Used Ecomax 14 for sale (9,692)

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth Bedpfxev R Tvhe Adhjlp -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos -Quantity: 70x sprocket available -Price: per piece -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece

Condition: excellent (used), Hose reel, hose dispenser, wall-mounted reel, hose reel, automatic hose reel -Manufacturer: Planeta, hose reel -Type: L-809 Bedox E Sxvopfx Adhslp -Hose length: 14 m -Dimensions: 780/270/H550 mm -Weight: 20 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, - Battery: 24 V - Nominal load capacity: 1400 kg - Fork length: 1200 mm Bljdpfx Ajwff Ansdhsp - Service: Overhauled, battery replaced in March 2025. - In good condition

Condition: used, functionality: fully functional, GRAZIANO SAG 14 LATHE 1500 X 180 CHUCK BORE 505 Bjdpsz Ektasfx Adhslp SPINDLE BORE 51 SPINDLE SPEED 12 DISPLAYED

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Stored in a covered, enclosed warehouse. Bsdoz Ryfwopfx Adholp

Condition: good (used), Servo motor, electric motor, direct current motor, direct current generator, electric motor with direct current generator -Spare part: comes from a Scharmann boring mill -Manufacturer: Kessler, electric motor with direct current generators -Three-phase motor type: DM21-16 32 kW 2880 rpm -DC Gen. Type: G 50/42/1 6/18 kW -DC Gen. Type: G 44/14/2 8.2 kW Bodjgiy T Eopfx Adhslp -Technical data: see photos nameplates -Dimensions: 1750/580/H540 mm -Weight: 886 kg

Condition: good (used), machine/vehicle number: 13131, Year of construction: 2013, operating hours: 14,340 h, load capacity: 1,400 kg, lifting height: 3,400 mm, free lift: 1,570 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,130 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: 18x7-8, rear tire size: 15x4,5-8, overall weight: 3,097 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Still Serial Number: 516209D00196 Bodpjyld Rpjfx Adhelp Battery Details: 24V 5PzS 625Ah (aus 2015)

Condition: new, Pulper for waste paper Blsdpfxjxdlc As Adhsp * Volume: 12 - 14 m3 * Capacity: 100 T / 24 hrs * Density: 4.0 / 5.0 % * Power: 132 kW / 750 rpm

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm Bjdpsyrhtzofx Adholp 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2026, condition: new, functionality: fully functional, New machine 2-year warranty Available in 4 different versions, knife heads are also replaceable Advantages: + Unbeatable price-performance ratio + Already standard: mobile machine, ideal for quick floor sweeping + Dividing blades made of stainless steel + Quickly replaceable, coated knife head + Up to 4 different knife heads can be used with one machine + Extremely wide weight range (16 g - 400 g for round dividing possible!) + Uniform division of the dough, excellent round dividing of the dough pieces + Dividing function can be deactivated by pressing a button + Ergonomic knife cleaning position (head can be swiveled forward by 90 degrees) + Dividing function, pressing time, and dividing duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the dividing chamber height + Side holder for dividing disks, readily accessible STANDARD accessories: 3 dividing disks included General technical data: Power: 1.3 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (W x D x H) Bodpfx Adoivdncjhslp Net weight: 380 kg Size 4-14: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on the dough) Dough input: 1,820 - 5,600 grams (depending on the dough) Optionally available: - Additional dividing disks Surcharge: 115 EUR net / piece - Additional knife head (including 3 dividing disks) Surcharge 1,840 EUR net / set

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio + already included as standard: mobile machine, ideal for quick dough processing + cutting blade made of stainless steel + coated cutting head + uniform division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the processing chamber height + side holder for the processing plate, readily accessible STANDARD equipment: + 3 processing plates included Bsdpfx Adeivdnnjhslp General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - additional processing plates Surcharge: €115.00 net / piece

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. Bjdpfx Adewiq Drshelp These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Bjdpfx Aewhi Sredholp Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Mast type: Triplex construction Lifting height: 6200 mm Lifting capacity: 1400 kg Bjdpfx Ajvkcw Isdhslp Fork length: 1150 mm Loader

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 2,029 h, load capacity: 1,400 kg, lifting height: 3,910 mm, fuel type: electric, mast type: simplex, construction height: 2,380 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Mast type: Standard Technical condition: normal Front tyres type: Solid rubber (bandage) Front tyres condition: 60 - 80% Rear tyres type: Solid rubber (bandage) Rear tyres condition: 40 - 60% Bodpfx Aoukrh Sedhelp Battery voltage: 24V Battery capacity: 250Ah Battery year: 2010 Description: The machine will be partially repainted if required, workshop-serviced and UVV-inspected. Prices for this are available on request. Damage: Mast and fork carriage slightly worn, machine scratched, dented and rusted all around.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg Bodpfjzvbdaex Adhelp Weights Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Identification Registration number: OJ-16-YP

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Bledjzabf Topfx Adhep Dual manual/automatic mode Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device Bsdpfxszhtuho Adholp -Drive motor: -Load capacity: 14,000 kg -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg

Condition: like new (used), Year of construction: 2017, operating hours: 7,429 h, load capacity: 1,400 kg, lifting height: 9,250 mm, fuel type: electric, mast type: triplex, construction height: 3,780 mm, Manufacturer + model: LINDE R 14 HD Mast: 3F9250 ID: 25022.2760 Category: Used Mast: 3F9250 Bljdpfx Ajzuubpsdhep Lowered height: 3780 mm Lifting height: 9250 mm Capacity: 1400 kg Year: 2007 (Assuming "27" is a typo for 2007) Hours: 7429 hours Battery capacity: 48 V / 775 Ah

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump, Full steel floor Equipment: - Charger - 6x Lashing points - Electric pump Net: €6,008.40 / Gross: €7,150.00 Article number: UDK230301811.01 Technical data: • Brand: Unsinn • Model: UDK 3017-30-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 306 x 175 x 35 cm • External dimensions (L x W x H): 450 x 191 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,000 kg • Unladen weight: 790 kg • Payload: 2,210 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side panels anodized, double-walled • All side panels can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Option to attach at all 4 corners for tarpaulin frames, grid extensions, side panel extensions or front wall extensions • Stable toggle lever locks • Full steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction welded and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All transverse and longitudinal members rest on the ground • 6 folding lashing points, mounted recessed in the floor frame profile (600DaN/kg) • 6 lashing points under the loading area • U-profile on the rear, for easier attachment of the ramps • Ramp compartment prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency hand pump, for manual tilting in case of empty battery • Detachable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safely parking the loaded trailer, load capacity 500kg • Premium maneuvering handle with ratchet strap reel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT. - Vehicle registration certificate can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Bodjzy A E Hepfx Adhslp Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, functionality: fully functional, overall weight: 835 kg, empty load weight: 835 kg, operation weight: 835 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium size class impress with their high impact energy, robust construction, and reliable performance for daily construction site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they provide the optimum combination of impact energy, efficiency, and durability. The noise- and vibration-damped design ensures excellent operator comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact energy with a compact design - Outstanding spare parts availability - Various mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box Bedpjy St Huofx Adhjlp - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow rate: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Machine damping - Suitable for carriers: 10 – 14 t Advantages of STEELITE hydraulic hammers - High breaking capacity with smooth running characteristics - Efficient power transmission for economical operation - Long service life and low maintenance costs - Robust design for maximum operational reliability - Optimal ratio of performance, weight, and durability

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 10,300 h, load capacity: 7,000 kg, lifting height: 4,500 mm, free lift: 1,400 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, gearing type: hydrostat, fork carriage width: 13,600 mm, fork length: 1,400 mm, fork width: 250 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 355X65-15, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 20,550 kg, empty load weight: 13,550 kg, total height: 2,750 mm, total length: 5,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, retractable fork, sideshift, 🏗️ BAUMANN GX 70.50 / 14-11.5 45 | DIESEL | DUPLEX 4500 MM | FREE LIFT | WIDE HYDRAULIC FORK POSITIONER | CABIN | READY FOR WORK ✅ FULLY SERVICED ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a sideloader that will start generating value from day one instead of creating maintenance costs, this machine is the right choice. We offer a reliable and fully prepared BAUMANN GX 70.50 / 14-11.5 45 sideloader forklift. The machine has undergone a complete technical inspection, comprehensive servicing, and detailed operational testing. It is ready for immediate deployment in production facilities, warehouses, logistics centers, steel yards, and timber operations. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Brand new super elastic tires ✅ Excellent technical and visual condition ✅ Ready for operation with no additional investment required ✅ Live online video inspection available ✅ Direct delivery to the customer's location available 🔧 TECHNICAL SPECIFICATIONS Manufacturer: BAUMANN Model: GX 70.50 / 14-11.5 45 Year of Manufacture: 2009 🏋️ Load Capacity: 7,000 kg 📌 Reduced Capacity with Hydraulic Fork Positioner: 5,000 kg ⛽ Engine: Diesel 🕒 Operating Hours: 10,300 h ⬆️ Mast Type: Duplex 📏 Lift Height: 4,500 mm ↔️ Fork Positioner: Wide hydraulic fork positioner, 14,000 mm opening 🔩 Fork Length: 1,200 mm / 1,400 mm 🚜 Cabin: Fully enclosed and heated ⚖️ Service Weight: 13,550 kg 📐 DIMENSIONS • Overall Height: 2,750 mm • Overall Length: 5,100 mm • Overall Width: 2,300 mm • Lowered Mast Height: 3,200 mm 🛞 TIRES Front: 355 x 65 - 15 Rear: 355 x 65 - 15 ✅ Tire Condition: 100% New ⚙️ EQUIPMENT ✅ Wide hydraulic fork positioner ✅ Free lift ✅ Fully enclosed cabin ✅ Heating system ✅ Working lights 🏭 IDEAL FOR 🌲 Timber industry 🏗️ Steel mills and steel service centers 🔩 Structural steel manufacturers 📦 Handling pipes, profiles, beams, and long loads 🏢 Indoor and outdoor applications 🤝 WHY FT LOGISTICS When purchasing from FT LOGISTICS, you are buying from a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. 🔍 Every machine undergoes technical inspection, servicing, and operational testing before delivery. 🌍 We maintain an inventory of more than 100 machines available for immediate purchase and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full pre-sale servicing ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing solutions ✅ Transportation arrangements ✅ Export handling and customs documentation ✅ After-sales support Bodpj Aa Iw Sefx Adhjlp 🏆 Hundreds of customers across Europe trust our equipment and return to us for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online machine presentation, provide additional photos and videos, and prepare a customized transport quotation for your company. FT LOGISTICS 🚜 Machines Ready for Work.

Condition: used, Hastamat CP 4.14/14 German 14-Head Combination Weigher / Multihead Dosing System (2007), Used Equipment Technical Data: Manufacturer: Hastamat Verpackungstechnik GmbH (Made in Germany) Type: CP 4.14/14 Machine No.: 997110550 Line No.: H5275 Year of Manufacture: 2007 Number of Heads: 14-head combination weighing system Power Supply: 230/400 V (3 × 400 V, N, PE) / 50 Hz Blodpoz Rzq Usfx Adhep Power Requirement: 3.0 kW Equipment and Features: Clean stainless steel (INOX) frame and product-contact surfaces Festo valve terminal and pneumatic system Omron VS mini J7 variable-frequency drive (VFD) control Siemens SITOP industrial power supply and Siemens LOGO! / Pilz safety PLC modules High-quality Mink-Bürsten guide brushes Can be connected to vertical or horizontal packaging machines (VFFS/HFFS) Overall Dimensions: Width: 1490 mm Depth: 1490 mm Height: 1730 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,015 h, load capacity: 1,400 kg, lifting height: 8,290 mm, free lift: 2,750 mm, fuel type: electric, mast type: triplex, construction height: 3,360 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 3,725 kg, total height: 3,360 mm, total length: 1,800 mm, total width: 1,260 mm, fuel: electricity, Equipment: sideshift, OM XR 14 – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 8.290 mm Closed height: 3.360 mm Free lift: 2.750 mm Mast: Triplex (3F829) Fork length: 1.150 mm Fork carriage: FEM 2B Drive: Elektro 48V Battery: 48 V/620 Ah (2010) Charger: 48 V - not tested Tyres: Bandagen Service weight: 3.725 kg Length: 1.800 mm Width: 1.260 mm Year of manufacture: 2010 Operating hours: 6.015 h Bodpfx Adez Apugjhslp Condition: working condition EQUIPMENT 4th valve ATTACHMENTS Sideshift Internal no.: 1308832 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,744 h, load capacity: 1,400 kg, lifting height: 1,924 mm, free lift: 879 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,470 kg, total height: 1,415 mm, total length: 2,170 mm, total width: 800 mm, fuel: electricity, LINDE D 14 AP – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 1.924 mm Closed height: 1.415 mm Free lift: 879 mm Mast: Duplex (2F192) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V Bljdpfx Adez Ap Dnjhep Charger: ohne / without Tyres: Polyurethan Poly Tandem Service weight: 1.470 kg Length: 2.170 mm Width: 800 mm Year of manufacture: 2019 Operating hours: 5.744 h Condition: working condition EQUIPMENT Pulse control, Initial lift Internal no.: 1309303 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.