Used Electric Deep Fryer for sale (30,107)

Condition: used, Make by : Tsuruta Electric : TBX-25K (06017) Dedpfx Asdc A Rronzowa

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release Djdpfjxv D Hqsx Anzswa The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load. Dsdpfoxv Dywox Anzjwa

Condition: like new (used), Year of construction: 2021, operating hours: 4,300 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, output current: 800 A, control voltage: 400 V, type of output current: three-phase, Main incomer switchboard Dwodpfx Aormngajnzoa 12-Way 800A TP Panel Board Used but still in new condition We brought from Schneider but it was not suitable for our usage.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box Dwodpfx Ansuhmacozja

Condition: used, Electric Motor WWE American Model !! Type WWE250-18-449T Djdpfx Anjc Sqvvszewa 460 60Hz 250 HP (PS) 1790 RPM 282A IP55

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Dedjx H Npuepfx Anzswa Machine houers 22039.

Condition: used, ROLLER ELECTRIC CONVEYORS SYSTEM 120M Stainless still Consists: 4 conveyors x 15m length 2 conveyors x 17m length 2 conveyors x 10m length 5 conveyors kurve 90 Roller width: 50 cm Roller diameter: 50 mm Drive motor system Height frame: 20cm Conveyor speed: please contact us Dodpsw D Raiofx Anzjwa Excellent condition

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, Dwedpfx Anjw Uc T Iszea loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. Djdpfjv Hchlox Anzswa 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: excellent (used), Year of construction: 2006, Double finisher 842 Multimatic with control unit year 09.2006, price € 20110 Wardrobe former and trouser topper rotatable on one column Finish drain in closed cabin integrated cabin exhaust automatically controlled doors close automatically flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory locations air volume regulation for particularly sensitive garments space-saving and virtually no stress in the work area due to finishing process externally steam-heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & co? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, coats, trousers and similar items can be finished automatically. It consists of a form finisher and a trouser topper. The two units are rotatably mounted on a column. For finishing, the previously loaded element (form finisher or topper) is swivelled into a cabin. The doors close automatically and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low-noise, small footprint. Year of construction: 09.2006 New price: 20.110 €. Dsdpfxsgtiddo Anzewa Unit runs perfectly Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, power: 568 kW (772.26 HP), rotational speed (min.): 1,502 rpm, input voltage: 520 V, input current: 1,166 A, type of input current: DC, protection type (IP code): IP23, TT Electric DC motor Type: LAKC4355K Design: IM1001-B3 Standard: IEC60034-1 Djdpjxg Rgrjfx Anzewa Duty class: S1 Input voltage: 520 V Input current: 1166 A Field voltage: 220 V Field current: 9.4 A Rated power Pn KW: 568 kW RPM: 1502

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Dwsdpfx Aogf Ix Asnzoa Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: MITSUBISHI, controller model: CR750-04VD1-1-S15, number of axes: 6, This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details. Dedpeyhddnsfx Anzswa • Quantity: 2 similar robots available • Reach: approx. 649 mm • Payload: up to 4 kg (nominal 3 kg) • Repeatability: ±0.02 mm • Protection class: IP67 • Controller: CR750 • Teach pendant: R32TB (handheld device) • Connection: Robot-to-controller cable included • Suitable for applications in industrial automation

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse • Electronic manual control panel Dodsx D Iv Sspfx Anzowa • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 5 kW (6.80 HP), overall weight: 26 kg, heating capacity: 6 kW (8.16 HP), Selling a new ceiling-mounted unit from Mitsubishi-Electric. Compatible with refrigerant R32 or R410a. Dwsdpfexu Dcisx Anzea

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Dwsdpfjw Uc Tzjx Anzja Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Lifting height: 12 m Dwjdexm Tr Dopfx Anzea Lifting speed: 8 m/min Travel speed: 20 m/min Power supply: 380 V Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, table load: 1,500 kg, Equipment: cooling unit, documentation/manual, Mitsubishi FA20-VS Wire EDM (2006) We offer for sale a high-quality Mitsubishi FA20-VS wire EDM machine, year of manufacture 2006. The machine is in very good technical condition and can be fully tested under power. Basic Technical Data Manufacturer: Mitsubishi Electric Model: FA20-VS Year of manufacture: 2006 Control system: Mitsubishi CNC Dsdsyvhtwepfx Anzowa Axis travels: X: 500 mm Y: 350 mm Z: 300 mm Table size: approx. 780 × 630 mm Max. workpiece weight: approx. 1500 kg Wire diameter: 0.2 – 0.3 mm Machine Advantages • Stable and precise Mitsubishi construction • Suitable for toolshops and series production • Reliable technology with low operating costs Condition and Delivery The machine can be personally inspected under power. Delivery may include: • Installation at customer site • Commissioning • Basic operator training Installation can be provided across the entire EU.

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Djdpfoyxfqlsx Anzewa Machine dimensions: 4200x1200x1400 (LxWxH). Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Capable of coating products up to 3.2 m wide. Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Machine is connected to utilities and can be tested on-site.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Dwsdoyf Hlispfx Anzja Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Djdpfx Anoxu Ewnszjwa

Condition: used, Electric motors Dwodpjxfvzrjfx Anzsa

Condition: used, Control cabinet, floor-standing cable rack with glass door Manufacturer: Schneider Electric Condition: used, very good Size: 59.5 x 60.5 x 191 cm Dwodpfx Anoxcxw Dezja More pieces in stock.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Dwsdpfx Anoy Aibcjzsa