Used Electric Welding Machine for sale (88,085)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² Lajdeykvdlspfx Ab Njh - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate Laodpezbvn Eofx Ab Noh - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Laedpfx Absyxy Tbo Noh Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: used, Plug-in welding control in a 19" housing Type NPS 8043-1 IQ1 with quality assurance and 50 programs Solenoid valve voltage: 24 V DC Laedpfxsdga Nbe Ab Noh complete with current measuring belt MB 260 OTHER CONTROL MODULES IN STOCK: e.g.: 8036 - 8036-S3 8033 8043 MPS 200 R1 RATIA 43a HWS 2202 Profil IQ

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D Lajdpfxszugnzj Ab Noh - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Year of construction: 2000, condition: used, Selecta S2T welding machine. Lasdpfxjz Dqx Ho Ab Nsh

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Ljdpfxszuzzpe Ab Noah

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency Lsdpfx Aexf Hv Hob Nsah TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Parallel-guided, water-cooled spot welding machine Brand DALEX Type PL 40 Rated power at 50% duty cycle: 40 kVA Secondary short-circuit current: 21.5 kA Lsdpfx Abswd I Ano Neah Secondary open-circuit voltage: 5.5 V Single-stroke cylinder - electrode stroke 65 mm Electrode force: 65-390 daN Arm reach: 450-750 mm adjustable Arm spacing: 150 or 310 mm Equipped with an add-on control cabinet in accordance with VDE 0110 Main switch Synchronous welding control system MPS 1036 Straight tubular arm with 750 mm reach Photos show loading condition (electrode arms were removed due to pallet dimensions)

Condition: excellent (used), Spot welding machine with DHZ cylinder Brand DALEX Type PMS 12-5 Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 46 kA Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Weight: 715 kg With separate central control cabinet for connecting five PMS 12-5 spot welding machines Laodpfx Aewarqnjb Njh with PLC, five power levels and one MPS 200 synchronous welding controller with eight welding programs

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. Lsdpfjz Rwiysx Ab Njah - Hose set 8m, lightweight design - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg

Condition: excellent (used), pneumatically operated, water-cooled toggle-lever spot welding machine Manufacturer: DALEX, Type: SL 202 Rated power at 50% duty cycle: 20 kVA Secondary short-circuit current: 15 kA Electrode force: 420 daN Reach: 130 - 500 Arm distance: 250 mm Single-acting cylinder - 50 mm stroke with main switch according to VDE 0113 with synchronous welding control RS 17 PICTURES TO FOLLOW Lajdpfxozw U T De Ab Njh

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Lodpfx Abexddamj Nsah

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm Lodpfxevyk Sfs Ab Nsah with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. Lodpfx Aou Tqhheb Njah With kind regards T. Becker

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate Lajdpfx Aevyq Dueb Njh -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Lodpfxov S H Rhs Ab Noah Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA Lsdpfx Ajztyn Sjb Neah 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: good (used), Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Ljdezl Dn Hepfx Ab Noah Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Guide bar lenght cm 240 Useful cutting cm 200 Electric motor Hp 12,5 three-phase Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA Lsdozfim Ispfx Ab Nsah - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate made from a tool steel Ledpehwn Tuefx Ab Noah Length: 2980 mm Width: 1580 mm Thickness: 94 mm - solid steel plate - surface milled - 4 pieces of bolted support brackets - plate with some symmetrical holes Own weight: 3400 kg

Condition: refurbished (used), Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Extra Equipment: Lasdpfx Abozwhi Sj Neh - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Laedpfx Aoz Dk Nlob Nsh Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt).

Condition: excellent (used), Projection welding machine Brand DALEX Type PM 32-5 Rated power at 50 & duty cycle: 160 kVA Secondary short-circuit current: 80 kA Secondary open-circuit voltage: 9.75 V Lsdpfxewhz Ilo Ab Nsah Electrode force: 215-1,290 daN Single-stroke cylinder - electrode stroke 100 mm Throat: 250 mm with attached control cabinet according to VDE 0100 Main switch Synchronous welding control MPS 200 Example photo Machine is currently being refurbished

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Lasdpexq Rcuefx Ab Nsh