Used Dust Exhaust for sale (6,281)

Condition: excellent (used), Type: DST 1000 Description: For sale is a dust test chamber, type DST1000, from Testzentrum Baden GmbH. This unit was developed for conducting IP protection class “dust” tests (DIN EN 60529 / DIN 40050 Part 9). Testing possible with or without vacuum. Operation / Features: - Control panel with display and buttons - Manual regulators for individual settings - Preset test routines for standardized testing Technical Data: - Test chamber volume: approx. 1,000 liters - Internal dimensions (W × D × H): approx. 1,000 × 1,000 × 1,000 mm - Overall dimensions (W × D × H): approx. 1,300 × 1,000 × 2,000 mm - Supply voltage: 400 V / 50 Hz, 3~N/PE - Current consumption: 10 A - Total electric power: max. 2 kW - Exhaust connection: DN100 flange Ihedpfx Aoxpfx Usddet Test Performance / Protection Classes: - Dust-protected IP5X - Dust-tight IP6X Weight: approx. 350 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Iodpfx Aden Armaedjht Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Iedpfx Ajgkglxoddjht Further questions we can answer on the phone for you.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Exhaust gas cleaner, Type: Containerized Mobile Exhaust Gas Aftertreatment System Brand: MTU Rolls-Royce Ihedjx Nhxtspfx Addot Technical Specifications The system is designed to reduce NOx emissions from diesel and natural gas engines with outputs ranging from 1020 to 3300 kW. NOx reduction rates, depending on engine make and model, range between 90–98%. The exhaust gas cleaning unit is also suitable for an MTU 3.3 MW engine (mtu 20V4000 DS4000), as a lower NOx reduction rate was required in that specific project. Suitability of the containerized system for a particular engine always depends on the combined factors of exhaust mass flow, exhaust gas temperature, and the required NOx reduction rate. These systems were originally branded, designed, and sold by MTU Rolls-Royce and were manufactured according to their specifications by H+H Engineering & Service GmbH. H+H Engineering & Service GmbH has provided the seller with the option to commission the units and/or to supply a one-year warranty. In addition, our partners can also commission and service the systems. Available options can be further discussed in consultation with the seller. We purchased the units from a hyperscale data center developer, who used them to commission its backup diesel generators. The systems have been used.

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm Iodpfx Adsb A Siuodeht -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Ijdpfx Adexn Rgusdeht Warehouse No.: 1051

Condition: used, Year of construction: 2022, Used dust extractor Year of manufacture: 2022 · Galvanized sheet steel construction · Space-saving due to compact design · Supplied in ready-to-operate condition · ATEX – pressure shock resistance, FSA tested · Low energy consumption with high performance due to clean air side high-performance fan with special impeller · Energy-saving motor, efficiency class IE4 · 4 large-capacity collection containers with insert bags · Collection volume: 495 l · High safety and long service life thanks to certified filter media with test certificate · Compressed air pulse cleaning ("jet" cleaning) with time-based control for filter surface regeneration · PLC control with display for 4 slide valves EPN 24V DC, 4 machine start contacts, and 1 start for external automatic switch-on (additional slide valve control available at extra charge) · Connection cable, 5 m long, with plug · Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) · ABC powder extinguishing agent is not suitable for metal or cooking fat/oil fires · Backdraft flap, type-tested · Designed according to DIN EN 16770 · Residual dust content in exhaust air below 0.1 mg/m³ · Passed GS-HM-03 "H3" test IE5 efficiency power pack Iedex H Dahopfx Addeht Start-up slide valve control Z 16 Motor power: 11 kW with slide valve control Z 16 Nominal volumetric flow (Vnom): 6,927 m³/h at 20 m/sec Max. volumetric flow (Vmax): 8,000 m³/h Vacuum at Vnom: approx. 3,100 Pa Vacuum at Vmax: approx. 2,300 Pa Sound pressure level: < 73 dB(A) Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Availability: approx. end of January 2026 Location: NRW

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm Ijdpfsu Sbkajx Addoht engine output 5,5 kW 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 3.3 kW (4.49 HP), input frequency: 50 Hz, We are offering this used KELLER L-CUT-1-F3-B60-V dust extraction unit for OPS milling machine, year of manufacture 2008. Ihjdpfx Ajyabf Teddot

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Ihjdeivta Nopfx Addst mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Ihjdeiyyxcepfx Addot Very good condition, directly from production!!!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Iedpfx Adewp Rgmjdjht Reference: R-A0117

Condition: like new (used), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, machine/vehicle number: DED000302, type of input current: three-phase, negative pressure: 2,950 Pa, total height: 2,500 mm, total width: 1,030 mm, total length: 2,650 mm, volume flow: 5,500 m³/h, overall weight: 760 kg, input voltage: 400 V, extraction nozzle diameter: 250 mm, noise level: 73 dB, input current: 10 A, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, We are selling a Höcker Polytechnik extraction system, model "Vacumobil VT250-L", year of manufacture 2023. Only 5 operating hours! The unit was used exclusively with our edge banding machine in the showroom and is in 100% working condition. The chip collection containers have never had to be emptied, as the machine was operated only minimally. ▪ Suitable for installation directly in the working area (depending on dust type) ▪ Low residual dust content < 0.1 mg/m³ (H3) in accordance with TRGS 553 ▪ 100% utilization of thermal energy through air recirculation ▪ Large discharge volume of 3 or 4 tonnes ▪ Online filter cleaning available (at additional cost) ▪ Height less than 2.5 m ▪ PLC control, standard with automatic start and text display ▪ Drive with IE3 efficiency class ▪ Optimized filter cleaning ▪ Integrated automatic fire suppression system Iodpfxjx N Tb He Addjht ▪ Certified back-pressure flap integrated ▪ No explosion venting required for St1 dusts ▪ BG-certified filter material (separation efficiency 99.95%) ▪ Low energy consumption and high extraction performance The machine is available for immediate collection. No known defects. Warranty has expired.

Condition: new, Wet exhaust system Ihodpfx Aoci Tlroddet - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ihedpfx Aswgz T Ssddet Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, power: 3 kW (4.08 HP), input frequency: 50 Hz, tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Iodpevu Dcyofx Addjht Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Unit of measurement: piece Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Ihjdpfsxnmw Njx Addot Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: good (used), Year of construction: 2011, functionality: fully functional, TEKA Filtercube 4H dry extraction system Ihedpfx Aox Taqieddot airflow: 6000 m³/h max. static pressure: 3000 Pa motor power: 7.5 kW 400 V 50 Hz 15.5 A IP54 weight: 380 kg year of manufacture: 2011

Condition: used, Year of construction: 2014, type of input current: three-phase, input voltage: 400 V, overall weight: 700 kg, volume flow: 5,150 m³/h, suction capacity: 5,150 m³/h, noise level: 89 dB, input current: 14 A, power: 7.5 kW (10.20 HP), negative pressure: 3,690 Pa, input frequency: 50 Hz, ambient temperature (min.): 5 °C, protection type (IP code): IP6K0, ambient temperature (max.): 40 °C, We are offering this used ESTA NA-K 6000 B extraction system, year of manufacture 2014. Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power: 7.5 kW Current: 14.4 A Sound pressure level: 89 dB(A) Pre-filter: 32 µm Protection class: IP 6X Maximum airflow: 5,150 m³/h Maximum negative pressure: 3,690 Pa Water capacity: 290 l Weight: 700 kg Year of manufacture: 2014 Operating temperature range: +5 to +40 °C If you have any questions or require further information, please feel free to send us a message or call us. This unit was used for the extraction of grinding dust/mist in connection with grinding processes (including grinding robots/grinding cells) and is ideal for reliable wet dust collection of particles. ✅ ATEX/DEKRA certification present (visible sticker) ✅ Heavy-duty industrial design, suitable for continuous operation ✅ Excellent addition/bundle for grinding cells (Krugmann/robotic systems) Technical data (available): Manufacturer: ESTA Apparatebau GmbH & Co. KG Model: NA-K 6000B Year of manufacture: 2014 Power: 7.5 kW Connection: 3~ 400 V / 50 Hz Current consumption: approx. 14.4 A Weight: approx. 700 kg Ihedox Stb Espfx Addjt Inventory No.: 03375 Scope of delivery / Collection: Delivery as shown in the photos. Collection from site. Dismantling/loading by purchaser or as per agreement.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) Iodpolxyhfofx Addoht each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Iodpfx Aedrtaljddsht Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Mobile extraction unit Spänex Mobil - 380 Volt - 0.75 kW - 120 mm Ø suction connection Ihsdpfx Adjx E Dc Tjdet - 1440 m³/h air flow rate

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h Iedpfjx Enr Ejx Addjht - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Ihedpjx U Amijfx Addjt Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: excellent (used), Year of construction: 2016, Clean Air Extraction Unit RL 250 Year: 2016, low operating hours 5.5 kW motor Pneumatic filter cleaning 250 mm duct connection Filter area: 50 square meters Chip container volume: 2 x 250 liters Ihodpfxox Ruhwe Addst Dimensions: 2640 x 1200 x 2260 mm Weight: 785 kg