Used Dust Exhaust for sale (5,613)

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Gedpfevz Az Ijx Adbsbi Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Gjdpfx Adohpmawsbsbi Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Gbedoylb Ixspfx Adbei Terms of delivery: ex warehouse

Condition: excellent (used), Fan motor 15 kW Inlet 35 cm, outlet 35 cm Fan motor 3 kW, inlet 20 cm, outlet 20 cm Height 520 cm Width 200 cm Length 240 cm Hot air return pipe Length 570 cm, width 55 cm, outlet 80 cm 3 pipes with magnets Godpfex N Scvox Adbsbi

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Gjdpfx Aex Edmpjdbebi Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm Godpsv T Db Tofx Adbebi #8347

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW Gedpfxju Sbkas Adbsbi 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Gsdporfcpmsfx Adbebi Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Godjip Nqkjpfx Adbjbi Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to Gsdpfxjhm E S As Adbjbi to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved Gbodpfx Asl Dw U Djdbei for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. Gbjdpfjib Dadjx Adbei The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 2 h, input voltage: 380 V, type of input current: three-phase, volume flow: 1,500 m³/h, intake manifold diameter: 140 mm, overall weight: 345 kg, negative pressure: 2,100 Pa, space requirement height: 1,905 mm, space requirement length: 1,320 mm, space requirement width: 750 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified Godpfjwanf Uox Adbobi 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg

Condition: excellent (used), Year of construction: 2001, Suction unit Alko Mobil Jet Year of construction 2001, 0,75 kw H2 tested 220 Volt, Filter area 3.45 m² 1085 x 650 x 1974 mm Gbjdpfx Adsq Abzhjbsi Nominal volume flow 700 m³/h Manual cleaning 82 db(A) Spigot 100 Ø New waste garbage can

Condition: used, Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine size 1150 x 650 x 1400 mm Gbsdjxf E Hkjpfx Adboi

Condition: used, Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Gbjdpfoytx Dtex Adbei Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Gbsdpfx Aort U Nusdboi Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm Gbedpfx Adjium Ipeboi - Width: 1000 mm - Depth: 1000 mm

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Gedpevhcnzefx Adbebi Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Gjdpfoyibg Tjx Adbobi Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Connections: 3 x 140 mm // 2 x 80 mm // 1 x 120 mm Main pipe: 280 mm Gbjdswwkg Nepfx Adbji Extraction manifold with 6 connections and electric slide valve. The slide valve requires repair.

Condition: used, Square approx.: 510 x 510 mm Gbodpslf Iz Asfx Adbsi Inner tube: 230 mm

Condition: used, Connections: 145 mm Main pipe: 310 mm with 5 connections. Gbsdpfx Adolf Izmsbsi

Condition: used, suction capacity: 5,000 m³/h, filter area: 108 m², Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Device dimensions: Filtration unit: Width: 1.95 m Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Width: 1.40 m x 1.25 m Height: 1.25 m Gbodpfx Adsxx R Nksbei

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2 Gbsdpfxetq Ufvs Adbei