Used Drying Tower for sale (2,989)

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Gkedpfjzzk H Usx Akhjd Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water Gkjdjz Ek R Eepfx Akhod - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: new, Year of construction: 2025, Ex-display model available immediately: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 78 Model: ALM-DGO 78 Flow rate: 1.30 m³/min* Year of manufacture: 2025 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. R513a refrigerant: efficient, environmentally friendly, and long-lasting. Compact footprint for space-saving installation. Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Pressure drop: 0.14 bar Average power consumption: 0.29 kW Voltage/Frequency: 230V/50Hz Compressed air connection: 3/4" Dimensions (L x W x H): 364 x 432 x 486 mm Weight: 21 kg Convenient leasing options via our partner bank are available for new machines. Gksdjz Dwtdopfx Akhed Visit our showroom / retail store.We always stock a large selection of new and used compressors!

Condition: new, Year of construction: 2026, Display Model: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 365 with time-controlled condensate drain Type: ALM-DGO 365 Volume flow rate: 6.08 m³/min* Year of manufacture: 2026 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. Godpfjz Egtiex Akhskd Refrigerant R513a: efficient, eco-friendly, and durable. Compact footprint / Space-saving design. Technical Specifications: Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Average power consumption: 0.94 kW Voltage / Frequency: 230V / 50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 527 x 627 x 1123 mm Weight: 74 kg Financing & Showroom: Convenient leasing options via our partner bank are available for new machines. Feel free to visit our showroom / retail store. We constantly stock a wide selection of new and used compressors!

Condition: used, Year of construction: 2012, Dryer TORO-systems GFK Gedpfsz D Tw Eox Akhokd Capacity:50l

Condition: excellent (used), Year of construction: 2010, PROD. ATLASCOPCO Gkedez Izfrepfx Akhed TYPE FD285 S/N CAQ434195 YEAR 2010 POWER (kW) 2.2 CAPACITY (m3/min) 17.1 PRESSURE (bar) 14 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R410a 1.28kg EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION 2 1/2 NEW/USED USED

Condition: used, Spin dryer for washed vegetables This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side. Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vegetable spin dryer (centrifuge) Basket: Removable plastic basket Controls: Timer switch Gedpfez Ndbxjx Akhjkd Drain: Water outlet at the side Construction: Stainless steel, hinged lid

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Gksdevzwrbspfx Akhod Model ERD 65 B Connected load 0.9 kW

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine Gjdpfsv Nzq Rjx Akhekd The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ Gedpfx Aec Uthxskhekd ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, These units are manufactured from galvanized sheet and are designed to be fully screwed. This takes up very little space during shipment. Suction system is designed separately and specially for each booth so that the booth provides perfect suction. Thanks to the suction system, it is not possible for the personnel applying wet paint to be disturbed by the paint. In Elboy Wetline-KF Wet Paint Application Booths, environmental pollution is prevented by using accordion and cartridge or roll glass fiber filtration system. Gedpfsdy Dv Dex Akhskd Wet paint particles vacuumed through suction fan in the air are caught by the accordion filter on the back of the booth. Wet paint particles in the trace amount which are not caught by the accordion filter are caught by the fiber filter on the back side. The door system can be fitted to the front door entrance in various ways. UV lights can be placed in the cabinet to check the painting process.

Year of construction: 2003, condition: good (used), dryer dry-air KOCH CKT 300, 300 m³/h, year: 2003, price: 6.900 €, contact: Mr. Rainer Eckerle Godpjd E N Nzefx Akhjkd

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Godod Atipspfx Akhokd Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Gkodpfxev Si Szo Akhed Terms of delivery: ex location

Year of construction: 2013, condition: used, Drying chamber / Circulating air drying chamber / Wood drying chamber / Drying plant Mühlböck VLSM2120 Gedpfx Aowpfwyjkhskd External dimensions: Length: 7.1 meters Depth: 4.4 meters Height: 5 meters Internal dimensions: Length: 6.4 meters Depth: 3 meters Height: 4.2 meters Technical data: Year of construction: 2013 Heating capacity: 102 kW Flow temperature: 90 degrees Water quantity: 6 m3/h Electrical connected load: 4 kW Fans: 3x1.1 kW optionally with wood chip heating system

Condition: good (used), Year of construction: 2010, The device has been well maintained. Comp. air Pmax: 13 bar Refr. Pmax High: 18.7 bar Electrical connection values: 230 V / 50Hz, Kw 1 Ph Width: 460 mm Depth: 500 mm Gkedpfovmqkhjx Akhed Height: 830 mm Weight: 60 kg

Condition: new, Kaeser membrane dryer KMM 5 Gkjdpfjvkf Aaex Akhod Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: ready for operation (used), POREBA parallel lathe TCC 160 type chuck diameter 1600 Godpfxjv Dv Rhs Akhskd point height 900 max turning diameter 1800 turning diameter on the carriage 1200 between centers 10 meters documentations visual 3 glasses electricity

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,000 kg, total length: 5,500 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 3,800 mm, loading space width: 800 mm, loading space height: 600 mm, KIT 150: Designed for carpenters, joiners, musical instrument manufacturers, and woodturning workshops with a storage capacity of 1.5 to 2.5 cubic meters of wood and a stacking width of 0.80 m to 1.00 m. This energy-saving system operates on the principle of conventional drying, using an intake damper and an exhaust damper. A vacuum pump is used for rapid dehumidification. Gkjdpfxetqlp Rj Akhod

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Gkjdpfxet A Uwts Akhed Operating pressure: 4-14 bar level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: new, Year of construction: 2026, operating hours: 3 h, Exhibition unit – immediately available: Kaeser SK 23 T - 12 bar Screw Compressor incl. integrated refrigeration dryer incl. ECO-Drain condensate drain incl. SIGMA CONTROL 3 controller Year of manufacture: 2026 Operating hours: 3 h Pressure: 12 bar Rated power: 11 kW Delivery rate: 1.59 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Dimensions Length x Width x Height: 750 x 1230 x 1245 mm Weight: 387 kg Convenient leasing options via our partner bank available for new machines. Gjdpfx Ae Ad Ilkokhskd Visit our retail store. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe Gkodpfx Ao Ad Ey Eekhod - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Area per shelf: 23 x 30 cm = ± 0.06 m² Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Gkodpfx Aoygndpekhsd Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Autres : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, functionality: fully functional, The Kramer dryer with 200 liters capacity is for sale Gksdpfx Aoxhgryokhed

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Gkodpfoxgdrbjx Akhed