Used Ecomax 14 for sale (27,059)

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Phedpfx Ahecn Rdwj Usa -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Condition: used, Industrial machine type KOR with 415 V operating voltage and 220 V secondary voltage. Three-phase connection, frequency range 50–60 Hz. Operating current 3.5 A, total motor power 4.3 kW. Protection: main fuse 25 A, fast fuse 20 A. Phodpfx Asw Saa Toh Uoa

Condition: like new (used), Year of construction: 2000, functionality: fully functional, LANGZAUNER LZG-S 10/7/14 Table size 2,750 x 1,000 mm, belt length 7,300 mm Description: infinitely variable electric adjustment electric table height adjustment, Phodpfx Ahjumq Szs Usa sanding belt cover, central, clearly arranged control panel, workpiece lighting, clockwise / anticlockwise rotation, motor brake, adjustable workpiece stop, removable table insert, for sanding drawer fronts, Sanding table guide with hardened, and ground guide shaft, closed belt drive disk, dust-tested, CE version ----- Technical data ----- Projection: 1,000 x 350 mm, Motor 400 V: 5.5 kW, Removable table insert: 510 x 630 mm, sanding pad: 320 x 150 mm, Table height adjustment range: 350 mm, Ball bearings on each side: 6-fold, Belt speed: 22 m/sec, Suction nozzle Ø: 180 mm, weight: 900 kg Very good condition, see pictures

Condition: used, functionality: fully functional, load capacity: 6,000 kg, lifting height: 4,500 mm, load center: 700 mm, fuel type: gas, mast type: simplex, fork length: 1,400 mm, tire condition: 30 %, rear tire size: Luft, Device is roadworthy and functional. Pedjv T Agnspfx Ah Uoha

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-2, Filter plate specification: 390x390 mm Filtering area 2.8m2 Number of filter plate 14pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 35L Filtrate Pedpfx Aob Dluyoh Uoha discharge Open type outlet Construction material for framework Main material for framework is SS 316. carbon steel. Contact parts in PVC or SS. Material of filter plate Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 1695X750X630mm Weight 610KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: good (used), functionality: fully functional, machine/vehicle number: 9181, Year of construction: 2016, operating hours: 15,452 h, load capacity: 3,000 kg, lifting height: 4,540 mm, free lift: 650 mm, fuel type: diesel, mast type: simplex, TECHNICAL DETAILS Engine: Diesel VM Lift capacity: max. 3,000 kg LSP: 700 mm Mast & Lifting System Lift height: 4,540 mm Free lift: 650 mm Mast type: Standard Mast height: 3,100 mm Platform width: 1,400 mm Platform height: 820 mm Forks Fork dimensions: 150 mm x 50 mm x 1,370 mm Fork carriage width: 1,300 mm Tires Tire type: Pneumatic Tire size: 27x10-12 Phsdov S Ewgspfx Ah Usa EQUIPMENT - Cabin - Heating

Year of construction: 1983, condition: used, PLC control, machine control, module -Product number: 5638 Pjdod Tn A Sspfx Ah Ujha -Serial number: 109-264-4201b-1 -Dimensions: 190/130/H20 mm -Weight: 200 g

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Phodpfx Ajwbvmish Uea Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 3,507 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 67 kW (91.09 HP), color: yellow, fuel: diesel, Equipment: clamp, sideshift, The sideloader is in good condition, serviced and ready for use, but is now being sold due to a new purchase. Pjdpfetqmqpsx Ah Ujha

Condition: used, Year of construction: 2003, First registration: 26.03.2003 / _____ / with rear roller / new bearings / / with cam packer rear roller / with / catch hooks / 900 ring diameter / / Phedpfxsqrrt Ns Ah Uea

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 6,963 h, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,675 mm, fork length: 1,400 mm, drive type: Treibgas, Sideloader Mast type: Triplex Technical condition: good Pjdpfx Ahou Ac Hwo Ueha

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: IRN5518, Year of construction: 2008, operating hours: 12,909 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, overall weight: 10,850 kg, TECHNICAL DETAILS Engine: Perkins Diesel Lift capacity: max. 7,000 kg LSP: 700 mm Tires: Pneumatic, 355/65-15 Mast & Lifting System Lift height: 4,500 mm Mast type: Standard Mast height: 3,200 mm Platform width: 1,400 mm Platform height: 1,070 mm Fork positioner: 450 / 1,415 mm Pjdpfx Aev S D Dloh Usha Forks Fork dimensions: 200 x 50 x 1,400 mm Fork carriage width: 1,460 mm MACHINE DETAILS Length: 5,050 mm Width: 2,250 mm Height (total): 2,850 mm Weight: 10,850 kg EQUIPMENT - Cab - Heating

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm Phodpjb A Tbdsfx Ah Uja -Weight: 36.5 kg

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Phedpsxr S Rpjfx Ah Uea Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Condition: good (used), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH PREPARATION BELT AND OUTPUT BELT OSAMA TYPE S4R/P-1400 GLUING MACHINE, 4 ROLLERS Pedpfx Aovtx Hkeh Ujha

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN6964, Year of construction: 2013, operating hours: 20,687 h, load capacity: 5,000 kg, lifting height: 7,500 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Motor: Electric Battery: 80 V, 930 Ah Battery Year of Manufacture: 2013 Lift Capacity: Max. 5,000 kg (LSP: 700 mm) Tires: Pneumatic, 355/45-15 Mast & Lifting System Lift Height: 7,500 mm Free Lift: 2,450 mm Mast Type: Triplex Mast Height: 3,360 mm Platform Width: 1,400 mm Platform Height: 850 mm Fork Positioner: 420 / 1,410 mm Forks Fork Dimensions: 200 x 50 x 1,400 mm Phsdpev S Dn Rsfx Ah Usa Fork Carrier Width: 1,460 mm MACHINE DETAILS Length: 4,400 mm Width: 2,220 mm mm Height (total): 2,680 mm Weight: 8,950 kg EQUIPMENT - Cabin - Heating

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -unfortunately no nameplate therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Acquisition shaft: Ø 40 mm -Tool: Ø 165 x 10 mm Pedpeb A Ngnefx Ah Ueha -Dimensions: 500/250/H160 mm -Weight: 42 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN7128, Year of construction: 2014, operating hours: 2,695 h, load capacity: 5,000 kg, lifting height: 9,000 mm, free lift: 2,500 mm, mast type: triplex, overall weight: 8,950 kg, TECHNICAL DETAILS Motor: Electric Load capacity: max. 5,000 kg LSP: 700 mm Pjdpsv S Dklofx Ah Ujha Battery: 80 V, 930 Ah Year of manufacture: 2014 Tires: SE, 355/45-15 Mast & Lifting System Mast type: Triplex Mast height: 3,900 mm Platform width: 1,400 mm Platform height: 860 mm Lift height: approx. 9,000 mm Free lift: approx. 2,500 mm Forks Fork dimensions: 180 x 50 x 1,400 mm Fork carriage width: 1,370 mm MACHINE DETAILS Length: 4,400 mm Width: 2,220 mm Height (total): 2,700 mm EQUIPMENT - Charger - Fork positioner - Cab - Heating - 1 NIVO fork

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -unfortunately no nameplate therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Acquisition shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm Phjdpfx Asb A Hhtsh Uoa -Weight: 42 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN6618, Year of construction: 2012, operating hours: 12,731 h, load capacity: 5,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: simplex, TECHNICAL DETAILS Motor: Electric Battery: 80 V, 1,240 Ah Battery year of manufacture: 2016 Load capacity: max. 5,000 kg LSP: 600 mm Tires: Pneumatic, 355/65-15 Pedpev S Arusfx Ah Ueha Mast & Lifting System Lift height: max. 4,000 mm Mast type: Standard Mast height: 2,900 mm Platform width: 1,400 mm / 1,200 mm Platform height: 1,000 mm Pantograph reach: 1,240 mm Forks Fork dimensions: 150 x 60 x 1,200 mm Fork carriage width: 1,460 mm MACHINE DETAILS Length: 4,800 mm Width: 2,250 mm Height (total): 2,750 mm EQUIPMENT - Charger - Cab - Heater

Condition: used, Collet holder, tool holder, tool holder, milling holder, milling tool -Milling adapter: SK50 5 pieces -Type: different versions see photos -Tool holder: Ø 12/14/16 mm -Price / fee: complete Podpfshc Ux Ejx Ah Ujha -Dimensions: 400/300 / H160 mm -Total weight: 19.1 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 180 x 40-55 mm Phsdpfx Aeb A I Aioh Uoa -Dimensions: 540/250/H160 mm -Weight: 46 kg

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm Pedjfgwv Dopfx Ah Ueha -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Mounting hole distance: 100 mm -Number: 2 pieces Phodpfjfgwv Isx Ah Uja -Price: complete -Dimensions: each 160/14/H50 mm -Weight: 0.8 kg/piece

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1: 2.5 -Voltage: 220/380 volts -Take shaft: Ø 30 mm Phsdsb A Hn Sjpfx Ah Uea -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg