Used Dust Extraction System for sale (29,685)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, type of input current: three-phase, filter area: 28 m², negative pressure: 1,800 Pa, total height: 2,930 mm, total width: 1,250 mm, total length: 2,340 mm, nominal flow rate: 4,200 m³/h, input voltage: 400 V, suction capacity: 6,160 m³/h, power: 7.5 kW (10.20 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, pressing: 1,800 Pa, *Exhibition unit *Only in operation for 5 hours *Extraction unit in mint condition *New filter elements *Atex fan *Immediately available *Other units available upon request Iisdpfjwgpl Aex Ah Uek *Plug-in ready

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Iedpfx Asl Dw U Doh Uoik Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: V-006-11, volume flow: 3,300 m³/h, Extraction filter device for filtering dust and small sawdust with a large filter surface and large collection bags. Used on CNC as a drain for wood dust and sawdust. Including motor. Iiodpfx Ahowgb H Es Ujk

Condition: used, Mobile Dust Extraction Fritz Moeller Ijdpfjddxl Ejx Ah Uoik

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Isdpfxewwq Nds Ah Usik Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Iedpfx Aow Hw Dgjh Ujik

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg Iedpfxoib Dado Ah Usik

Condition: new, Year of construction: 2025, The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle! Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system. Iedsudaqyjpfx Ah Ujik A safety lock prevents larger elements from entering the fan. Built-in, soundproof, RETURN OF WARM AIR Reinforced construction with special anti-corrosion coating Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors have an additional pair of doors for easier bag replacement Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season A strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors A failure-free filter shaking system with the possibility of working in an automatic cycle A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system Control cabinet for switching the device on/off polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 18.5 kW (25 HP) Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 920 mm Number of filters 117 pieces Inlet diameter 400 mm Outlet dimensions 595 x 345 mm x2 Efficiency 15000 m3/h Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow) Weight 980 kg

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Iodpfxonyhvqs Ah Ujik Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 Isdsuc Uchspfx Ah Usik DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Ijdpfxetixlbj Ah Uoik Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of the treatment. A certified control cabinet allows the correctness of operation to be monitored at all times. The vacuum fan, 7.5 kW / 8900 m3/h, operates on the turbine principle, and the soundproofed design of the fan enables the noise emitted during operation to be significantly reduced. Very high tightness of the entire intake system, guaranteeing the best air quality inside the plant and, during the heating period, no loss of heat. Version with one exhaust duct and one BIG-BAG! Strengths of the SCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust collector The new TC series of extraction units has a full top casing to absorb noise and vibrations generated during operation and the possibility of warm air return Very high tightness of the entire extraction system, guaranteeing the best indoor air quality and no heat loss during the heating period Powerful and quiet radial fan guaranteeing you a high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the SCVs Trouble-free filter shaking system with automatic operation Iedpsup Df Tofx Ah Usik Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment of the system, at the same time equipped with a mobile trolley system Control cabinet for switching the unit on/off The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA should be used It is not allowed to use this extractor in explosive atmosphere The extraction is not suitable for handling wet material (e.g. wet sawdust) The bottom beam needs to be removed before operating the extraction in order to have free access to the chip boxes Reduction - hot air return extra charge Technical specifications Supply voltage 400 V Power 7.5 kW Motor speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 45 pieces Inlet diameter 350 mm Efficiency 8900 m3/h Dimensions 2400 x 1100 x 3600 mm Net weight 540 kg

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889 Iisdpfxouy N S Uo Ah Usk

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Iijdsmrm Raepfx Ah Uok Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2 Isdopgnfdopfx Ah Usik

Condition: excellent (used), Year of construction: 2007, filter area: 28 m², volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 7.5 Kw fan Iedpfx Ajrp D Najh Ueik Capacity 6 000 m3/h Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Technical documentation included.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Ijdpfx Aen Nw Ntoh Usik Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Filtration area 24 m2 Ijdpfx Asg Rhfbjh Ujik Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. Iedpfxshm E S Ae Ah Usik The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Iisdjtq Ufvspfx Ah Uok Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Iedpfx Aotpwrqsh Ueik Vacuum of 2500 Pa

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping. Iijdperhidmefx Ah Uok

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Iiodpfx Ahshqd Tvo Uek Filtration surface 128 m2

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Iijdpfjiu Hq Djx Ah Uok Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Iodpfxsmxklhj Ah Usik Hose connection - ~45 mm x 2