Used Ventilation for sale (1,502)

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame: made of galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg Gusdpfefccuzex Anljc

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 8,500 kg, permissible axle load (axle 3): 8,500 kg, first registration: 06/2002, suspension: other, tire size: 245 R17.5, wheelbase: 5,250 mm, color: red, Year of construction: 2002, Pezzaioli 2-deck livestock trailer - Ventilation - Lifting roof - Lift axle BPW Year of manufacture: 2002 Registration number: WF-PZ-76 2-deck livestock trailer Ventilation 7.5 m Lifting roof Lifting floors = Further information = Axle configuration Tire size: 245 R17.5 Gujdpfxszdc Ecs Anlec Axle brand: BPW Front axle: Dual tires; Max. axle load: 10,000 kg; Tire tread depth (left, inside): 30%; Tire tread depth (left, outside): 30%; Tire tread depth (right, inside): 30%; Tire tread depth (right, outside): 30%; Suspension: Air suspension Rear axle 1: Dual tires; Lift axle; Max. axle load: 8,500 kg; Tire tread depth (left, inside): 30%; Tire tread depth (left, outside): 30%; Tire tread depth (right, inside): 30%; Tire tread depth (right, outside): 30%; Suspension: Parabolic spring suspension Rear axle 2: Dual tires; Max. axle load: 8,500 kg; Tire tread depth (left, inside): 30%; Tire tread depth (left, outside): 30%; Tire tread depth (right, inside): 30%; Tire tread depth (right, outside): 30%; Suspension: Air suspension Weights Unladen weight: 8,390 kg Payload: 18,610 kg GVWR: 27,000 kg Condition Technical condition: good Optical condition: good Identification License plate: WF-PZ-76

Condition: excellent (used), -Dimensions: 800x1470x1900 mm -Shelf spacing: 91 mm -20 levels Gedpfxswxxins Anleuc -Trolley 400x800 -Capacity: 100 baguettes of 250 g per batch -Power: 36 kW -Voltage: 390 V-50 Hz -Weight: 460 kg

Condition: excellent (used), - Condition: Used - Dimensions: 800x1470x1900 mm - 20 levels - Trolley: 400x800 mm Gsdpfx Anewxxi Usljuc - Model: TOPAZE - Capacity: 100 baguettes of 250 g - Temperature: 210°C - Weight: 450 kg

Condition: excellent (used), -Dimensions: 800x1470x1900 mm Guedjwxxibjpfx Anlsc -20 levels -Trolley: 400x800 mm -Serial number: 1003PAV933 -Model: TOPAZE.T80 Lroyowxxibs Tdxuger -Capacity: 100 baguettes of 250g -Year: 2010 -Temperature: 210°C -Voltage: 220V -Power: 33.5 kW -Weight: 460 kg -Refurbished equipment: the equipment is prepared upon order; collection and return times are agreed at that moment (please request the price after refurbishment).

Condition: excellent (used), -Dimensions: 935x1200x1900 mm -Trolley dimensions: 400x800 or 400x600 mm -Batinox1648 -Serial number: BA/33906 -Capacity: 80 baguettes -Double insulating glazing, low-emissivity, ventilated, easy to clean Guodpfx Aewxxkfonljc -Stainless steel baking chamber -Voltage: 230V -Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please inquire about the price after refurbishment)

Condition: excellent (used), - Trolley dimensions: 400x800 or 400x600 mm - Capacity: 40 baguettes - Batinox 1648 ERGO2 - Serial number: BA31595 Guedpowxxhwofx Anlec - Voltage: 400 V + N / 50 Hz / 60A -Double insulated glazing, low-emissivity, ventilated, easy to clean -Door with two-point locking system - 6 mm thick stainless steel hinges - Baking chamber made of stainless steel - 50 mm thick insulation, panels of double-density rockwool - Refurbished equipment: The equipment is prepared upon order; delivery and return times are agreed upon at that moment (please request the price after refurbishment).

Condition: used, -Dimensions: 800x1470x1900 mm -Shelf spacing: 91 mm -20 levels -Trolley 400x800 -Capacity: 100 baguettes of 250 g per batch -Power: 36 kW Gedpfx Ajwxxihsnljuc -Voltage: 390 V -Weight: 460 kg -Refurbished equipment: the equipment is prepared to order, collection and return times are agreed at that moment (please request the price after refurbishment)

Condition: used, -Dimensions: 78x1195x2142mm -18 levels -Capacity: 80 baguettes Guedpfowxxh Rsx Anlec -Trolley: 400x800 or 400x800 -Voltage: 380V -Weight: 500kg

Condition: used, -Dimensions: 935x1200x1900 mm -Trolley dimensions: 400x800 or 400x600 mm -Serial number: BA31056 -Model: 1648/ERGO -Capacity: 80 baguettes -Double insulated glazing, low-emissivity, ventilated, easily cleanable -Baking chamber in stainless steel -Voltage: 400V Gujdpfxjwxxklj Anljc -Refurbished equipment: the equipment is prepared upon order; collection and return times are agreed at that moment (please request the price after refurbishment)

Condition: used, - Serial No.: 15591 - Model: Bakelux - 10 levels Gujdpfx Aey H Ivtsnlec - Tray spacing: 90 mm - Tray size: 600x400 mm - Baking surface: 2.40 m² - Year: 09/2000 - Power: 16.4 kW - Voltage: 400 V

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Gujdpfxjvlz Aro Anlsc Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2004, Safety cabinet, hazardous materials cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet, hazardous materials cabinet, safety cabinet Gjdpfx Ajy S R U Ajnlouc -Manufacturer: asecos, hazardous materials cabinet, safety cabinet with ventilation attachment -Design: With 3 shelves, drip tray, transport base -Technical data: see photos -Dimensions: WDH 1200/640/2140 mm -Transport weight: 278 kg

Condition: used, functionality: unexamined, machine/vehicle number: 9565, Used TSI VelociCalc Multi-Function Ventilation Meter 9565, in case Manufacturer: TSI Gedpfjwwi D Tsx Anleuc Model: 9565

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h Gusdpfx Aeyq Nl Nenloc - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. Gsdpfxjxxalns Anljuc The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: excellent (used), For sale: Professional WNT tool holder SK40 Ø12x80 capable of operation up to 25,000 rpm (balanced to G2.5). The holder comes complete with a ventilated drill – ideal for machining with internal cooling. Excellent condition, the tool has been tested and is ready for use. Top-class equipment, designed for precision machining on CNC centers. Godpow Rrw Usfx Anleuc

Condition: used, Year of construction: 2006, Zum Verkauf steht ein größerer Posten pneumatischer Prozessventile mit Antrieb. Gesamtmenge: 96 Stück – ca. 65 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – restliche Einheiten: pneumatische Antriebe / Ersatzteile Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Chemische Industrie – Lebensmittel- und Getränkeindustrie – Wasser- und Prozesstechnik – Wartung, Ersatzteilversorgung, Wiederverkauf Neupreis vergleichbarer Einheiten: ca. 120–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 4.200 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: large lot of pneumatic process valves with actuators Total quantity: 96 units – approx. 65 complete units with stainless steel ball valves – remaining units: actuators / spare parts Gjdpfey Nfzxsx Anleuc The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – chemical industry – food & beverage processing – water treatment – maintenance and spare parts supply – resellers Estimated new price of comparable units: approx. 120–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 4,200 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: ready for operation (used), * Brand: Radial Gedpfsywm H Ejx Anlouc * Model: ventilator * Driving: 19 kW

Condition: ready for operation (used), * Model: ventilator Gujdpoywmdwjfx Anljc * Driving: 22 kW

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Gusdpfex N Icxjx Anlec Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Guodpfx Anox Tuyxjloc

Condition: used, Year of construction: 2006, Zum Verkauf steht ein Posten pneumatischer Ventile und Antriebe des Herstellers Festo. Gesamtmenge: 42 Stück – 28 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – 14 Einheiten: pneumatische Antriebe / Komponenten Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Lebensmittel- und Getränkeindustrie – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Neupreis vergleichbarer Festo Einheiten: ca. 150–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 2.900 € VB Standort: Slowakei (EU) Versand europaweit möglich Gujdpfx Ajyxqlujnlsc For sale: lot of pneumatic valves and actuators by Festo Total quantity: 42 units – 28 complete units with stainless steel ball valves – 14 units: pneumatic actuators / spare components The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – industrial automation – food & beverage processing – chemical industry – water treatment and process systems – maintenance and spare parts supply Estimated new price of comparable Festo units: approx. 150–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 2,900 € negotiable Location: Slovakia (EU) Worldwide shipping possible

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Type: CLCE 1810 Year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Godpsk Abw Tsfx Anleuc Type: QU 200 L4C-40 H Electric power: 30 kW

Year of construction: 1983, condition: good (used), Ventilator Piller RC VII Motor 11kW DIETZ 5220 1/min Guedpfx Ajghrx Nsnlsc