Used Duo Grind for sale (4,516)

Condition: ready for operation (used), Year of construction: 1999, Immediately available ex location: Universal cylindrical grinding machine TOS Face, internal as well as plunge, and external cylindrical grinding between centers Model BHU 32 A Year of manufacture: 1999 Very few operating hours Internal grinding device Center height: 160 mm Grinding diameter: 320 mm Grinding length: 1500 mm Workpiece weight between centers: 250 kg Headstock speed: 1230 rpm Nwjdpfxjymcnio Abdec Table feed rate: 0.005 – 5 m/min Drive power: 14 kW Workpiece headstock with 3-jaw chuck, 200 mm diameter Spindle speed: 12 – 400 rpm in 16 steps Grinding spindle head swiveling left/right Internal grinding spindle speed up to 16,000 rpm Belt filter system Numerous accessories – see pictures Weight: 5.5 t Offered at EUR 12,500.—plus VAT ex location

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 Nsdpfxovz A Dco Abdowc The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New arrival Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Nwjdek Ufz Nspfx Abdec Grinding range 500 x 200 mm – vertical feed – micrometer feed – electronic handwheel – automatic feed – digital readout. Automatic cross feed, both continuous and intermittent, micro-fine cross adjustment – magnetic chuck with demagnetization. Hydraulic overhead dresser – leveling feet – machine has been fully checked – all functions available – runs very smoothly! Electrical circuit diagram available. Pricing: ex stock – subject to prior sale and errors.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New Arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partly overhauled in 2025 – 150 mm center height x 480 mm center distance – Workpiece headstock MK 5 with stepless speed adjustment. Grinding wheel left and right – retractable internal grinding attachment with 18,000 rpm Machine with four-axis digital readout – X-axis, Y-axis, and rotary encoder with 1 micron resolution when swiveling the universal grinding spindle head and workpiece headstock! Pneumatic air cushion lifting for effortless swiveling of the workpiece headstock and grinding spindle head Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor X-axis guideway newly hand-scraped – And the entire machine checked by a specialist Nedpfjvdumbsx Abdjwc Automatic cycle with “rapid approach, automatic feed, spark-out time, return, feed setting remains” Very lightly used machine from prototype construction! Price: On request (Domestic customers plus 19% VAT) Technical data without obligation – Subject to prior sale and errors Best regards INDUBA GmbH Mathias Becker D-78628 Rottweil

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Nwodpfx Asyl T Taebdsc Spindle speed 1,500 rpm Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Price: €2,500 plus VAT, ex-site

Condition: ready for operation (used), Year of construction: 1977, Immediately available due to business closure: Reform Hydraulic Knife Grinding Machine Type AR 40 Type 40 Year of manufacture: 1977 Nwodpfx Aoyl T S Aobdsc Grinding length: 1000 mm Grinding head: 400 mm diameter Swivelling magnet: 1000 x 150 mm Coolant system Grinding motor: 4 kW Weight: 2 tons Offered at a price of EUR 3,250—plus VAT, ex location.

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm Nwjdpfjwc A Snsx Abdec cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock Nwedpfx Abewy Ri Nedec with coolant tank *

Condition: good (used), Please refer to the images for all technical specifications. Nedpjym Aptsfx Abdjwc

Condition: good (used), Year of construction: 1990, Hydraulic Surface Grinding Machine with Automatic Vertical Feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions (L x W x H): 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical unit dimensions (L x W x H): 1200 x 800 x 2000 mm Hydraulic & electrical unit weight: 650 kg Njdpsf Um Rasfx Abdowc Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dresser • Coolant system • Separate hydraulic unit • Grinding wheel • Machine leveling elements The following works have been carried out by us: o Hydraulic cylinder for table stroke re-sealed o New filters installed in hydraulic unit o Cross feed handwheel adjustment rebuilt with new bearings Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Blohm HFS 512 Nwodpjyik Rbofx Abdsc X-2000, Y-600, Z-600 Magnet 1200 x 500 mm Power 11 kW 6500 kg

Condition: good (used), FOR SALE - Jones & Shipman Grinding Machine. General Description - Manufacturer: Jones & Shipman (United Kingdom) - Model: 1300 - Type: Universal cylindrical grinder (external / internal) - Control: Manual / hydraulic - Condition: Used Nedpfxeyhfydo Abdjwc Renowned for its robustness and precision, the Jones & Shipman 1300 is ideal for toolrooms and high-precision machining work. Technical Specifications - Centre distance: approx. 685 mm (27″) - Maximum grinding diameter: approx. 254 mm (10″) - Centre height: approx. 127 mm - Longitudinal travel: from 430 to 686 mm (depending on version) Versatility and Equipment - Grinding: Internal and external grinding capability with appropriate accessories. Wheelhead, table, and workhead can all be swivelled for high flexibility. - Grinding wheel: Max. diameter 300 mm; width 25 mm; bore 127 mm. - Spindle speed: Up to approx. 320 rpm. - Feeds: Variable (manual or hydraulic). Dimensions and Weight (indicative) - Footprint: 3.1 m × 1.5 m × 1.6 m - Weight: Between 1,800 and 2,500 kg depending on configuration. Included Accessories - Coolant tank with pump - Wheel dressing devices - Internal grinding attachment - Swivelling table and workhead

Condition: used, Year of construction: 2023, Used plant Year of manufacture: 2023 Condition: Like new, the plant was never put into production operation Equipment and technical data: Stationary clean air filter unit ECO JET DUO 6 XL ZRS 2 x 7.5 kW For extraction of wood dust and wood chips - Fans: 2 x 7.5 kW - Air volume flow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 units of 2.50 m each - BIA Category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief surfaces: 0.84 m² (bursting discs) - Base frame with discharge chute and rotary valve Dry discharge with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fans; AL-KO OPTI-JET filter cleaning; Including pressure relief surfaces and Dry discharge with C-coupling; Without filters and control system; Including pressure switches - ECO JET DUO 6 ZWR XL - 1100 MM: Spacer ring for increased expansion or unit height With 2 connection openings for intake nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For removal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long underneath the rotary valve, connection to transport pipe by customer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (indoor/outdoor device); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection type/Design: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* Number of cells: 7 Inlet/Outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (WxDxH): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 units required Filter BIA Category 'M' – electrically conductive; 2.50 m length, including support cages; 77.6 m² filter area - Intake nozzle 400 mm: with non-return damper in rectangular duct - ECO JET backflow damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Base unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding power section and controls as well as the frequency inverter are included in the base unit; the frequency inverter is installed in the control cabinet Cascade operation with FU changeover: Fan 1 runs via the frequency inverter (FU); when threshold reached, switch to mains operation; Fan 2 takes over the FU and control as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power power supply, Collective fault monitoring Display of fault messages in plain text on the display and collective fault lamp in the door Manual discharge start via display button Nwjdpfxjyk I U Aj Abdec Start filter cleaning via differential pressure Manual start of filter cleaning via button Post-cleaning supervision Brand monitoring...

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Nwodpshrkrwsfx Abdsc Weight 65 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition Nsdpohrkrpjfx Abdswc

Condition: used, grinding length 12000 mm grinding width 2800 mm workpiece height 2510 mm control Siemens 840 D workpiece weight 24000 kg column daylight 2820 mm table surface area 11990 x 2500 mm table feed 1 - 40 m/min cross rail - adjustment 2510 mm total power requirement 110 kW dimensions of the machine ca. 32,5 x 9 x 6,73 m weight of the machine ca. 151 t Equipment/Accessories: - 1 universal grinding support, 22 kW swivel range of grinding spindle +/- 110° grinding wheel dimensions Ø 700 x 130 mm vertical adjustment 1000 mm with puller - 1 peripheral grinding support, 30 kW grinding wheel dimension Ø 600 x 150 mm vertical adjustment 230 mm with puller - Coolant and filter unit Nwedpfxowa Dxwj Abdec - Various grinding wheels and flanges - Technical documentation

Condition: used, grinding length 4000 mm grinding width 1450 mm workpiece height 1250 mm control Siemens 840 D workpiece weight 11000 kg column daylight 1460 mm table surface area 4000 x 1250 mm table feed 1 - 45 m/min cross rail - adjustment 1250 mm total power requirement 40 kW dimensions of the machine ca. 12,3 x 6 x 4,8 m Equipment/Accessories: - 1 universal grinding support, 7.5 kW Swivel range grinding spindle +/- 110° Nwsdpfxswa Dx De Abdjc grinding disc dimensions Ø 500 x 60 mm Vertical adjustment 350 mm with puller - 1 peripheral grinding support, 22.5 kW Grinding wheel dimension Ø 600 x 100 mm Vertical adjustment 150 mm with puller - with 6 magnetic plates arranged on the table - seperate clamping table - various grinding wheels and flanges - Technical documentation

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nedpfxjvvkipj Abdjwc

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Nsdowhqprspfx Abdowc

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Nwjdpfx Ajwhqplsbdjc

Year of construction: 2015, condition: ready for operation (used), A Trivec wood sanding machine for producing a rough-sawn appearance by means of cross sanding is available. Working width: 400mm, max. product length: 300mm, clearance height: 120mm, working height range: 880mm-920mm, feed rate: 16m/min, sanding belt length: 2600mm, sanding belt width: 150mm. Machine dimensions X/Y/Z: approx. 1450mm/1100mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Njdpfxjynltws Abdjwc

Year of construction: 2016, condition: ready for operation (used), Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible. Nwedpfx Aoynluhobdsc

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Nedpfx Aboynltdjdjwc

Condition: excellent (used), magnetic clamping plate 1.460 x 155 mm spindle Vertikal grinding length tba mm grinding width 225 mm workpiece height tba mm Nedjyk Id Ropfx Abdowc

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Nwjdpsw Exx Aofx Abdjc