Used Eisele for sale (123)

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Lodpfxjzqtnts Aazort Technical data: - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW Lsdpfxeilfp No Aazsrt weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Condition: used, Year of construction: 1975, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 150 x 110 mm capacity 45 degrees: flat 120 x 100 mm engine output 1,8 / 2,6 kW Lrjdpfx Aajw Nrvbszot 500 mm weight 450 kg dimensions ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm turning speeds 40/80 U/min miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Lredpfx Aswglgisazst Accessories: Coolant device Underframe with 2 drawers

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 Lrodetxkprspfx Aazot -Cutting length: 250 to 5000 mm -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Lrodpfxszp Rhhj Aazet

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Lredpfezcpv Sox Aazjt

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R Ledsyub N Uopfx Aazsrt We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t Lrjdsw Dvivjpfx Aazjt

Condition: excellent (used), Year of construction: 1999, O F F E R Lrjdpfx Ajx A H Rrjazet We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Lrodpfx Aaet A Ar Sozjt Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push length of the material pusher maximum 6,200 mm Lrjdpfxjwx I Hvj Aazet System is dismantled in our warehouse Further technical data on request

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Lrsdey Tizkspfx Aazst Price: 2,000 Euros

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) Lsdpfxoxn Iq Ds Aazort 1000 kg

Year of construction: 2016, condition: used, Max. push length: 3000 mm Sled can be folded up Manual movement Right-hand attachment 2 adjustable feet Plastic rollers Lrsdpfeza Akwex Aazot

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Ledpfjq Awg Ejx Aazert

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Ledpfsrv A Hmex Aazert Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Lsdozpfgrepfx Aazjrt Mitre cut one-sided 45°.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Type: AKF 250L Motor: 400V, 2.2kW Speed: 2800 rpm Arbor diameter: 250mm Arbor shaft diameter: 40mm Lrjdpfx Aaszvz Dyozjt Cutting width: 300mm Cutting depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Lrjdszvz Dtepfx Aazet Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Condition: good (used), Year of construction: 2002, Saw blade diameter: 350 mm Cutting capacity: Round: 120 mm Square: 100 x 100 mm Lsdpfx Aoy Uv Itsazort Rectangular: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Space required approx.: 800 x 700 x 1770 mm

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Lrodpfx Aeznc S Aeazst Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Punching unit, complete with base frame Drive: Hydropneumatic Iebp Icsy Hriwsr Nvoba Maximum punching force: 50 kN at 10 bar Stroke: 40 mm Standard installation height (daylight): 140 mm Maximum installation height: 200 mm Overhang (punch to rear of machine): 110 mm Table size: 250 × 200 mm Dimensions (W × D × H): 250 × 450 × 630 mm Lrsdpfsy S Abbjx Aazet Weight: approx. 67 kg Operating pressure: max. 10 bar

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW miter ja Ljdpfxevu Hlke Aazsrt weight 700 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: Lsdpfx Aajf Dwa Uezert The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++