Used Dts for sale (139)

Condition: excellent (used), overall weight: 5,700 kg, total height: 300 mm, total length: 4,000 mm, total width: 2,000 mm, T slotted bed plate STOLLE - DT MACH-ID 9776 Make: STOLLE Type: DT Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 27mm Weight a plate approx.: 5700kg Njdpfx Aezrl Etskhswk Number of matching pieces: 2 Length: 4000mm Width: 2000mm Height: 300mm Weight: 5700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Nsdpfsw Uf Ihsx Akhswk Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger Nodpfx Aszcfytjkhjwk * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Year of construction: 2012, condition: ready for operation (used), Production facility including built-in hob and oven molds. After-sales support and knowledge transfer will be provided. CNC Vertical Machining Center (AWEA-2003-BM850-0344); Wire EDM Machine Equipment (MICRON-SP-7-42-741); 30 KVA UPS (Wire EDM); ESC 15 Screw Type Air Compressor (ZTG2100123) and Equipment; Nsdpjzi U U Esfx Akhjwk 2K522 Radial Drilling Machine; 1K625 x 1000 Lathe; Russian-Made Planer; 3MR Milling Machine for Moldmakers; EP 190*200*50 DT Distribution Compressor Panel; DK-8 Drilling Machine; Stanko Grinding Machine (Serial No. 367/185/97); Durmazlar HAP 1235 Hydraulic Press Brake (Serial No. 7010024369); 7-ton Octo-Brand Monorail Crane; 3-ton Octo-Brand Monorail Crane; 1/2-ton Monorail Crane; Angle Rebar Cutting Saw Machine; AGM 4000 INV Decoiler and AGM DSS 503 Servo Drive; CMC 2000M Decoiler and CMS S 302 Servo Drive; OMERA Hem Cutting Machine 0350i R100; 300-Ton Hydraulic Press; 200-Ton Hydraulic Press; C-Type 150-Ton Air-Clutch Eccentric Press; C-Type 120-Ton Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 60-Ton Air-Clutch Eccentric Press; 30-Ton Eccentric Press; 25-Ton Eccentric Press; 25-Ton Eccentric Press; 1/2-ton Electric Forklift; Sheet Metal Shear; Pallet Sander; Wall-Mounted Grinder; 2 Hydraulic Mold Lifting Carts; 2 Pallet Trucks; 2 Welding Machines; Mobile Welding Machines; Argon Oxygen Welding Set; PM 78 Hydraulic Pump;

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition Nodsrwq Uropfx Akhswk

Condition: used, mileage: 1,096,400 km, power: 340 kW (462.27 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 8,477 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, rear tire size: 315/70 R 22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, | DAF XF 460 Super Space Cab, EURO6 | Automatic, Intarder, electric windows | Refrigerator, air conditioning, stationary climate control | Multifunction steering wheel, cruise control | Auxiliary heating, radio/CD, DTS | Differential lock | Lane departure warning, adaptive cruise control | Tires: front axle 385/55R22.5, rear axle 315/70R22.5. Errors, input and advance sales excepted. Nwedev Tz Scopfx Akhsk

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW Nwsdpfx Akjlb Iv Nshok -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: used, Year of construction: 2013, mileage: 65,125 km, power: 62 kW (84.30 HP), first registration: 12/2013, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, tire size: 215R14C, next inspection (TÜV): 06/2026, wheelbase: 1,820 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, power assisted steering, Vehicle location: Bovenden, 1x air suspension seat, cruise control, automatic transmission, frame cover, high beam headlights, rotating beacon. Nwsdpjyatfxsfx Akhsk Wheelbase: 1820 mm Superstructure: compact sweeper, approx. 7,540 operating hours. Transport speed 50 km/h, mechanical chassis suspension, independent disc brush control, stainless steel suction tube, pressurized water circulation system. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Nwedszwk Iwopfx Akhek Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, mileage: 95,797 km, power: 200 kW (271.92 HP), first registration: 09/2022, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: automatic, total length: 5,950 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: air conditioning, all wheel drive, compressor, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typos, and prior sale: Unimog U427L municipal vehicle with 2 mowing bars + winter service spreader attachment (Vehicle 104) Registration date: 09/28/2022 95,797 km 4,440 operating hours Nwedpfezviugex Akhek Engine: 7,698 cc 200 kW / 272 hp Permissible gross vehicle weight: 14,000 kg Unladen weight: 6,820 kg Payload: 7,180 kg Overall length: 5,950 mm x overall width: 2,550 mm x overall height: 4,000 mm Euro 6 CI/SI, 130 (Euro 6 E) Permissible total weight of vehicle combination: 35,000 kg LOF-approved towed vehicle coupling TÜV inspection valid until 11/2026 Model: Unimog U427L with Mulag MFK 500 & MHU and Aebi Schmidt Stratos S30-24 4x4 all-wheel drive Wheelbase: 3,600 mm Cab: MB 2603 low entry Differential lock front and rear, axle ratio i=6.377, portal axles Coil springs with progressive characteristics, axles with 3-point steering Disc brakes front and rear ABS, switchable off-road mode Compressed air connections for auxiliary equipment Integral carrier at the front for mounting a front work platform incl. Air conditioning, multi-function steering wheel, adjustable, engine brake, radio/CD, tachograph, 2 electric windows, mirrors with heating, electric cabin floor with access option Storage compartments and storage box Center console with central controls, 2 compartments Trailer socket, 12-pin Continuous power socket in center console, 24 V / 15 A Rain sensor, rear window MB full-synchronous transfer case UG100E, 8 forward / 6 reverse gears Electro-pneumatic switching system (EPS) Exhaust system with upward-pointing tailpipe, diesel tank 200 L, daytime running lights, headlight range adjustment High-performance engine brake Speed limiter 90 km/h, cruise control 2x wheel chocks Vario Pilot Front mounting plate DIN 76060, Type B, Size 3 Swivel seat, right-hand mowing seat Additional steering stick switch on the left Front camera, rear view camera Generator 28 V / 150 A 24 V power supply switchable in the roof Mowing flap on the right Heated windshield Easy Drive hydrostatic drive Tilting cylinder Compressed air line at the rear, 2nd hydraulic circuit Hydraulic quick-release coupling at the rear, 4-way, cell 1+2, separate oil return line at the rear Hydraulics for tilting mechanism, tilting connection for trailer Hydraulic system, 2-circuit, 4-cell, fully proportional snowplow control Tachograph Gen 2, ADR Warning light for telescopic cylinder Hands-free phone system, pre-installed Headlight cleaning system Bi-Xenon, LED daytime running lights LED high beam headlights, additional on roof rail, strobe lights LED yellow, left and right with tripods Work spotlights, cab rear, top, LED Additional headlights, A-pillar adjustable Engine PTO, to the rear with flange, engine-power take-off shaft incl. front PTO, PTO speed limiter Platform subframe Trailer coupling, large, ring spring, Blozen 38.5 Steep shoulder rims 11.75x22.5, tires 385/65R22.5, front approx. 50%, rear approx. 80% Fire extinguisher 2 kg Tire inflation hose with manometer Rear-mounted hedge trimmer MHU 800, Prod. 2020, designed for left and right operation, outreach 7.3 m from the center of the vehicle, boom swivel angle 204 degrees Floating position can be switched on and off, quick-change device Boom relief control system Type AER, CAN bus, boom relief withronic Multi-function lever armrest control Equipment drive

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Telescopic handler, rotating Mast type: Telescopic Technical condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. Nedpfx Aksw Eqdwohjwk 3rd valve, 4th valve, heater, STVZO compliance, full cabin, CE certificate, PEGASUS60.30St.V, TÜV/Dekra approval, 20 km/h, axles for construction machinery with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED spotlights on the rigid boom, 7-pin socket on the upper carriage, set of radio pre-wiring with antenna and speakers, standard carrier plates for tools, mechanically sprung Grammer seat with dual joystick, right joystick with integrated FNR and electrical pre-wiring for equipment with 3 movements, wheel set with off-road tires 18R22.5XF MICHELIN, semi-automatic air conditioning, detachable windshield protection for the cabin, kit for operation during upper carriage rotation of 180 degrees, boom vibration damping, integrated rear view camera with 7" display (not compatible with 7" monitor with digital camera on the telescopic boom), telematics kit (DTS), road spotlights (front) with LED daytime running lights, cabin with front windshield made of laminated glass, pre-wiring for Woodcracker saw, three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg, pallet fork carrier plate including load hook A&M, width 1.50m including pallet forks FEM4A, forks: 150x50, length 1.2m, load capacity.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Nsdpfx Akoywk Elehewk Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Nwedpfx Akju Rc Anjhek Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Nwjdsu Rc Hyjpfx Akhjk Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck. ©farmpartner-tec GmbH: UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Nedpjyq Ar Aefx Akhewk Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreaders) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Gr.2(M) R=Gr.3 Control system Evolution Professional "EP", including electronic spreader pattern adjustment Premium spreading disc "490" (spreading width 2 - 10 m) Ball-point frame for Unimog 405.125 Support legs (4 pcs.), 3 t, crank drive in the center, including lateral supports Rotating beacon (1 piece) Warning film red-white, at the top of the container Marking "Winter Service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow measurement with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, Year of construction: 2014, We are selling a used Schmidt Keil Vario snow plough KLV 24, year of manufacture 2014. Scraper bars made of steel, 20 mm, with shock absorber strip and stabilizing spring. Adapter group for Multicar, Ausa, Leiber. Glide plates, splash guard, side deflector, plough lighting, marker lights. If you have any further questions regarding the equipment, please feel free to contact us. Storage location: 99428 Weimar. Nodpfx Aeyq Awlskhowk

Condition: used, mileage: 104,313 km, power: 130 kW (176.75 HP), first registration: 01/2009, fuel type: diesel, empty load weight: 6,690 kg, maximum load weight: 3,810 kg, overall weight: 10,500 kg, fuel: diesel, color: silver, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: other, total length: 5,880 mm, Year of construction: 2009, construction height: 2,900 mm, ENGINE DAMAGE!!! The Mercedes-Benz Atego 1018 right-hand drive Schmidt SK 500 R is a used sweeper with a Euro 4 diesel engine. The vehicle has engine damage. With an output of 130 kW (177 hp) and a displacement of 4,249 cc, this Atego is suitable for Nsdpfx Aksvmt E Ishowk demanding cleaning operations. The sweeper was first registered on January 21, 2009 and has a mileage of 104,313 km. With a permissible total weight of 10,500 kg, it is designed for professional use. The dimensions are 2,900 mm in height, 2,500 mm in width and 5,880 mm in length. A rear-view camera makes maneuvering easier. Suitable for sale to tradespeople or for export, this vehicle is a used but specialized option for companies that require a sweeper with extensive functions. Viewings are possible without registration. Sale only to tradespeople (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/1992, Year of construction: 1992, Internal vehicle number: G183 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Njdjwcuznopfx Akhowk * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 7,300 kg Gross vehicle weight: 35,000 kg Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm Nodpezc Ibmjfx Akhowk No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Nodpozcn Iyjfx Akhswk T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 3,665 km, power: 46 kW (62.54 HP), first registration: 02/1981, fuel type: diesel, overall weight: 4,200 kg, tire size: 340/80 R18, axle configuration: 4x4, wheelbase: 2,250 mm, color: orange, driver cabin: day cab, gearing type: mechanical, Equipment: additional headlights, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, short cab, rear window, switch 6, differential lock, work lights, rotating beacon, leaf spring suspension, winter service equipment. Wheelbase: 2250 mm, body: Schmidt snow blower VF1B with Mercedes-Benz separate engine 115kW, drive motor for snow blower on the loading platform DB 115kW OM 352A! EX-vehicle from the municipality of Rottach-Eggern! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nwodpfxewzbzfj Akhsk

Condition: excellent (used), Year of construction: 1995, overall weight: 5,600 kg, total height: 400 mm, total length: 4,000 mm, total width: 1,875 mm, T slotted bed plate UNION - DT Cast iron floorplate 4000 x 1900 x 400 mm Floorplate Length: 4000mm Floorplate Width: 1875mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:315mm Nwjdpszc Ihgsfx Akhek T -slot size: 36mm Weight a plate approx.: 5600kg Number of matching pieces: 2 Length: 4000mm Width: 1875mm Height: 400mm Weight: 5600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Nwodpfotr Dk Eox Akhjk Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Nsdjip Utajpfx Akhewk

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. 2 x support wheels, shield width: 5100 mm, shield height: 1200 mm. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Njdpei Rmkzjfx Akhjwk