Warwick CBG:
Producer: SecoWarwick
Build year: 2015
It is modern fully automatic gas furnace for the normalizing and isothermal annealing heat treatment. Very low gas consumption.
Load in 2500 kg (gross)
Max temp: 1000 C
The furnace has specific air exchange system which avoid to make isothermal annealing process with fg. Keep temperature 930 C and drop temp up to 650 C and keep this during 40 min. All parameters are programmable.
Furnace intended for sale toget...
Roller hearth furnace with electrical/gas heating for treating coated and uncoated sheet metal blanks for hot-forming process
Working temperature max.: 980°C
Material temperatur max.: 930°C + 15 K
furnace:
10 heating zones
inner dimensions: length: 22.630 mm, width: 2.000 mm, height: 350 mm
external dimensions: total lenght (without lifting) 23.400 mm
Width 4.354 mm, Height 3.638 mm, weight approx. 30 t
Xdjeg
Lifting device: L 1.773 x W 4.214 x H 6.278 mm, approx. 4t
Return transfer: L 23.35...
15
Another 25 days
Industrial furnace / bell annealing furnace, manufacturer: MAERZ, max. annealing temperature: 860 °C, with fixed drying trough and movable top/cover, workpiece size max. dimensions (WxHxD): approx. 350x380x300 cm, total size of the plant (opened), dimensions (WxHxD): approx. 25x6x8 m, with office container, control system, switch cabinet, 22 burners
Cipnuxzyw
Eliog annealing furnace
Here we offer a passable annealing furnace.
Technical data
Temperature range: 70 ... 200 °C
Working temperature: max. 200 °C
Airflow: horizontal
circulating air fan: 4 pieces of 5,5 kW each
exhaust fan: 1 piece a 7,5 kW
Heat output: 396 kW (4 heating groups of 99 kW each)
Connected load: 419 kVA
Nominal voltage: 3 x 400 V; 50 Hz; PE
Protection class: IP 65, IP 20 (heating)
B2lxyp8g
Noise emission: < 70 dB(A)
Door: 2 rolling gates, inner rolling gate with heat-insulated el...
For sale is a
Annealing furnace Furnace
From
Artur Nolzen
to 1150 degrees
Chamber size
Bnbg9288bv
20 /19 / 50 cm
9.5 kW
Condition: Used.
Pick up by yourself or forwarding agent. We are happy to assist you in organising a cost-effective forwarding agency.
You are welcome to come by for a tour.
You will receive a proper invoice.
A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust.Indent.Nr.
Subject to prior sale.
If you have any questions you can contact us by phone...
1 industrial surface hardening furnace Forni & Forni
PULSAR 2.7, year: 2011, with car push-in device, volume: approx. 2.7 m ³, 400 V + N + T, 180 kW, max.
Operating temperature 1,150 ° C, ALIMENTAZ.: CH4, ABM. approx. 3,000 x 2,200 x 2,500 mm, throat depth approx. 2,000 mm, slot width approx. 1.150 mm, shelf about 1,400 mm,.
Bdoue8cl78
Batch size-700mm depth 1300 mm
7lczcn8zw
1 control cabinet ROHDE-electric cabinet with Philips programmer
1 gas station-Degussa
1 oven electrically heated DEGUSSA GSRU
1 cow station
2 complete retorts with gas control cylinder lid + motors/Mat.1.4864 + 1.4841 good condition-documentation available
charge weight: max. 30t
useable dimensions(l x w x h): approx. 7.500 x 3.000 x 1.800 mm
support beams: 10 pieces approx. 400 mm
working temperature: 500 -920°C
cooling rate: max. 30 k/h from 900-400°C at max. 20t discontinuously
heating zones: 3
heating: 13 pieces impulse burners
gas connection: approx. 210 Nm3/h
Bfx2o2zrqz
connected load: 24 kW
PLC: Siemens S7
Interior diameter: 610 mm
Interior depth: 880 mm
83n2g8ayf
Temperature: up to 500 ° C
Port: 21 kW
Accessories: Condition: good
Weight: approx. 2.5 t
Degree furnace: 1.400 x 1,300 x 1,200 mm
Ground cover: 1,800 x 1,300 x 2,200 mm
Internal item No.: 19001 spline:
Annealing furnace
Manufacturer: Nagy
Type: KT 64 / 40 / 92
+ Documents (electrical diagram, description Nagy furnaces)
BJ: 83
Maximum temperature: 1000° C
Power: 35KW
Fabr.-Nr: 13728
Annealing capacity: 235 dm³
Interior (Lxwxh): 850 x 52 x 280mm
The last repair was carried out at the 09.2016.
(dig. Thermostat with thermocouple) for approx. 1000,-euro
The Cabinet has been disconnected for transport and must be connected by the buyer.
Dimensions (Lxwxh...
# suitable for treatment under inert gas
# with rapid cooling by fan
external dimensions (w x h x d): 1500 x 1600 x 2500 mm
Bbaikg3y
useable dimensions (w x h x d): 750 x 600 x 1100 mm
temperature: 1200°C
electrical heated: approx.. 42 kW
charge weight: 700 kg
annealing furnace / year: 2009,
chamber size: 1500x1000x1000 mm (approx),
On8pd
maximum temperatur: 750 °C,
specifications: N2 back gas, computer controlled
PLC
Marx Canal induction furnace with a capacity of 7T. The furnace was build ~1980 and has been modernised through time.
Ojocf
In-line oven for a wide range of heat treatments
Thermal processes (annealing, curing) with the lowest possible energy consumption and total flexibility regarding substrate size
The CALiPSO is used in the manufacture of crystalline silicon solar cells.
The oven features a transport system consisting of ceramic rollers. This means that, in contrast to the metal transport conveyors currently used for in-line diffusion ovens, no metallic contamination c...
Clear Internal Size - 1525x1500x1120mm
Maximum Operating Temperature - 850°C
Normal Operating Temperature - 00°C
Fuel - ELECTRIC
Bmtikmf0s3
Furnace Rating - 80KW
Maximum Payload - 2500KG
Mains Supply - 415V 3PH 50HZ
Control Voltage - 110V & 240V
Temperature Control Instrument - EUROTHERM 3504 PROGRAMMER/CONTROLLER
Overtemperature - EUROTHERM 2116 OVER TEMPERATURE ALARM UNIT
Recorder - EUROTHERM 5100 GRAPHICAL PAPERLESS RECORDER
Thermocouples Control: - Ø6mm ST. STL. SHEATHED TYPE ‘K’ – 1 OFF
Ov...
Gas fired billet furnace for brass and copper alloys. Including inlet/outlet automated transport system by billet grippers.
Operational temperature: 925 C
Billet diameter: 254mm (10")
Min. Billet length: 350mm
Mvjjqw
Capacity to heat Aluminium Bronze Billets.
The furnace has 11 zones and 22 burners.
The furnace has 11 zones and 22 burners.
The entire system is still new and not assembled.
Delivered by COIM in 2016.
New price EUR 1,250,000
Price: EUR 345.000
Clear Internal Size - 1525x1500x1120mm
Maximum Operating Temperature - 850°C
Normal Operating Temperature - 00°C
Fuel - ELECTRIC
Furnace Rating - 80KW
Maximum Payload - 2500KG
Mains Supply - 415V 3PH 50HZ
Control Voltage - 110V & 240V
Temperature Control Instrument - EUROTHERM 3504 PROGRAMMER/CONTROLLER
Bfpwcfwz
Overtemperature - EUROTHERM 2116 OVER TEMPERATURE ALARM UNIT
Recorder - EUROTHERM 5100 GRAPHICAL PAPERLESS RECORDER
Thermocouples Control: - Ø6mm ST. STL. SHEATHED TYPE ‘K’ – 1 OFF
Over...
Hardening furnace, muffle furnace, nitriding furnace, microwave muffle furnace, incineration furnace, microwave rapid incinerator, laboratory furnace
-Melting and melt decomposition z. B. for elemental analysis
-Drying, annealing and heat treatments
Ql30bmfnm
-Max. Heat: 1200 °C
-Microwave
-Menu control
-Interfaces
-Dimensions interior: 250/110/H80 mm
-Transport dimensions: 600/460/H490 mm
-Weight: 50 kg
refrigeration dryer ja
Ptzbze
voltage 230 V
weight of the machine ca. 60,5 kg
ja
max. temperature 220 Grad
Bofojqkz9u
0 500 x 415 mm
voltage 230 Volt
range L-W-H 680 x 700 x 1500 mm
weight - pallet system ~ 35,0 kg
Chamber Furnace with Gas-tight Muffle for Protective Gas Operation NABERTHERM Type N 41 / M
Muffle furnace, vacuum hardening furnace, hardening furnace
serial no. 197383 year of construction 2007
Temperature range max. 1100°C
Inner dimensions D x W x H 450 x 320 x 150 mm (height in the middle 200 mm)
Charge weight max. 35 kg
Connected load 20 kW
Motor power fan 1,1 kW
Mains connection 400 Volt, 50 Hz, 28,8 Amp.
- without temperature control (complete electric cabinet missing)
- Heating from the ...
2
Another 197 days
Insertec Melholder 1,2-2500 furnace, 1.2tn/h of solid aluminium, hold and maintain 2500 kg of molten at target temperature, with Elevator charger, charging hood, preheating tower, melting chamber, holding chamber, ladling well, extraction hoods, weighing platform on elevation charger, (2) charging baskets, one for ingots and one for returns, Morgan melt furnace transfer pot - **CURRENTLY IN USE WITH LOT 9 - UBE UB2500iV-JL DIE CASTING MACHINE**
Technical Specifications:
Elevator charger
• Nomin...
Powder furnace 6.500 x 1.900 x 2.000 mm
1 Inner dimension length 6.500 mm
2 Inner dimension width 1,900 mm
3 Inner dimension height 2.000 mm
4 Substructure 1 set of steel profiles
5 Walls 1 set of double-sided galvanised sheets 1mm, outside RAL
6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m²
7 Furnace floor receives 2 drive-in rails for trolleys
8 Temperature 220°C
9 Fans 2 pcs. 2x 7.500 = 15.000 m³/hour
10 Electric motors 2 pcs. 2x 3 kW , 1450 U/m, 3 F, 50 Hz
11 Thermal power 110 kW =...
Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace
-Machine: can be viewed under electricity and gas, including documents
-Chamber furnace: natural gas heated
-Manufacturer: Hotwork Drewsbury
-Power kW
-Max. Temp: 900° C
-Interior dimensions 4450/4200 / H1200 mm
-Allowable furnace load: 10 tons
J9j2sben
-Control: two-point control using program control
-Manufacturer: JUMO
-Thermo...
Storeroom oven Wiesheu EBO
Manufacturer : Wiesheu Year of construction : 2009
Type : EBO 68 320 IS 600 Nostalgia
each floor 1 x 60x40cm sheets
with proofing cabinet on castors Mobile
Per floor 3N-PE AC 400/50Hz approx. 5.15kW
22gp3n
Details see picture
degree 300 Grad
connected load 230 Volt
Ben79aditp
internal diameter 100 x 450 mm
output 300 Watt
depth 560 mm
length 170 mm
width 170 mm
max. temperature 750 Grad
size of opening 600x600 mm
depth of chamber 1800 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bnhyrmwwqz
14
Another 197 days
Insertec FADB 1-2500 Tilting Meltower furnace, charging and preheat chamber, melting chamber incorporating and inclined hearth, holding chamber
Technical Specifications:
• Melting rate: 1000 Kg/h
• Holding capacity: 2500 Kg
• Charge material: Aluminium ingots and returns
• Tapping temperature: 750c
Combustion system
• Natural gas
• Inlet gas pressure: 100 - 150mbar
• 415 V, 3Ph, 50 Hz
Dimensions
• Furnace: 4500 mm
• Furnace with loader: 7100 mm
• Width: 3750 mm
• Height: 6400 mm
• Weight: 30 ...
Powder baking oven 6.500 x 1.900 x 2.000 mm
1 Inner dimension length 6,500 mm
2 Inner dimension width 1,900 mm
3 Inner dimension height 2.000 mm
4 Substructure 1 set of steel profiles
5 Walls 1 set of 1mm galvanised sheets on both sides, RAL on outside
6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m²
7 Furnace floor receives 2 drive-in rails for trolleys
8 Temperature 220°C
9 Fans 2 pcs. 2x 7.500 = 15.000 m³/hour
10 Electric motors 2 pcs. 2x 3 kW , 1450 U/m, 3 F, 50 Hz
11 Thermal power ...
Drying oven, drying cabinet, electrode re-drying, electrode cabinet, preheating oven, drying system, heat treatment system
-Chamber: furnace electrically heated
-Power:40 kW
-Voltage: 380 V
-Max. Temp: 660 °C
-Control:
-Measurement recorder without function
N2jq7
-Interior dimensions: 1300 x 590/530 x 330/400 mm
-Oven dimensions: 2630/1450 / H1825 mm
-External dimensions control cabinet: 650/1190 / H2200 mm
-Weight: kg
max. temperature 550 Grad
size of opening 300 mm Ø
depth of chamber 450 mm
total power requirement 5.7 kW
weight of the machine ca. 190 kg
dimensions of the machine ca. 650Øx1300 mm
Htieuizzi
max. temperature 400 Grad
size of opening 510 x 490 mm
depth of chamber 610 mm
V7wnumc
Daylight opening 510 mm
voltage 400 Volt
total power requirement 3,75 kW
weight 146 kg
range L-W-H 810 x 740 x 1080 mm
15
Melting furnace, manufacturer: JUNKER, year of construction: 2006, capacity: 12 to., crucible-Ø: 124 cm, crucible height: 278 cm, pos. 1585: 1 melting furnace, manufacturer: JUNKER, year of construction: 2006, capacity: 12 to., crucible-Ø: 124 cm, crucible height: 278 cm, with various accessories, electrics, control system
Cipws2cru
ZWUT PSK-1 hardening furnace built by ZWUT. It is intended for various types of laboratory and industrial work.
Be73rhpt3v
Technical data :
- power consumed at T = 1350 degrees C: 4,10 kW
- installed power: 5.5 kW
- power supply voltage: 220 V, 50 Hz
- secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4
- number of phases: 1
- nominal temperature: 1350 degrees Celsius
- temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment)
- type and number of si...
Powder baking oven 4.500 x 1.900 x 2.000 mm
1 Inner dimension length 4.500 mm
2 Inner dimension width 1,900 mm
3 Inner dimension height 2.000 mm
4 Substructure 1 set of steel profiles
5 Walls 1 set of 1mm galvanised sheets on both sides, RAL on outside
6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m²
7 Furnace floor receives 2 drive-in rails for trolleys
8 Temperature 220°C
9 Fans 2 pcs. 2x 5.700 = 11.400 m³/hour
10 Electric motors 2 pcs. 2x 2,2 kW , 1450 U/m, 3 F, 50 Hz
11 Thermal powe...
Storeroom oven Wiesheu EBO
Inidvix
Manufacturer : Wiesheu Year of construction : 2007
Type : EBO 64 320 IS 600 infrared
each floor 1 x 60x40cm sheets
with proofing cabinet on castors Mobile
Per floor 3N-PE AC 400/50Hz approx. 4.4kW
It was in the garage for a long time. We plugged it in, the fuse goes out.
Must be completely sacked through
Details see picture
Drying and Burn-in Furnace TRO, Model I
For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and ...
max. temperature 400 Grad
size of opening 510 x 490 mm
depth of chamber 610 mm
Daylight opening 510 mm
voltage 400 Volt
Bpblkvghif
weight 146 kg
range L-W-H 810 x 740 x 1080 mm
total power requirement 3,75 kW
3 units as 1 item
used melting furnace induction
manufacturer: ABB / BBC
year: 1989
melting capacity: 3.000 kg per unit
power: 2.170 KVA
Vwuhatsz
control panel for liquid cooling system