Used Brazing Furnace for sale (896)

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Jfcredh

Condition: good (used), Year of construction: 2017, Functionality: fully functional, Total height: 26,000 mm, Total width: 13,000 mm, Total length: 29,000 mm, Power: 2.2 kW (2.99 HP), Overall weight: 1,800 kg, Volume flow: 25 m³/h, HL series closed water cooling tower is designed and manufactured by Weifang Jinhuaxin Electric Furnace Manufacturing Co., Ltd., is high in efficiency, low in energy consumption, tighten in structure, and wide in usage. HL series of closed cooling tower equipment is composed by host part, circulating pump system, and electrical control system. The fluid coolers host part is composed by the galvanized steel sprayhousing, condenser/cooler, fan, spray system, S-type water separator, sinks and other parts. Equivalent to a combination of heat exchangers, open cooling tower circulating pump system, pool as a whole, compact structure, beautiful appearance and generous. The working principle is that the spray cooler indirectly heat exchange,energy efficient. During work process, requires cooling medium conveyed by the circulating pump to be cooled circulating within the condenser brass, through the spray pump spray water evenly sprayed into the heat exchange in the condensersurface, while a portion of the water was evaporated away the heat, the hot and humid air from the tower and then by the fan body. Closed cooling tower run in two modes: air-cooled; air-cooled and spray. Two modes according automatically switches to the conditions required by the electronic control system to achieve energy saving. Czkonon0Sm

Year of construction: 2023, Condition: new, Functionality: fully functional, New melting furnace IGBT GW-0.25T-200kw/1s with cooling tower Bma0Iu3Aatg

Year of construction: 1986, Condition: used, Chatburn- Chantry Natural Gas Furnace With After Burner, Extraction Unit & Pneumatic Loading Bogey Uolezuvs3N Used At Temperatures upto 1,050°C. Maximum Part Height 740mm. Vertical Driven Loading Door. S/No. F6808/1. Approx Furnace Dimensions W1,800 x D2,100 x 1,000mm. Bogey Dimension W660 x L2,000mm.

Condition: new, Year of construction: 2022, Functionality: fully functional, Power: 128 kW (174.03 HP), Overall weight: 3,500 kg, Total width: 2,500 mm, Total length: 2,500 mm, Total height: 2,000 mm, Type of input current: AC, Input voltage: 400 V, Temperature: 1,200 °C, Equipment: Type Plate Available, Electric melting furnaces with tilting function 250Kg/h melting capacity 850Kg capacity 2 pieces available Gw939Zu

Year of construction: 2002, Condition: used, CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. operation modus: continuous .. heating method: gas+electric .. Heating capacity: 225 kW .. temperature max.: 1000 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 5750 mm .. width: 650 mm .. Height: 50 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 230 kW .. mains voltage: 400 V .. mains frequency: 50 Hz Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Cooling in an oxidation-free atmosphere Complete system with powder application, furnace, cooling section, cleaning Design: Continuous furnace with belt conveyor with heating and cooling section Natural gas and electric heating Heating temperature contro zones 6 Fuel gas (natural gas) approx. 5 Nm3/h Purge gas N2 approx. 30 Nm3/h Process gas H2/N2 60/40% approx. 40 Nm3/h Electrical heating Zone 1: 2 x 27.5 kW Zone 2: 2 x 27.5 kW Zone 3: 2 x 27.5 kW Zone 4: 55 kW Zone 5: 5 kW C93Gkqe

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Dn73Vl Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: ready for operation (used), Functionality: fully functional, The hardening furnace is for sale ; function is given ! Table: 1000mm x 700mm x 650mm high Dwg3Douvwl Opening : 19cm x 20cm x35cm deep Oven approx. 850mm long x 650mm deep Safety switch when opening the door, heating goes off

Year of construction: 2013, Condition: excellent (used), Functionality: unexamined, Nabertherm Furnaces (model RS 120/750/11) Year of production: 2013 Maximum operating temperature: 1100°C Utpwp9Kbdj Power: 9 kW Input voltage: 400 V, 3-phase Application: Ideal for advanced heat treatment in laboratories and industries, perfect for material testing and sintering processes. Condition: 6 units available in excellent working condition. Price is each oven.

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Bbz9Nnk92W

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Gphqzk Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 2021, Condition: like new (used), Functionality: fully functional, Additional equipment features: Afterburner, The kiln consists of a chamber with a manually opening door at its front, a heating, ventilation and control system. The frame is made of welded profiles, the outer shell is made of steel sheets with fired powder paint. Ventilation is provided by program-controlled dampers and an opening in the furnace ceiling, through which the flue gases enter the gas afterburner unit and further through the draft interrupter into the chimney. The device is equipped with a fan forced flue gas extraction. Pull-out shelf in the middle of the kiln. The furnace control is controlled by a microprocessor controller Ht200, which is able to program 30 curves in 15 steps, including controlled cooling and ethernet output. The regulation of the afterburner unit is controlled by another Ht200 controller, the safety of the gas unit operation is automatically ensured, including its shutdown in the event of a combustion air failure. The afterburning chamber with the injector burner is mounted on the furnace ceiling. The burner output is manually adjustable in the range of 2 - 20 kW. The temperature in the afterburning chamber is given by the set burner output. The burner is equipped with piezoelectric ignition with flame monitoring. The operation of the furnace is conditioned by the heating of the afterburning chamber. TECHNICAL SPECIFICATIONS OF THE KILN KKR 1.1.1-10 - operating temperature: 500°C - max temperature: 1000°C - inner useful dimensions: w. 1000, l. 1000, h. 1000 mm - approximate of outer sizes: w. 1700 + 300 mm electric control box dl. 1880 mm v. 1720 + 840 mm burn off facility - kiln frame: welded steel profiles - outer shell of the kiln: steel sheets - thermal insulation of the working space: lightweight ceramic bricks (bottom and vertical walls) fibrous insulation (ceiling) - connection into the net: 3N PE, 400/230V, 50 Hz, 4 (5) wirers Gpbykg - heating power: 36 kW - total power input: 38 kVA - heating zones: 1 - heating elements: heating spirals - location of heating elements: bottom, all vertical walls including door - type of thermocouples: 2 pieces of type „K“ - ventilation: with help of ventilation flaps located at the bottom and a fan forced flue gas extraction - atmosphere of the thermal process: oxidative - weight of charge: max 200 kg - kiln bottom: cover plate bottom thickness 4 mm, mater. refractory + s.steel support plate - furniture: pull-out shelf in the middle of the kiln - door position safety switch: automatic switch-off of the heating when the kiln is opened - overheating protection: independent limit unit with its own thermocouple TECHNICAL SPECIFICATIONS OF THE BURNING OFF FACILITY DKG 20 - max temperature: 1000°C - heating medium: propane - operating gas overpressure at the inlet: 1 bar - burner heating output adjustable: 2 - 20 kW - number of burners: 1 pc - burner type: Injector with electric ignition and flame monitoring - chamber construction: self-supporting steel - approximate of outer sizes: diam. 620 mm, h. 840 mm - thermal insulation: K 23 lightweight brick lining - connecting el. system: 1N PE / 230V, 50Hz, TN-S - control system: manual setting of burner power, temperature control on digital indicator, thermocouple type K PID controller type Ht200 Shipping not included in price but can be organised for an additional cost.

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Bfeeencs MARCELS MASCHINEN AG

Year of construction: 2009, Condition: used, CONTROLS .. PLC SIEMENS S7 300 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 1140 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 3636 mm .. width: 300 mm .. Height: 15 mm Cccqz2G Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Cooling in an oxidation-free atmosphere Use for small series or pilot plant Design: Continuous furnace with belt conveyor with heating and cooling section Fuel gas: Natural gas Forming gas: H2, N2 Inert/protective gases: N2, argon

Year of construction: 2018, Condition: used, Welding fume extraction, soldering extraction, TBH type LN 230 High-vacuum filter unit, laser extraction, laboratory extraction, extraction system, filter system Serial no. 230717 Year of construction 2018 Volume flow 320 m3/h Effective volume flow 50 to 250 m³/h Stat. Pressure 20000 Pa Motor power 1.1 kW Mains connection 230 Volt, 50 Hz - Infinitely variable suction power regulation via the control electronics on the appliance - Upper housing section with several suction connections Ø 100, 80 and 2x 50 mm - Mechanical air filter with approx. 99% separation efficiency - 1 filter 300 x 300 x 225 mm filter class F7, type MP7XGM 300 300 225 P2 G2 S2, as good as new - 1 filter 300 x 300 x 78 mm filter class H13, art. no.: 10013, as good as new - other filter configurations with activated carbon filter possible - Serial interface (25-pin Sub-D) - 8232 operating hours read off - ALSIDENT 100-55-1-5 articulated extraction arm for wall or ceiling mounting, Ø 100 mm, length approx. 1500 mm, with closing flap - Extraction hose Ø 100 mm, approx. 4 meters - mobile Space requirement extraction unit L x W x H 370 x 370 x 800 mm Weight of extraction unit 42 kg Dpn9Dv Very good condition, as good as new

Condition: excellent (used), Functionality: fully functional, Nabertherm GmbH Muffle furnaces up to 650°C, 328467, N 15 65HA Model: 328467 Type: N1565HA Condition: Used Technical data: Cccrtk0 230V 50Hz 11.7A

Year of construction: 1991, Condition: repair required (used), We are selling an Artur Nolzen shaft furnace. The furnace should be completely overhauled with regard to the electrics (status 1991) - Inner diameter: 600 mm - Inner height: 700 mm Uyda2Kybrf - Temperature: 750 °C - electr. heated - electr. connected load 24 kW

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Iswh2Z3 Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Year of construction: 2012, Condition: used, Functionality: fully functional, Operating temperature: 550 °C, Heating capacity: 168,000 W, Space requirement height: 4,137 mm, Space requirement length: 9,000 mm, Space requirement width: 4,129 mm, Used electrically heated continuous furnace system, semi-automatic continuous system with cooling system Make Nabertherm Year of construction: 2012 Internal dimensions (W x H x D): 1600 x 1200 x 3100 mm External dimensions (W x H x D): 4400 x 3800 x 9000 mm Ulz9K89Le2 Max. temperature: 550° C Voltage: 400V 3 (N) PE AC 50/60 Hz Heating capacity: 144 kW Total output: ~ 170 kVA

Year of construction: 2008, Condition: used, CONTROLS .. CNC controls SIEMENS S7 2019 General overhaul for 150`000 EUR(incl. new control S7) Usj9Qfmmoj 3 chest ovens + heated water bath Rail system above the ovens 2 x 8 fans (air cooling)

Condition: used, Year of construction: 2001, Functionality: fully functional, MAPPI Type : AU 1F 1S glass 2200 x 3800 mm Construction Year: 2001 / KW 423 400 V 50 HZ 4 - 19 mm, Left > Right Without convection (no Low-E) Without convection (no Low-E) Bldwf7Xjwla GMR Stock Place: GMR MM 1

Year of construction: 1973, Condition: good (used), rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine Cccsvw0 others: Furnace can be moved under nitrogen

Year of construction: 1999, Condition: good (used), Capacity = 10 - 25 kg / h Bei7Dgq Temperature: max. 900 ° C Power: 14 kW

Year of construction: 1994, Condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system E2Ppiku - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 1997, Condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine Ulwxbdosb2 - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.