Used Emco Fb 5 for sale (138)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Max. turning diameter: 185 mm Max. turning length: 186 mm Spindle bore: 73 mm Max. workpiece weight: 30 kg Control: SIEMENS SINUMERIK 840 C Including documentation Including chip conveyor Bedoxl Amnepfx Aacjww Including LNS Quick Load bar feeder

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram Bsdpfx Asu N Dpmoacjww - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Infinitely variable speed adjustment between gear ranges. Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post. Bodpfexc H Dfjx Aacoww

Condition: good (used), Year of construction: 2009, Machine used only for plastic. thry spindle 95.mm Technical data shown on picture. 27.03.2025. With machine will come another spannpfutter with possibility 80 mm. Parts shown by hand not come. Bwodpfou Ibnqex Aacow

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Brand FANUC Model 31t- Model B Bwsdpjxbul Uofx Aacow Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Remnant extraction system Guide channel made of polyurethane plastic Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Bedpfx Aajwcdyteceww Parts feeding via shuttle (included) Two machines are available

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery Bodpfxjxiy Uks Aaceww The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: Bjdpfx Ajxp Iyhsacoww (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm Bwsdow Rrvwjpfx Aacew

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, Bjdpou Rd S Rofx Aacoww spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: M-075.068.10, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 640 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 50 rpm, table width: 520 mm, table length: 900 mm, CNC milling machine Emco MC 75/50 Machine no.: M-075.068.10 Year of manufacture: 2010 includes 30 SK40 tool holders with pull studs includes 4th rotary axis includes various tools and holders includes coolant concentrate ATTENTION: Machine is being sold as needing repair. The machine control is defective: Heidenhain MC420 Bwedpfx Asxn Hy Roacew includes documentation and operating manual sold without guarantee or warranty

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Bodpfov S Ekyox Aacjww Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Additional Equipment Number of tool holders: 12 Tool holders according to DIN69880 VDI 40 Number of driven stations: 12 This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Bwsdpfxsw Tfiis Aacsw Application Types Turning

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Bedpfx Aasdctnbscjww Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: like new (used), Year of construction: 2018, Technical Data: • Swing diameter over cross slide: 430 mm (max. turning diameter 220 mm) • Turning length: max. 670 mm • Spindle bore (clearance diameter): 45 mm • HS spindle interface DIN 55026 A2-5 • Main drive power: 13 kW • Max. torque: 78 (100) Nm • Speed range: 0–6300 rpm • Counter spindle interface: DIN 55026 A2-4 • Number of tools: 12 driven tools, max. speed: 0–6000 rpm • Tool holder: VDI 25 • Pressure boost station E45 for central coolant system; centrifugal pump 14 bar; lifting pump min. 1.5 bar Bwsdpfx Aaowl Uu Hecsw • Chip conveyor: hinge belt conveyor, discharge height 1200 mm • Swing loader Emcoturn E45 with loading and unloading system; 2-finger parallel gripper / 90° rotating module • Belt conveyor for RT parts feeding: length 1300 mm / width 567 mm; chain pitch 27.1 mm (1800L) • Control: Siemens 828 D ⸻ • Connected load: approx. 46 kVA • Voltage: 400 V / 50 Hz • Weight: approx. 4,300 kg • Space requirement: approx. 15 m²

Condition: not inspected (used), Leadscrew and feed rod lathe, Manufacturer: Emco, Model: Maximat Mentor 10 Bsdpjw U Rdhsfx Aaceww

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h Bwedpsxa Araefx Aacow EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: S6AW11S1, turning diameter over cross slide: 540 mm, turning length: 550 mm, turning diameter: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all positions TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance from spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Bwjdpfew T Sq Tjx Aacew Total power requirement: 40 kVA Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Transport dimensions of machine: approx. 3.3 x 1.9 x 2.2 m Electric configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet equipped with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Bedexcqmqjpfx Aacjww Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), EMCO TURN 332MC. Year of manufacture: 2005. Includes - LM 1200. Accessories included. Bodexgumispfx Aacjww

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Bedpfsw Tg Adex Aacsww Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), Year of construction: 2019, HYPERTURN 65-1300 (SM2Y2) DUOTURN with 2 turrets incl. milling drive and 2 Y-axes High-performance CNC turning/milling center for complete machining of turned and milled parts, with 1300 mm spindle distance; Integrated spindle motors (ISM) on main and sub spindle (liquid-cooled), preloaded roller guides. Drive power: Main spindle - 29 kW Sub spindle - 29 kW Speed range: Main spindle 0 – 5000 rpm Sub spindle 0 – 5000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar capacity ø 65mm) Sub spindle: KK6 Y-axis in both turret slides: • Travel range: +/- 50 mm Includes: • Hollow clamping cylinder including draw tube • Parts ejector and coolant flush through the sub spindle • Sinumerik 840D-sl/OPERATE control o emcoNNECT/APP-based operating interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 3D simulation o and much more. • 2x 12-station tool turrets VDI 30, radial with directional logic for up to 2x 12 live tool stations! Swivel speed adjustable with the feed switch. o Performance data: o Max. 6.7kW at 2650 rpm o Constant torque 25 Nm o Speed range 0–5000 rpm o C-axis for main and sub spindle Bwsdpfxjw T Apgj Aacow o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1200mm (hinged belt type) • Coolant system integrated in the chip conveyor 2x process pumps 14 bar (turrets) 1x rinse pump 4.8 bar (main spindle / working area) 1x rinse pump 3.7 bar (sub spindle) • Control cabinet air-conditioning unit • Hydraulic unit • Machine lamp • 230 V power socket at control panel • 5 leveling elements • Documentation Including: Bürener Maschinenfabrik: chip conveyor Various accessories Year of manufacture: 2019

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws Bjdpfjwy Hvxsx Aaceww - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Year of construction: 1985, condition: ready for operation (used), General Data Measurements height 1780 mm Machine weight 2200 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle motor power 1/15 kW Spindle bore 53 mm Number of axis 2 Movement X-Axis Movement 300 mm X-Axis Feed Force 6 m/min Z-Axis Movement 300 mm Workpiece Workpiece drm over bed 340 mm Workpiece drm over support 158 mm Turret Number of turrets 1 Tool taper VDI 3425 Tail Stock Pinol diameter 60 mm Pinol tool taper MT4 Bwjdpfx Aasw Epzhjcow Tools Number of station 8 This EMCO EMCOturn 340 was manufactured in 1985. A robust horizontal turning machine featuring a swing over bed of 340 mm and a swing over cross slide of 158 mm. It includes an automatic 8-station disc turret and a spindle speed range up to 6000 rpm. Ideal for precision turning with a spindle bore of 53 mm and a rapid traverse speed. Consider the opportunity to buy this EMCO EMCOturn 340 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 400 mm Bwjdpowwm Rdefx Aacjw This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning