Used Electromagnetic for sale (335)

Year of construction: 2026, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. Nwedpfx Anoy Drgdofsf The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Nedpoy Drfyjfx Anfjwf If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. Upon request, we can also offer you a suitable loading ramp, a photoelectric sensor for detecting black surfaces, or the appropriate machine film! About this model: Our "Basic" pallet wrapper is a semi-automatic stretch wrapper of European manufacture, which guarantees absolutely consistent results thanks to up to 10 programmable memory settings—effectively eliminating the "human factor." The electromagnetic brake allows you to adjust the film tension to your requirements and save these settings within the programs. Within each program, you can also set the speed of the film carriage and turntable. Top wraps and bottom wraps can also be programmed for each setting. This way, you can store individual programs for every wrapping scheme to always achieve perfect wrapping results. Nwsdpfx Aey Drcrsnfsf Weighing 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper features a 1500 mm turntable and is standard-equipped to wrap pallets up to 2000 mm in height. Automatic pallet detection (via photoelectric sensor) comes as standard, as do adjustable top and bottom wraps. If you need to reposition the wrapper, it can be easily moved with a forklift via integrated cut-outs. This model is our recommendation if you are looking for a reliable and cost-effective pallet wrapper that can be adapted to your requirements. About us: We believe business is done between people, not just companies! A supplier delivers the goods you order—a partner does more: they help you find the best products, support you in achieving your goals, and are by your side when challenges arise. This is our conviction. For over 40 years, now in our fourth generation, we have been the partner for SMEs when it comes to "stretching and sealing." Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your needs!

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photo cell for black object detection, or the appropriate machine film! Nodpfxjy Drb Uj Anfswf About this model: Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby reliably eliminating the “human factor”. The electromagnetic brake allows you to precisely set and store the film tension at each stage (bottom wrap, upward wrap, top wrap, downward wrap) within the programs. Within each program, you can additionally specify the speed of the film carriage and turntable. You can also store head wraps, bottom wraps, and the film overlap at the end of the pallet for each program. This allows you to create individual programs for every packing pattern in order to achieve optimum wrapping results every time. The programs can be password-protected, so the operator can only select from the preset programs. With a weight of 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and can wrap pallets up to 2500 mm in height as standard. Automatic pallet detection (via photo cell) is standard, as are adjustable head and bottom wraps. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift slots. This model is our recommendation if you require a professional and robust pallet wrapper for higher volumes, which can be optimally adapted to your needs. Do you need a larger turntable, a taller mast, film pre-stretching, or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with exactly the options you require. About us: We believe that business is conducted between people! A supplier delivers the goods you ordered—a partner does more: they help you find the best solution, support you in achieving your goals, and assist you in overcoming problems and challenges. This is our conviction. For over 40 years and in the 4th generation, we have been the partner for SMEs in all matters relating to “stretching and adhesive solutions.” On request, we are happy to advise you as to which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. Nwedey Drbnspfx Anfsf About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. Nwodey Drbhopfx Anfjf About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Nwjdsb Dxnwjpfx Anfof Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. Nwodpfjfhv Tqjx Anfsf 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Condition: new, Year of construction: 2026, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm Nwjdpeffwfxofx Anfef 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Nsdpfx Aney Agpqofswf well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: Nsdpfxofg U Tqj Anfewf - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min Nwsdpofg U Tpsfx Anfef transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation Nsdpfjfg U Tnsx Anfjwf - Height-adjustable chip protection hood with microswitch - CE mark

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. Nwjdpfxewf Iq Uo Anfef - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition.

Condition: used, Year of construction: 1978, grinding length 600 mm grinding width 300 - 320 mm Electromagnetic clamping plate 500 x 200 mm Njdpfecwic Iex Anfewf Important note! There is no hydraulic and no coolant unit included! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, +++ Buy +++ Lease +++ Rent +++ Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Jetting Installation €1,707.09 per month plus VAT, 60 months term, 40,000 km per year, business customers only Nwedpfxoy Ac Ipo Anfsf Internal Number: #560 Rockstroh Drain Jet 100-1 * Power take-off from Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass system * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with slip-resistant surface * Basic set of cleaning nozzles Special equipment: Second battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, single-pole battery disconnect switch, driver assistance system: traffic sign recognition, chassis: stabilization level III, electric parking brake, all-weather floor mats, vehicle without lashing eyes, PTO gearbox lock, front cup holders, A-pillar grab handles, additional main key, rear doors (opening angle 270 degrees), flip-top storage compartment, terminal strip for electric connections (under driver seat), comfort lighting in passenger/cargo area, dashboard loading package (additional USB ports and 12V socket), cable duct at rear portal, cable duct at side wall, navigation system for MBUX multimedia system, PTO 2B with intermediate shaft, programmable special module, crossmember for trailer hitch, crossmember with integrated step, driver’s cab seats: comfort passenger seat, driver's seat comfort, fuel sender for auxiliary heater, cutoff relay with additional battery, reinforced front axle, pre-installation for transmission oil cooling, permissible gross weight 3.88t, soft-close aid for sliding door right Additional equipment: Third brake light, storage compartment above windshield, storage below passenger dashboard, adaptive brake light, passenger airbag, driver airbag, acoustic package, hill start assist, trailer hitch: electrics for trailer socket, electrically folding mirrors, electrically adjustable and heated mirrors (both sides), mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio), roof light in cargo area with door contact, automatic headlights, entry handle on rear right C-pillar, entry handle for sliding door at partition, assistance systems: turn-off assist, active brake assist, active lane keeping assist, start information assist, Attention Assist (drowsiness detection), Intelligent Speed Assist, breakdown management, crosswind assist, digital tachograph, 250 A alternator, speed limiter 90 km/h, body: standard panel van, instrument cluster with color display, LTE communication module for digital services, fuel tank: main tank 93 liters, full partition wall, multifunction steering wheel, truck registration, ...

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee Njdpfx Aoyx Nadjnfswf

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed Nwsdpewlvlasfx Anfof - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: ready for operation (used), Year of construction: 1991, grinding length: 1,000 mm, grinding width: 500 mm, capacity 1000x500MM electromagnetic 1000x500MM grinding wheel 400x50x127MM visual readout Z axis weight 5000KGS Nedpfxsypv Rps Anfewf

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI with Leistikow B55 High-Pressure Flushing Installation Internal Number: #527 Leistikow B 55 * PTO from Sprinter * AQUABAR KF32/36 high-pressure pump * approx. 120 liters per minute at 170 bar (40kW) * Pressure control and safety valve * 1st hydraulic high-pressure hose reel for approx. 120m DN19 * 2nd hydraulic high-pressure hose reel for approx. 80m DN13 * Fill hose reel with approx. 60m DN20 * Approx. 1,600-liter water tank * Water shortage safety device * Electric filling unit with overflow protection * Electronic speed control * Bypass switch * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting Nwodsyzllbepfx Anfjf * LED beacon lights * Various storage options * Adjustable heavy-duty shelf * Basic set of cleaning nozzles Special Equipment: 2nd battery (auxiliary battery) in engine compartment, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery disconnect switch, Driver assistance system: traffic sign recognition, Tachograph controls front under headliner, Suspension: Stabilization Level II, All-weather floor mats, Vehicle without lashing eyes, Transmission lock for PTO, Front cup holder, A-pillar grab handles, Additional master key, Rear doors (opening angle 270 degrees), Storage compartment lid, Terminal strip for electrical connections (driver seat base), Comfort lighting in passenger/cargo area, Dashboard charging package (additional USB ports and 12V socket), Cable duct at rear portal, Cable duct on sidewall, Navigation system for MBUX multimedia system, Fog lights with cornering function, 2nd PTO with layshaft, Programmable special module, Cross-member with integrated step, Sliding door on left cargo/passenger compartment, Rear mud flaps, Seats in cab: Driver comfort seat, Fuel sender for auxiliary heater, Additional battery isolator relay, Reinforced front axle, Pre-installation for transmission oil cooler, Winter package, Soft-closing left sliding door, Soft-closing right sliding door Further Equipment: 3rd brake light, Storage compartment above windshield, Storage compartment below dashboard passenger side, Adaptive brake light, Passenger airbag, Driver airbag, Acoustic package, Hill-start assist, Trailer hitch: trailer socket wiring, Exterior mirrors electrically folding, Exterior mirrors electrically adjustable and heated, both, Exterior mirror with blind spot assist, Outside temperature display, DAB tuner (digital radio reception), Ceiling light in cargo area with door contact, Automatic headlights, Grab handle on right rear C-pillar, Grab handle for sliding door on cargo partition, Driver assistance system: turning assistant, Driver assistance system: active brake assistant, Driver assistance system: active lane-keeping assistant, Driver assistance system: start-off information assistant, Driver assistance system: Attention Assist (drowsiness monitoring sensor), Driver assistance system: intelligent speed assistant, Driver assistance system: breakdown management, Driver assistance system: crosswind assistant, Digital tachograph, 250A alternator, Speed limiter to 90 km/h, Body/configuration: standard high-roof van, Instrument cluster with color display, Communication module (LTE) for digital services, Main fuel tank 93 liters, Continuous bulkhead, Multifunction steering wheel, Truck registration, Marker lights

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Njdpfswdmy Sox Anfowf Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices Njdpfsyx A Rijx Anfjwf • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. Nodpfx Ajykubisnfjwf LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Nodpsykty Djfx Anfewf ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Nedpfx Ansyyvvhefjwf Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater