Used Emco 7 for sale (159)

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle bore: 50 mm Fjlhccqox Apd Uonepi spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Fpjlhccqjdctnbensi Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Fjlhccexp Hudeqnopi

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm Fjlju Ixw Ashccqnspi centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: excellent (used), Year of construction: 2021, EMCOMAT 14 D Metric center lathe, including: Digital display and constant cutting speed, center distance 650 mm, center height 140 mm, spindle bore DIN 55029 - Size 4, spindle bore Dm. 40 mm, electrical equipment 400V/50Hz/~3/PE, drive power 5.4 kW, Continuously variable spindle speeds 60-4000 rpm, including chuck guard and spindle cover, machine stand, splash guard, standard accessories, operating manual and spare parts list, Electrical documentation. Digital display EMCO ACC. Machine complies with European Fpjlhjy Ticheccqnoi safety standards (CE) Year of manufacture: 2021 C7D215001 includes: Röhm 3-jaw chuck ZS dmr. 140 mm Set of 3 toothed soft jaws External jaws, hardened, for Röhm chuck Dm. 140 Internal jaws, hardened, for Röhm chuck Dm. 140 FOLLOWING CENTER MK2 Quick-change drill chuck type 136 S, 1-13 Arbor MK2 / B12 MACHINE LIGHT LOADING DEVICE LONGITUDINAL TURNING STOP Leveling element Quick-change tool holder set A Operating manual EM14

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Fslhey Svz Ioccqnepi Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N Felhou N Avxeccqnjpi checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center Folhcceu N Dpmjqnepi - bedstop - machine feet

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment Fpjljywyq Dehccqnsi • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Fslhcjywfrtjcqnjpi

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram Felhccqewy Hvxenopi - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Fjlhccqsxz Ab Rjnspi Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Felhoxpvwzjccqnopi Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Coolant tank: 30 l Delivery rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Felhozhm Afsccqnjpi Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking

Condition: good (used), Year of construction: 2000, Used CNC lathe by Emco Padovani Type Emcomat E 300 x 3000 Fagor CNC control system Turning diameter over the bed: Ø 550 mm Turning diameter over the cross slide: Ø 340 mm Distance between centers: 3000 mm Double chuck, front: Rota with quick-change jaws Spindle nose: Camlock 8 Maximum spindle speed: 2500 RPM Tool holder: 4-way Parat Gr. 3 Fpolhccqszhaixenoi Includes 2 steady rests, various tool holders, and chuck jaws.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm Fslhccjzk Ep Noqnopi • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping Fpslhccqsxvraxenoi -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: good (used), Year of construction: 2023, operating hours: 1,382 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, CNC Milling Machine Manufacturer: EMCO, Type: Emcomill E 350 Fjlhcjzil Rkocqnopi Year of manufacture: 2023 Operating hours: only 1,382 hours Technical data Manufacturer: EMCO Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: 1,382 h X-axis: 350 mm Y-axis: 250 mm Z-axis: 300 mm Tool holder: SK 30 Tool magazine: 20 pcs Operating voltage: 400 V / 50 Hz Power consumption: 7 kW Spindle speed: 10,000 rpm Workpiece weight: max. 100 kg Slotted table dimensions: L 520 x W 300 mm Dimensions: L 2.50 x W 2.20 x H 2.50 m Weight: approx. 2 t Equipment • Siemens 828 D control system • Enclosed cabin • 3-axis CNC milling machine • Chip conveyor • Tool package with various tool holders • 20-position tool magazine • High-pressure coolant system (8 bar) • Tailstock • Machine documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2008, operating hours: 27,800 h, functionality: unexamined, machine/vehicle number: R2EW2202, turning length: 310 mm, turning diameter: 220 mm, CNC lathe EMCO E45 incl. bar feeder - from a social institution - driven tools - in good condition ● Availability: Immediate - by arrangement ● Collection date: The machine must be collected by the customer on Thursday, July 30, 2026, at 1:00 PM. Collection on a different date is not possible. ● Payment terms: Prepayment - by bank transfer ● Internal No.: 173-1 ● Can be inspected while powered on: YES Technical data: ● Control: Siemens 810 DC powerline ● Operating hours approx.: 27,800 ● Spindle hours approx.: 10,150 ● C-AXIS & DRIVEN TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are driven) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. speed approx.: 6300 RPM ● Internal coolant line through the turret ● Bar feeder Emco Compact Load (Bar length up to 800 mm, bar diameter up to 45 mm) ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see pictures Scope of delivery: ● Bar feeder Emco Compact Load, existing manuals, chip conveyor, chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: Fpjlhccezhv Rxjqnei ● Installation dimensions L x W x H approx.: 5500 x 2000 x 2200 mm ● Weight approx.: 4000 kg Additional notes: ► Upon request, we can offer transport to the destination. ► The quoted price is net plus VAT. ► The goods are sold excluding any warranty. ► Technical data without guarantee. ► Subject to prior sale. The sale of the goods is exclusively to businesses❗

Condition: good (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, Equipment: documentation/manual, CNC lathe EMCO E45 – from a social institution – with driven tools – in good condition ● Collection date: The machine must be collected by the customer on Thursday, July 30, 2026, at 1:00 PM. Collection on a different date is not possible. ● Payment terms: Payment in advance – by bank transfer Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & DRIVEN TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are driven) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data – see images Scope of delivery: Fpolhszhv Hajccqnsi ● Available manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold excluding any warranty. ►Technical data without guarantee. ►Subject to prior sale. The sale of the goods is exclusively to business customers!

Condition: excellent (used), Year of construction: 2018, Rod diameter: 10 – 65 mm Fpelhcjzkwcnjcqnei Maximum rod length: 3,000 mm Multi-track material support

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, 12-station turret (VDI16), collet chuck, Felhozkk Hysccqnepi jaw chuck, steady rest, driven tools, accessories

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Capacity 2000 x 570 mm Fjlhccqex E Au Ionopi Steady rest

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: Fpslhcsx D E Hbecqnoi • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Folhccqezcplyonopi Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).