Used Melting Furnace for sale (1,125)

Condition: used, Melting furnace with 2 working chambers, Internal dimensions per chamber: l=1640mm, w=1060mm, Fpsdpfx Agjh Rmwde Nen assignable interior height: h=400mm, Dimension: l=6000mm, w=2260mm, h=1400mm

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas Fpedpfx Ajcmxzisg Njn eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Fpjdpfxou S N Ahs Ag Nsn Zinc melting furnace ZSO 600 / 700 B

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) Fodpfjd Tx A Ejx Ag Njpn immediately available from stock

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Fsdjh Nycajpfx Ag Nepn

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 Fsdpelxnlfsfx Ag Njpn High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Fpedpfx Ajg S U Dkog Njn

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Fpedpfxed Sm Dis Ag Non Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. Fsdpfsq Nyzbex Ag Nepn 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: good (used), TAV Dual Jet TH1000 Horizontal Front Loading High Vacuum Furnace With Gas Quenching By Dual Flow Fedpfoxc Hl Nox Ag Njpn Chamber Dimension W1,000 x D1,000 x H800mm. Maximum Load 750kg. Maximum Temperature 1,300° C. Vacuum 600° C to 1,200° C, Tolerance ±6°C. Ultimate Vacuum (Conditioned Furnace) 1.0 x 10-5 mbar, Operating Vacuum 5.0 x 10-5 mbar, Partial Pressure Nitrogen/Argon 0.1 To 10 mbar, Leak Rate mbar/sec 5 x 10-2 mbar l / sec, Microns 4 microns / Hour. Rating of Heating 250kW, Connected Load 290 Kva, Rated Voltage (3 Phase at 50Hz) 380V. S/No. 087/1994. NOTE: None of the external chiller kit is included with this sale. See Lot Description for Important Information on Final Bids and Equipment Collection. With PLC, Digital Eurotherm Temperature Control/Recorder, Vemer Digital Controls, Mechanical Pump, Vacuum Pump, Diffusion Pump, Booster Pump, Holding Pump, ICS Cooler, Amazon Filter Unit, AJ Metal 1,000L Air Vessel & Front Pneumatic Loading Door. Footprint W6,000 x D7,000 x H5,000mm. BIDDING NOTE: None of the external chiller kit is included with this sale. All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Condition: excellent (used), Nabertherm Annealing Furnace Kiln Type N 200/H Temperature up to 1340°C Year of manufacture: 1991 18 kW 27.3 amperes 380 volts Control: Program Controller C8 Internal dimensions: Width: 500 mm Depth: 500 mm Height: 700 mm Fpodpfsxl R I Hjx Ag Nen Transport dimensions: Width: 800 mm Length: 1200 mm Height with stand: 1850 mm / without: 1200 mm Weight: 480 kg

Condition: used, max. temperature 1150 Grad voltage 380 Volt total power requirement 5.0 kW weight 50.0 kg from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator Fpedpexg R Ivofx Ag Nen - timer

Condition: good (used), Heraeus K 750/1 Tempering Furnace / Laboratory Furnace / Chamber Furnace For sale is a used K 750/1 tempering furnace from Heraeus. Technical Details: Manufacturer: Heraeus Model: K 750/1 Design: Tempering Furnace / Laboratory Furnace / Chamber Furnace Max. Temperature: 750 °C Heating Output: 3.6 kW Voltage: 400 V (three-phase) Areas of Application: Laboratory, Industry, Workshop, Heat Treatment, Metalworking Fjdpfjxly A Hex Ag Njpn Condition: Used, Working Buy Heraeus K750/1 tempering furnaces and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: used, Vertical furnace, make Borel Fodoxltd Rjpfx Ag Nspn Possible processes: tempering, nitriding Dimensions: diameter 800 mm height 1.800 mm max. Temperature 600ᵒC Connected load 50 kW Without lid and electrical cabinet.

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Fpedpfx Agorwfqno Nsn Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Year of construction: 2018, condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm Fpjdpfx Agodyvipo Njn depth: 1.400 mm

Year of construction: 2019, condition: new, useable dimensions (bogie hearth): depth: 4.000 mm Fpedpfx Agsd Nf Smo Njn width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Year of construction: 2018, condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C Fpjdpfedyvkyjx Ag Njn useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Year of construction: 2016, condition: new, # suitable for treatment under inert gas # with rapid cooling by fan Fsdpjcdi R Eofx Ag Nopn external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Year of construction: 2021, condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA Fjdpfx Agegyn H No Nspn internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t

Year of construction: 2021, condition: new, Pit furnace, make VEI type: VEI_SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C Fodpfx Ajg R Snhsg Nopn

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Fjdpfx Agjd Sg Hhe Njpn Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7 Fjdpfx Agog E S Inj Nepn

Year of construction: 2021, condition: new, TECHNICAL DATA Fodpjg Dgymefx Ag Nepn type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: new, Electrically heated conveyor furnace Fodpfx Agogvmg Ho Njpn