Used Dust Filter System for sale (44,180)

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Hedpfx Alert H Izs Asu Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Hsdpfx Aezuz Icsl Asu Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, Exhaust Air Dedusting System Hsdsxq Epvepfx Al Aou Height: 4300 mm Width: 3000 mm Depth: 1300 mm Base frame dimensions: approx. 1750 mm Upper part dimensions from flange to motor cover: approx. 2450 mm Exhaust air box on top of motor cover: approx. 400 mm The exhaust air and dedusting system is equipped with a new motor, which we newly installed in September 2025. The system has already been dismantled and is ready for pickup.

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Financing through our bank is also possible. Hedpfx Ajx Ex Nzol Asu komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction blower, fan, extraction, chip blower Hodpfx Asf D Azhjl Aou -Handover: in its current state as inspected, without filter element -Manufacturer: Höcker -Motor power: 1.5 kW -Speed: 2870 rpm -Inlet connection: Ø 147 mm -Outlet connection: Ø 515 mm -Base frame: on casters -Dimensions: 610/1100/H1405 mm -Weight: 68 kg

Condition: used, functionality: fully functional, For sale are 2 industrial multiplex refrigeration units in robust design, equipped with multiple Bitzer piston compressors. The units originate from an operational site and have been professionally dismantled. Ideal for continued use, retrofit projects or export. Scope of delivery: - Complete multiplex system - Fitted Bitzer compressors Hjdpfx Asyxvqcjl Aju - Control cabinet/controller Condition: - Used - Dismantled from a working installation - Age-related signs of wear - Sold without warranty

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels Hedpfjh Szarex Al Aou -Dimensions: 950/480/H1860 mm -Weight: 40 kg

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery Hjdeyc H N Njpfx Al Aeu • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) Hedpfx Aljfg Iphj Aeu The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.

Condition: good (used), Year of construction: 1986, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors -Dimensions: 940/540/H1510 mm -Weight: 74kg Hsdpfx Alefxx Nnj Aou

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. Hodpfxjggx E Dj Al Aou They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: good (used), Clean air extraction system Used machine, in good condition Hedpfsrb D Nex Al Aju Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: Hsdpfxjzrw Dbs Al Asu - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: Hjdef D S Trjpfx Al Asu - Motor power: 11 KW - NEW: Frequency inverter for main motor - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D Hodot Tyqmepfx Al Aju The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Hedpfoxri T Ujx Al Asu Year of manufacture: 2011 Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Hedpfx Alewypqle Aou Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Adept Robot System, Industrial Robot, Used Machine Dimensions: Length: 1250 mm Width: 520 mm Height: 1860 mm Manufacturer: Adept Robot System Model: Cobra 800 Type: SCARA (4-axis) Maximum reach: 800 mm Hsdpfx Aewm Hnbjl Asu Rated payload: 2 kg Maximum payload: 5.5 kg Repeatability (XY): ±0.017 mm Repeatability (Z): ±0.003 mm Repeatability (Theta): ±0.019° Protection class: IP65 Year of manufacture: 2003 (according to label) Special features: Outstanding precision and speed Integrated servo amplifier and controller (space-saving design) Conveyor tracking and vision system integration capability Easy calibration with absolute encoder Optional IP65 protection (dust and waterproof design) Summary: The Adept Cobra 800 is a high-performance, compact SCARA robot designed for fast, precise, and flexible industrial automation tasks. With a maximum reach of 800 mm, payload capacity of 2–5.5 kg, and excellent repeatability, it is an ideal solution for assembly and material handling operations.

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Hodjy Eg Dyepfx Al Aeu

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Hsdpfxezmy Aij Al Aeu

Condition: excellent (used), Year of construction: 2020, 2020 DMG Mori Robo2Go Robot Automation System Hjdpfx Asz Dg R Sol Asu Working Range Ø25-Ø125mm, Length 50-250mm. With Fanuc Robot M20iA 6 Axes, Payload 20 kg (Standard Base Model; Variants Range From 10-35kg, Reach 1,811mm. Repeatability ±0.08mm. Robot Mass 250kg. S/No. R2G-171201.

Condition: used, 1 x DCE Dust Extractor Unit Hodpfjz Ap Srox Al Aeu

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Hodpfoyn Rmisx Al Asu Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Hedpfxoxb Dcve Al Asu Please submit a purchase price offer for the machine.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: Hjdpeyc H R Tefx Al Asu • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)