Used Ejector Sleeve for sale (1,492)

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm Psdpfx Ahevxuc Eo Ujha spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: good (used), Tool holder, milling tool holder Phodob A Rr Djpfx Ah Usa -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 90 kg

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. Pedpfx Aswphixoh Ueha - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 Podpjgrzh Esfx Ah Ueha 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Tailstock: -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment Pedpfxsxzuvtj Ah Ueha -clamping sleeves -tool holders -spare parts -technical documentation

Condition: like new (used), Year of construction: 2025, product width (max.): 340 mm, Unwinding Web guiding Corona treatment Web cleaner 8 x flexo print stations 8 x GEW UV dryers, GD3 8 x chill rolls 1 rail system 1 cold foil unit 1 lamination unit 1 print-on-glue unit for 2 colors Video inspection Register control Rewinding unit Waste rewind 1 rotary die cutting unit Chilling machine 8 x sets of printing sleeves with magnets Podpfxox I D Uhe Ah Uoha 8 x anilox rollers

Condition: good (used), Year of construction: 2007, operating hours: 47,792 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h clamping force: 900 kN Psdpfx Ahsx Ic Duo Usha size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm centering diameter of fixed platen: 125 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set Phedpeb A Rr Aofx Ah Uea -Weight: 88 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 21400240015, REF: MM6226 1 x CEIA S.p.A. pipeline metal detector with rejector system into bin. Suitable for sauces, liquids, soups, etc. Phjdpfexqmw Uex Ah Usa Technical specification ⚙️ ✅ Model - T/PLVMS21-50.  ✅ Serial number - 21400240015. ✅ Date of manufacture - 2014.  ✅ Pipe dimensions - 50mm diameter.  ✅ Electrical requirements - 100-240 V / 50-60 hz / 1 phase. 

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Phjdpfxevimd Nj Ah Uea Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: new, Heidenhain ULS 300/20 length measuring rod. 239 740-02 ML 270 mm, serial number as per photo, unused, rubber sleeve defective (porous), 100% functional Phjdoi Eazuspfx Ah Uea

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,358 kg, axle configuration: 3 axles, first registration: 07/2022, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4009mm. Phjdpfx Ahjx Eiice Usa Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes).

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar Phedpfx Ahex Icyps Usa equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Tool holder, milling tool holder -Quantity: 20x SK50 recording Phsdpfx Ahob A Rr Ee Usa -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 70 kg

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm Phodovxkv Uepfx Ah Usa - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Phsdpfxoxah Sfe Ah Uoa

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Pjdpsx Ictvefx Ah Ueha interface for dosing unit Schuko-socket 10A measures of machine l x w x h: 6.6m x 2.3m x 2.4m total weight: 12900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61

Condition: good (used), Tool holder, milling tool holder Psdpfx Asb A H Spsh Uoha -Number: 17x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 68 kg

Condition: good (used), Tool holder, milling tool holder -Number: 17x SK50 recording -Photos: MK Pedpfx Ahob A N I Te Ueha -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 68 kg

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) Psdpfjh Db Hcox Ah Usha -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: good (used), Tool holder, milling tool holder -Number: 4x SK50 recording Phsdpfx Aob A Smxjh Usa -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg

Condition: good (used), Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg Pjdsb A N E Tjpfx Ah Usha

Condition: good (used), Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm Psdpfx Ahjb A Ifqs Ueha -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Weight: 3.5 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available -Weight: 15 kg Phedpjb A Stfofx Ah Uja

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 Phodpsb A Stcsfx Ah Uja -Clamping sleeves: 28/85 mm Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece