Used Emco E 25 for sale (137)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Njdpfx Aey A Hw Ujhzolb Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,741 h, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° Nodpfx Aheympxnozjlb • Tooling system: • Turret: VDI 16 disk turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor (referenced in the stated machine weight)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,971 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 5,500 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, number of axes: 2, Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret type: VDI 16 disk turret with directional logic • Number of tool stations: 12 • Tool shank cross-section: 12 x 12 mm Njdsymqmmjpfx Ahzjlb • Feeds & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Physical dimensions Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor Dimensions Machine Depth 1270 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 85 mm, turning length: 300 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 CNC Lathe with Siemens Control Condition: Very well-maintained, fully operational Nledpeyxvwiefx Ahzsb Location: Graz Manufacturer/Model: EMCO EMCOTURN E25 Control: Siemens Year of manufacture: 2008 IMAGES/VIDEOS: For additional images and videos of the running machine, please send us your request. Technical Specifications: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm Tool turret: 12 stations Turning diameter: Ø 85 mm Swing diameter: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 rpm Maximum: 6300 rpm Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Height: 1900 mm Contact: Please feel free to contact us to arrange a viewing appointment or to receive an offer!

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. Nlodpjyybt Ejfx Ahzob We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Nlsdpfew Dfhujx Ahzsb

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Nedpfx Ahsy Nz Diozolb Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders Nlsdsvwgpbopfx Ahzeb

Condition: ready for operation (used), Year of construction: 2010, operating hours: 64,297 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item punctually, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max): 8,000 rpm Bar capacity: 25.4 mm Centre distance: 445 mm Nlsdpfxsyn Nuxj Ahzsb Spindle distance: 485 mm Travel X-axis: 100 mm Travel Z-axis: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm MACHINE DETAILS Control: FANUC SERIES 18i-TB Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A Operating hours (according to display): 64,297 h EQUIPMENT Tailstock Main spindle Tool turret (12 positions) Driven tools (6 pieces) Y-axis

Condition: excellent (used), EMCO Model E 900 Nledpfx Aspgng Hohzsb Control type SIEMENS SINUMERIK 810 D Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Spindle motor power 13 kw Year 2017 CE machine ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: like new (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, machine/vehicle number: S6E222101, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 500 mm, The machine is in like-new condition with only 650 operating hours. It is in excellent optical and technical condition. Nlodpeyn Aahefx Ahzeb

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Nlodoxp Hudopfx Ahzjb

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Nljdpfoyucc Nsx Ahzjb Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min Nlodpfeu Ixw Aex Ahzjb spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: Fanuc 21T revolution per minute: 50 - 3000 U/min range of revolution per miute: 0 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine xH: 2,2 x 1,0 x 1,62 m Machine built in 1999, first commissioned in 2000 The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria) range. It is in the medium power and size range and is often used in training, workshops, and production. It is specially designed for the precision machining of small parts, shafts, and chuck parts. Nedpfx Aoy Emfwohzslb *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: FANUC 21T revolution per minute: 50 - 3000 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 KW kW electrics - voltage/frequency: 400 / 50 -60 V/Hz Weight approx.: 1,0 t Nlsdpfx Ahsy Emfqezsb dimension machine xH: 2,2 x 1,0 x1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria) range. It is in the medium power and size range and is often used in training, workshops, and production. It is specially designed for the precision machining of small parts, shafts, and chuck parts *

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 Nsdpfxsqn A Rrj Ahzslb 3 coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Nodpfey Ulnisx Ahzslb

Condition: used, Year of construction: 2012, turning diameter 550 mm turning length 1500 mm control Fagor 8055 x-axis 108 mm z-axis 3000 mm Nlsdpfx Aey N D Siohzsb

Condition: used, Year of construction: 2001, Technical details: Nodpfx Aox Aq Hkohzolb turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: good (used), Year of construction: 2005, EMCOMILL FB 6 (with digital scales X, Y, Z) Tool milling machine with 18 spindle speeds from 63-3150 rpm, 18 feeds in the X, Y, Z axes, toolmaker accuracy according to DIN 8615, slide travels X/Y/Z 700/500/500 mm, power 5.5 kW (100% duty cycle), hydraulic tool clamping, tool holder DIN 69871 SK 40, electrical connection 400/50/3, incl. Heidenhain scales in X/Y/Z, machine complies with Nlodsy Tkghepfx Ahzjb CE, without counter support, with work area protection Manufactured according to ISO 9001: 1994 Year of manufacture 2005 F4UT3901

Condition: excellent (used), Year of construction: 2021, EMCOMAT 14 D Metric center lathe, including: Digital display and constant cutting speed, center distance 650 mm, center height 140 mm, spindle bore DIN 55029 - Size 4, spindle bore Dm. 40 mm, electrical equipment 400V/50Hz/~3/PE, drive power 5.4 kW, Continuously variable spindle speeds 60-4000 rpm, including chuck guard and Nedsy Tichopfx Ahzslb spindle cover, machine stand, splash guard, standard accessories, operating manual and spare parts list, Electrical documentation. Digital display EMCO ACC. Machine complies with European safety standards (CE) Year of manufacture: 2021 C7D215001 includes: Röhm 3-jaw chuck ZS dmr. 140 mm Set of 3 toothed soft jaws External jaws, hardened, for Röhm chuck Dm. 140 Internal jaws, hardened, for Röhm chuck Dm. 140 FOLLOWING CENTER MK2 Quick-change drill chuck type 136 S, 1-13 Arbor MK2 / B12 MACHINE LIGHT LOADING DEVICE LONGITUDINAL TURNING STOP Leveling element Quick-change tool holder set A Operating manual EM14

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 810/840D Turn/Mill control, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil Nledpfoy H Etcox Ahzob • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) • Slight corrosion on machine components (common for comparable machines) • 4+4 station tool turret • Tailstock MK1 including quill and center point • 3-jaw chuck installed, no additional jaw sets included • Collets available, but no collet chuck • No drill chuck (MK1) and no drill bits included • Tools available as shown in images • 5.5 mm Allen key included • Siemens Sinumerik 810/840D Turn/Mill control (PC & CD) • License key included, likely transferable • Operating manual and machine documentation included • Data carriers included Technical Specification Driven Tools No Counter Spindle No

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm Nlodpfsx Apd Usx Ahzob spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m

Condition: excellent (used), Year of construction: 2018, operating hours: 10,035 h, functionality: fully functional, Emco Hyperturn 45 Machine with few operating hours and in very good condition! Only small parts were produced; it was never used for heavy-duty work. The machine has a very extensive range of features: - Spindle bore 46 mm - Y-axis in the upper turret - Turret VDI 25 with powered tool stations - Part ejector and part collection tray - Part conveyor belt - Higher coolant pressure (14 bar) - 2x Hainbuch collet chuck Mini SK 52 - Tool measurement - Emco bar loader - Chip conveyor - LED status light Software: Siemens 840D-sl with Shopturn + Tool breakage and wear monitoring + 4-axis turning/balance cutting + Shopturn expansion package (remaining material detection) + Energy management / automatic shutdown The machine is fully functional and is still in production; inspections are possible at any time. The machine is available immediately. All wipers and wiper plates are in very good condition! The control cabinet is very clean, with no oil mist deposits. Nlsdpfx Aey Udv Sohzsb