Used Edge Glue Machine for sale (64,875)

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 Nodpoxxy Rkefx Afhswb 2 glue tanks + 1 glue tank for spare parts

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. Njdpsf Tc Rqofx Afhswb We supply new glue tanks or overhaul your used one. We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, Nodpfx Aju R S Nwefhewb pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: good (used), Sumbel Perkeo Edge Gluer This machine is fully operational and ready for production. This is the most valued brand among small laminators. Ideal for the production of covers, decorative packaging, etc. Made in Germany. The machine uses cold glue. Copper rollers. Smooth adjustment: glue thickness and gap width. Set of separators. Easy cleaning without the need for tools. Nwsdpex A Sdqsfx Afhjb 230V power supply. Weight: 15kg. Roller width: 60mm.

Condition: used, Year of construction: 2015, Brand: Piovan Type: Dryer HR2000651 Nwodpfx Asxvdh Iefhsb Model: HRM200 Serial No.: 08 020 044/07 0135 Dry Air Quantity: 200 m³/h Hopper capacity: 3 × 300 dm³ Connected load max: 38 kW Year of manufacture: 2015 and Model: PTUSET Year of manufacture: 2017 Connected load max: 9.0 kW

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Nwjdpfx Aoq Ny R Sefhjb

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, LBK.150 LBK-150 Nwsdpfoya H Nqjx Afhob LBK004 Worktable extension LBK005 Motor with 2 speeds 700/1400 rpm LBK008 Base for mounting feed unit

Condition: like new (used), Year of construction: 2022, Offered for sale on behalf of a customer. Used only once. Nsdpfx Afoyc Nrtshswb If you have any questions or are interested, please feel free to contact us.

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm Nwodpfeucgvasx Afhsb serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, chassis, motor power 2.2 kW, 4-roller feed, Haffner stepless feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, swiveling range 45°-90°, 2 x 100 mm ø extraction ports, length 1800 x 1000 mm, weight 310 kg, good condition. Price ex works. Transport available at extra cost! Njdpfx Aoyayutjfhjwb

Condition: new, Model Name Nwodpegvqxtefx Afhjb FALKEN R 1

Condition: used, Edge finishing machine Rehnen Type KBA for automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise grinding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for carpentry, furniture construction and industrial wood processing. Includes spare abrasive belts and cutters. workpiece height: 20-90 mm Unit 1: Grinding unit, oscillating Unit 2: Milling unit top and bottom Nwsdpfxeyb Sdce Afhjb Unit 3: Profile grinding unit equipment: For edges R5

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Nwsdjxpn Ufopfx Afhjb Feed speed 8 m/min.

Condition: used, Year of construction: 2004, machine/vehicle number: 59274, type of input current: AC, input voltage: 230 V, disc diameter: 150 mm, FRANK Surface Grinder GECKO S Nwsdpoycuy Nsfx Afhjb Technical data: • Motor voltage: 230 V • Motor power: 1,500 W • Grinding disc diameter: 150 mm • Weight approx. 6 kg The machine has been overhauled in our workshop and is fully operational. The machine is supplied including power cable and dust bag. Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Njdjxy Tm Ijpfx Afhswb

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Nsdpfx Ajx I Sgrefhewb Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg

Condition: good (used), Year of construction: 1998, 0.4-5 mm Nsdpfx Aox Tu Rdjfhowb Workingpiece thickness from to 10-50 mm Total length 2730 mm Weight 720 kg

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Njdpoxfh Tmsfx Afhowb Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Year of construction: 1996, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head Nodsd Dzliopfx Afhewb -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available Nwodpfxocx Ifio Afheb -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm Nodsvy Sqvspfx Afhewb -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor Nwodpfx Afob A Tcwjhob -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm Nwedpfjb A Nmiex Afhob -Weight: 20 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm Nwsdjb A Rybopfx Afhsb -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 70.12-2 D -Power: 5.0 kW 5860 rpm Nsdsw Av R Repfx Afhjwb -Voltage: 400 V / 100 Hz -Mounting shaft: Ø 40 x 80 mm -Number: 4x motor available -Price: per piece -Dimensions: 480/232/H150 mm -Weight: 34 kg/piece