Used Edge Bending Machine for sale (92,640)

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu wall strength 2.0 mm bar material - diameter 30.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed Tedpfoxaa Sdsx Aacod - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), Year of construction: 2014, Drive 1.5 kW Belt speed 16 m/sec Belt width 150 mm Belt length 2270 mm Table size 680 x 310 mm Tsdpfxjxqy S Sj Aaced Required space approx. 1350 x 600 mm Weight approx. 162 kg Extraction ports 2 x 100 mm All information has been taken from a brochure, therefore provided without guarantee. Technical data on request – see images for equipment details.

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual Todpfx Aajtpn Etsced A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Todpfx Aexn T Nrsacjd Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: ready for operation (used), Chamfering machine FS500 Schallberger Technical data: 1200-8000 rpm, chamfer angle 45°, micrometer screw adjustable 0-5 mm, connection 230V, 50 Hz, weight 47 kg. Machine includes base cabinet and extraction unit. Tedpfxextt H Us Aacod

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Tsdexfh Tmspfx Aaced Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers Tjdpfjv Sv Ensx Aacod With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 2013, Cartridge system (for rolls and strip material) Reinforced cutting cylinder Cutting unit Todpjxqy Elsfx Aacjd Multi-function milling station (chamfer-flush-radius) Pull scraper Edge thickness 0.3–3 mm External dimensions L x W x H approx. 3060 x 1040 + magazine plate overhang) x 1350 mm All information without guarantee; data obtained from a brochure.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Tsdpfx Asxn Hzboacsd Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. Tsdpfsw Sn I Eex Aacsd The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: good (used), Year of construction: 2019, Serial no.: 8.851.053, milling unit, material thickness 2 - 6 mm, speed 12,000 rpm, 10 pressure rollers, model Fresatrice Pigatrice Alu Bender, 8 ball roller tables, each approx. 1,900 x 900 mm, aluminium Todpfxsxl At Io Aacjd

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Tjdpfjxq Apgjx Aacsd

Condition: used, functionality: fully functional, Year of construction: 2019, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 360 kg, power: 1.5 kW (2.04 HP), Shaft Ø: 50 mm. Round bar: Ø35 mm. Ø600 mm. Square bar: 35 x 35 mm. Ø1200 mm. Tedpfjxphppex Aaced Flat bar: 120 x 15 mm. Ø750 mm. Flatbar on edge: 60 x 10 mm. Ø800 mm. Pipe: Ø70 x 2 mm. Ø1200 mm. Angle iron: 50 x 5 mm. Ø1200 mm. Working speed: 4,3 m./min. Motor: 1,5 kW. Year: 2019 Country of origin: Turkey. Size (L x W x H): 850 x 950 x 1300 mm. Weight: 360 kg. Diameter top/lower rolls: Ø155 mm. With 2 powered rolls and pipe rolls for 3/4" & 1". Machine can be used horizontal. Very good condition. All our used machines are tested and serviced before delivery.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Tsdpoxtfchsfx Aaced Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: used, Year of construction: 1998, Used machine Tjdpfswkba Tsx Aacod Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Tedpfx Ajq Sz Ahsacsd Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: good (used), ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Two-roller round bending machine for gutter production Condition: good Offer type: used machine Technical data: Capacity: 2040 x 1.0 mm Drive type: electrical/mechanical Drive: 0.8 kW Note: with 4 shafts for different gutter diameters: 55, 60, 70, 85 mm Weight: 550 kg Tedjq R Ub Ajpfx Aaced The machine is in good and immediately operational condition and can be inspected and demonstrated at our premises. We would be pleased if our offer is of interest to you. Errors, changes, and intermediate sale excepted.

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm Tedpfol D Rx Ujx Aacsd weight: 842 kg

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm Tedpfx Ajpgmtwjacod max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm backgauge manually adjustable up to: 540 mm weight: 285 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, Equipment: documentation/manual, foot remote control, hardened rollers, Metallkraft PRM 35 F – motorized ring bending machine, suitable for horizontal and vertical operation For profiles and pipes with foot control Heavy-duty welded steel construction Usable in both horizontal and vertical positions Lower rolls are motor-driven Rolls are hardened Shafts made of steel, hardened and ground Adjustment via upper roll Lateral guide rollers, continuously adjustable Powerful 400 Volt motor Left/right rotation via foot pedal Bending machine with 2 driven rolls, control panel, and options for horizontal or vertical working position – for pipes and profiles, digital display for upper roll adjustment Standard bending roll set made of hardened steel Shaft diameter: 50 mm Roll diameter: 155 mm Speed: 4.5 m/min Motor output: 1.5 kW / 400 V Digital display for adjustment values Additional plastic bending roll set for round material Ø 25 mm Price / details on request All technical specifications provided are subject to possible errors or misprints. Sales exclusively to member countries of the European Community. Todpfx Aaowx Ixxocod

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec Tsdpjgvkigjfx Aacod tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: new, Year of construction: 2025, Gluing unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: 8 mm - 50 mm Workpiece width: min. 110 mm Glue pot: granulate, quick-change pot Tsdpfjxrbibsx Aacod End trimming shears: yes End trimming / flush cutting: yes Milling station: chamfer / radius Flat scraper blade: yes Radius scraper blade: yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 623 kg

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm Tedpfx Aaspgmqiecod power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered. Tjdpfx Ajgvkmrjacsd

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document Tjdpepgmq Ujfx Aacod