Used Embossing Press for sale (12,150)

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec Fjdpefhcc Hefx Aa Ejfw pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Ffsdpfx Aaedxrqwo Ejw Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ffedpfoylb Edox Aa Esw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2007, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm]: 2210 Pressing force [tons]: 85 Controller: TRUMPF TASC 6000 Operating hours [h]: 90816 Hydraulics ON [h]: 57234 Standard Equipment: - Rigid machine frame in all-steel construction - Stress-relieved press beam - 4-cylinder upper drive - Block hydraulics with quiet double pump - Backgauge with CNC-controlled X and R axes - Manual upper tool clamping - Hydraulic lower tool clamping Ffodsytfrwspfx Aa Eew - Manual crowning - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control - Standard safety features + Increased installation height/stroke +230 mm + 6-axis backgauge system + Hydraulic upper tool clamping + CNC-controlled crowning + BendGuard + 2x support consoles + Short park position (190 mm) + Rear work area lighting + Front work area lighting

Condition: good (used), functionality: fully functional, Year of construction: 2010, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system Fsdpfx Aaoytfqms Eofw - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers Fedpfeytfnlox Aa Ejfw + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 130 t, Bending length [mm] 3230 Pressing force [ton] 130 Control system TRUMPF TASC 6000 Basic equipment: - Sturdy machine frame as all-steel welded construction - Pressure beam with high bending strength Fsdpfx Aasytfkte Eefw - Electro-hydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge with rack-and-pinion drive for X and R axes, safe repositioning of the backgauge fingers from the front - Upper tool clamping system "New Standard Clamping II", manual - Lower tool holder for EV dies, hydraulic clamping, programmable positioning (2 positions) - Safety device, rear roller safety cover - Control cabinet air conditioning - Network capable - Manual crowning, centrally adjustable + Increased installation height / stroke +230mm + 6-axis backgauge system + Hydraulic and hardened upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Rear workspace lighting + Front workspace lighting

Condition: used, Year of construction: 1989, pressure 20 t total power requirement 20 kW Fsdpfxjvr Hkze Aa Eefw weight of the machine ca. 5 t

Condition: good (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 64511, stroke length: 500 mm, pressing force: 100 t, Very rarely used test press for running in new tools. Machine works perfectly Pressing force: 100 tons Distance table - punch: 500 mm Table size 1100 x 800 mm Weight: approx. 7 tons Dimensions: 2300x1100x3000 mm (LWH) Hydraulic unit: 1200x1200x1600 mm (LWH) Ffodpfx Aaom Rgh Te Eow Free loading

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, ELECTRONIC RETROFIT IN 2001 Maximum press force 2000 kN That equals 200 tons Maximum working length 3100 mm Maximum stroke 400 mm Throat depth 250 mm Ffsdpfx Aajyf Ibxo Eew Machine weight 16,600 kg Electrical data Operating voltage 400 V, 50 Hz Control voltage 24 V DC Power Main motor 22 kW Total connected load 28 kW Fuse rating 100 A Hydraulic oil specification HLP46 or HLP68 HM46 or HM68 his machine is equipped with CNC numerical bending control. Bending method 3 point bending, Normal mode Measurement and positioning axes visible in control Y1 and Y2 for ram positioning X axis for backgauge depth Z axis for backgauge lateral positioning R axis for backgauge height Typical positioning accuracy for this class of machine Backgauge repeatability approx ±0.05 mm Bending angle accuracy depends on tooling and material, typically ±0.3 to ±0.5 degrees The control calculates bend angles based on Material thickness Tool geometry Press force Bend allowance Main intention of use The primary purpose of this machine is precision bending of sheet metal parts. Typical operations Straight bends Box shapes U bends Complex multi step formed parts It is designed for medium to heavy gauge sheet metal over long bending lengths.

Condition: ready for operation (used), Year of construction: 1992, Immediately available from site: Hydraulic press brake Piesok ESPE Model CTO 160/4000 Year of manufacture: 1992 Fsdpfx Aeyta Erja Ejfw Bending length: 4000 mm Pressing force: 160 t Drive power: 15 kW Large selection of tools included Weight: 12 t Price: EUR 7,500—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1971, Immediately available from CH toolmaking plant: Eitel Hydraulic Straightening Press Type RRP 25 Year of manufacture: 1971 Ffodpfeytaypjx Aa Eow Pressing force: 25 tons Complete straightening equipment and accessories 2 extension tables right/left, each 3000 mm Hydraulic fine adjustment system Weight: 2,500 kg Price: EUR 2,000 plus VAT ex works

Year of construction: 2021, condition: as good as new (ex-display), It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Fodpfx Aasigg E He Eofw Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: good (used), Year of construction: 2012, functionality: fully functional, Infeed Baling press Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year: 2012 Drive: 30 kW Press force: 50 t Feed opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. fill volume: 1.06 m³ Fodpfxeyma Rzs Aa Eofw Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: paper, cardboard, film, PET bottles Please note: All technical data is based on the manufacturer's information. We assume no liability for the stated specifications or any possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Ffodpfx Asgrki Sja Eow Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2018, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec Fedefxyklspfx Aa Esfw down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: new, machine/vehicle number: DF0177, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm Ffedpfofxyhijx Aa Eew power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system Ffjdpfxjxd Tiqe Aa Esw - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9,000 h, bending force (max.): 100 t, working width: 3,100 mm, stroke length: 350 mm, overall weight: 8,300 kg, Equipment: CE marking, A TRUMPF TruBend 3100 press brake from 2017, ready for immediate use and in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine offers a maximum press force of 100 tons and is equipped with an advanced control system featuring graphical visualization. The machine has only 9,000 operating hours. Added benefit: With the purchase of this machine, one week of training at our facility is possible, ensuring you can start immediately and work optimally. Ffsdpfx Aaoybax Uo Eew Manufacturer: TRUMPF Model: TruBend 3100 Year of manufacture: 2017 For more information or if you have any questions, please feel free to contact us.

Condition: excellent (used), LANG Makro•Grip®, stamping station 41200 / 41350 Overall length: 630 mm Width: 125 mm ----- Condition of the item: The vise originates from a company liquidation. Fedpfxeytd Nns Aa Eefw Good used condition.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Fodpfx Aaoyngw De Ejfw Model: V-Press 1160 plus Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing

Condition: good (used), Year of construction: 2002, functionality: fully functional, ROLAND 906-6 LVV - Year 2002 6 colors + conventional varnish + UV varnish Total impression count approx. 340 million Sheet-fed offset press - Printing units: 6 + 1 conventional varnish unit / UV varnish (dryer 3+3) Including hybrid rollers High-pile and extended delivery Technical features: Speed: 13,000 sheets/hour Max. paper size: 1020 x 1420 mm Min. paper size: 600 x 850 mm Thickness: 0.2–1 mm RCI - ink control system APL Dampening solution refrigeration unit IR hot air dryer Inking unit temperature control device Varnish preparation system Fodpfoyn Immex Aa Esfw OXY-Drey de-dusting system Eltosch drying (IR hot air drying system in the extended delivery - hybrid) 3x conventional IR dryers 3x UV dryers in extended delivery Non-stop operation Temperature control Varnishing unit: Interdeck doctor blade system

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminium or steel chips Fodpfx Aasw Ig Sue Eofw Extremely high pressing force of 3,700 kg/cm² Large hopper: 600 x 1,500 mm Briquette size: 60 x 40 mm Throughput: Aluminium chips – up to 70 kg/h Steel chips – up to 180 kg/h Brass chips – up to 220 kg/h *depending on input material and settings Includes: - Emulsion tray - Emulsion pump - Oil cooler

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Ffjdpfjxxz E Njx Aa Eew Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Number of cylinders 6 St. Fsdpeyrt Abefx Aa Ejfw down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.