Used Dust Exhaust for sale (6,278)

Condition: good (used), Code: 0035 Brand: MARTIN - ITALY Ihedpfxevz A Eye Addjt Model: EURO 3 Galvanized sheet metal covered dust collector with filter sleeves for wood, paint and various Technical data: Motor power Hp 3 N° 24 filter sleeves N° 3 collection bags diameter mm 500 Suction port diameter mm 400 Electrical panel Overall dimensions of mounted dust collector mm 2300 x 1000 x 4100 h Overall dimensions for transport mm 4100 x 2300 x 1000 h

Condition: used, Year of construction: 2015, Suction nozzle diameter: 300 mm Rated air flow: 5087 m³/h Air flow monitoring: differential pressure indicator Filter area: 32 m² Iodpfx Ajx Eltgjddoht Residual dust content: less than 0.1 mg/m³ Chip sack volume: 4 x 131.5 l Filter cleaning: pneumatic Motor power: 7.5 kW Extinguishing system: yes Machine length: 3689 mm Machine width: 1590 mm Machine height: 2555 mm Weight: 967 kg

Condition: used, functionality: fully functional, Year of construction: 2018, Ammann Exhaustor Ijdpfxjx N Ia De Addsht Type 540/CW380 4500 Pa Year of manufacture: 2018

Condition: excellent (used), Fan motor 15 kW Iodpsx N Scvsfx Addoht Inlet 35 cm, outlet 35 cm Fan motor 3 kW, inlet 20 cm, outlet 20 cm Height 520 cm Width 200 cm Length 240 cm Hot air return pipe Length 570 cm, width 55 cm, outlet 80 cm 3 pipes with magnets

Condition: as good as new (ex-display), Year of construction: 2001, power: 3 kW (4.08 HP), Heavy duty rotational valve. Inside as new. New bearings, new oil in gear. 3kw- 32RPM. 8 blades. Blade tips are regulating inox strips. inlet hole 610x410 -height 700mm. Ijdpfx Asrft U Ujddoht Flange 700mm x 730mm. Overall lenght-1550mm Weight approx.- 200kg.

Condition: like new (used), Year of construction: 2021, Felder RL-140 clean air extraction unit with a maximum air volume flow of 2,500 m³/h. Technical specifications: - H3 dust tested Ihsdpfxex S I Ite Addjt - Extraction connection Ø 140 mm - Extraction possible on both right and left sides - Manual chip shaker - 10 m² filter surface area - Max. volume flow 2,500 m³/h - Minimal space requirement 1,040 x 898 x 1,940 mm (L x W x H) - From school operation

Condition: ready for operation (used), Year of construction: 2000, Felder RL-160 clean air extraction unit with a maximum volumetric flow rate of 3200 m³/h. Technical data: Ihsdpox S I D Uefx Addjt - Max. volumetric flow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2000 - From a school operation

Condition: good (used), Code: 0264 Brand: VENTILAZIONE MAPELLI Model: GM 36 PLUS - CE Standard Vacuum system with 4 collection bag complete with 36 filter bags - Motor 25 Hp Ijdpfxex Hin Do Addeht Technical data: Filtering group for four-gathering-sack-suction line with 36 filter bags Filter composed of: one upper filtering room made of painted 15/10 zinc-coated steel panels with one access door with 36 cotton bags designed for the air flow speed of 0,03 m/s, one electromechanical sleeve-shaker vibrator, one roof and stainless steel decorative profiles, one anti-bursting ATEX panel. One lower tank with tube plate, 4 supporting legs of painted zinc-coated steel, four hoppers, which channel waste material toward the gathering-sacks. One centrifugal fan with one motor Hp 25 (Kw 18,5), one air discharge tube of stainless steel with analysis outlet and one pressure differential cut-out to test the efficiency of the filtering room

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Iodpfxjwanf Us Addoht Weight: 345 kg

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Extraction diameter: 160 mm Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h 3.4 kW Ihodsrbiiwopfx Addet Automatic, motor-driven filter cleaning

Condition: excellent (used), - Total air flow rate: 70.000 m3 /h - 610 m2 (squared meters of total developed filtering surface/area) - No. 540 filtering bags (each diameter mm 120 x length mm 3000) - Average speed of the air in the filter: 1,86 m / sec - Electro-Fan type TRMV 1401 diam 1000, power KW 132 (HP 176) Iodpfx Adoh Icn Ssdoht

Condition: new, Holzprofi Maker clean air extraction system with double chip filtration. The first cleaning works via a cyclone, the second cleaning via a filter cartridge. Includes remote control. Nominal volume flow 3700 m³/h Extraction nozzle 200 mm Branch 200/100/100/100 Negative pressure V/min 2800 Pa Motor rated power 3 kW 400V Chip collection volume 240 liters Iodevrv Amjpfx Addjht Weight 170 kg Dimensions W / D / H 1200/820/2150 Filter area 4.32 m² Chip bags to be used: AB-SP300 AB-SP100

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Engine speed 2850 rpm Ihsdpfx Adjvu Atwedjt Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: new, Year of construction: 2025, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws High suction power Easy relocating due to the drive system Ihodevu Aykopfx Addst Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Speed 2850 rpm Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg

Condition: new, Year of construction: 2025, functionality: fully functional, All our extractors feature simple operation and possibility of quick bag replacement. Metal rotor ensures silent work. Affordable price in comparison to machine's capabilities. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 8 burlap bags Technical data Suction efficiency 6800 m3/h Bag capacity 4×200 Number of bags 8 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 3560×580×2200 mm Ihedpfxjvu Ryrs Addet Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor Ijdpevzqtxefx Addsht ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Ihedpsxrdhaofx Addst Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). Iodex Agpzspfx Addsht The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Ihsdpfx Adsx Hh Iiedjt Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: new, functionality: fully functional, Year of construction: 2025, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes Ihedpfjvu Artjx Addot

Condition: new, Year of construction: 2025, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Ihjdpovu A Eaefx Addjt Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER Ihsdpfsuc Uchex Addet 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system Ihedpfxjwwq Nds Addjt

Condition: new, functionality: fully functional, Year of construction: 2025, The extractor is characterized by high negative pressure and vibration-free operation. Thanks to its appropriate dimensions, the extractor can be placed under the table of the format saw. All our extractors are characterized by simple operation and quick bag change. The metal impeller of the absorber guarantees quiet, failure-free operation of the device. Very favorable price to the efficiency of the device. The extractor works perfectly with saws, format saws, planers, milling machines, etc. Device description For shavings, sawdust, dust from milling machines, planers and saws, etc. High suction power Easy movement thanks to the chassis Impeller and metal housing Ihodpfx Asvuzt Njddot Quick mounting system for the filter and bag Thanks to its compact design, it takes up little space in the workshop, while maintaining high efficiency of 2200 m / h3!!! Technical parameters SUCTION CAPACITY 2200 m³/h BAG DIAMETERS 500 mm INLET DIAMETER 125 mm MOTOR POWER 2.2 kW / 400V DIMENSIONS 1160 x 605 x 750 mm WEIGHT 50 kg

Condition: new, Year of construction: 2025, functionality: fully functional, A powerful, 2.8 kW and 5000 m3/h efficiency, sawdust extractor. Includes burlap filter bags. Machine description FM500 sawdust extractor is an efficient device of high vacuum power. Stable metal design and balanced rotor create a machine useful in any workshop. Burlap filter bags with up to 5 micron diameter filtering. Equipped with a splitter which allows up to 4 machines to be connected simultaneously. Maximum efficiency achieved when connected to 3 machines. FM500 features Ihedpovu Aqpefx Addot Metal balanced rotor Quick fixture of burlap bags Portable wheeled base Stable, metal design Bag holders High vacuum power Strong, 3-phase motor Capable of connecting up to 4 machines simultaneously Constant suction efficiency Technical data S1 motor power 2.8 kW Voltage 400V / 50Hz Motor rpm 2950 rpm Total dimensions 1525 x 560 x 2460 mm Efficiency 5000 m³/h Vacuum up to 2500Pa Air suction speed up to 31 m/s Filtration bags burlap (II filtration degree) Volume of bags 480L Diameters of connectors 200 mm / 4 x (ø 100 mm) Weight 64 kg