Used Emco Fb5 for sale (142)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Rsdpexqf Ewjfx Ab Roch

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min Rjdpfsvbhcdox Ab Rjch feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg) Rcjdpfx Absxpvwzs Reh

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Rcedpfx Aboxp Hudj Rsh

Condition: used, turning diameter . mm turning length . mm swing diameter over bed slide . mm Rcedpfeqn A Rrsx Ab Rsh

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Redpfxjxrg Dwo Ab Rjch Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Year of construction: 2003, operating hours: 4,894 h, condition: ready for operation (used), General Data Measurements width 2500 mm Measurements depth 4000 mm Measurements height 2500 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sumerik 810 D Main Drive Spindle bore 65 mm Number of axis 3 Movement X-Axis Movement 210 mm X-Axis Feed Force 5000–7000 Nm X-Axis Rapid Traverse 24 m/min Y-Axis Movement ± 40 mm Z-Axis Movement 610 mm Redpfx Aexr Rw Ijb Rsch Z-Axis Feed Force 5000–7000 Nm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 1 Rotating tools Yes Tool taper VDI 30 Tools Number of station 12 Additional Equipment Oil cooler Parts catcher This 3-axis EMCO turn 365 tcmy was manufactured in 2003, featuring a 12-station tool turret, VDI 30 tool holder, and driven tools with a speed range up to 4,000 rpm. It includes a power chuck, live centre, collet chuck device, and additional tool holders. Ideal for precision turning, this machine offers robust capabilities with a spindle size of 65 mm and a travel distance on the Z-axis of 610 mm. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, Offered here is a machining center from the manufacturer Emco Famup equipped with a 4th axis and tailstock. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2008 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel paths X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 360*0.001° Clamping surface of table: 1000x520 mm Max. workpiece weight: 800 kg Rcedpfxoxrvrde Ab Reh Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 t Dimensions: approx. 4000x2400x2900 mm

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: R2D N2802, turning diameter: 32 mm, The machine is still powered but not operational. The turret sub-spindle is defective. Rcedoxrdq Uepfx Ab Rsh

Condition: good (used), Year of construction: 2005, Control: FANUC Series Oi-TC Max. turning diameter: 310 mm Max. part length: 520 mm Max. bar diameter: 65 mm Travel: X = 210, Y = 610 mm Turret with 12 stations Rjdpfsww H T Esx Ab Rech All driven tools Spindle speed range: 60–4,200 rpm Without tailstock Chip conveyor EMCO bar feeder

Condition: used, Year of construction: 2000, turning diameter over bed 340 mm turning length 190 mm circulation diameter max. 158 mm x-axis 300 mm y-axis 300 mm spindle bore 42 mm 2 weight of the machine ca. 2,6 t Rjdow Sybkjpfx Ab Rjch dimensions of the machine ca. 2200,0 × 1400,0 × 1800,0 m

Condition: used, control SIEMENS SINUMERIC 840C x-axis 235 mm z-axis 270 mm x2-axis 235 mm z2-axis 680 mm hollow 65 mm max. turning speeds 4.000 min/-1 number of tool places 2 x 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - IEMCA TAL 65 AUTO bar loader - Various fixed and driven tool holders Rcodjxqhqispfx Ab Rjh - C-axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Hardness tester functional Rjdpexr Atbsfx Ab Rsch

Condition: good (used), Offered here is a machining center from the manufacturer Emco Famup. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Famup Model: EmcoMill E900 Year of manufacture: 2010 Control: Siemens Sinumerik 810D - ShopMill Technical data: Travel X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12,000 rpm Spindle power: 13 kW Coolant supply through spindle: 15 bar (IKZ - CTS) Rcodpoxrvg Uefx Ab Rjh Total weight: approx. 5 t Dimensions: approx. 4000x2400x2900 mm

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Media Chip conveyor Yes Additional Equipment Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated turret has 12 positions (all are driven) Rcodpfsxpyvzjx Ab Rjh maximum bar diameters that can be processed are Ø65mm due to the drawtube VDI 30 This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpm Movement X/Y/Z : 350/250/300 mm Spindle: Technology:Directdrive Speed:10.000 rpm Rjdjxthpwjpfx Ab Rsch Power (max.):7 kW Torque (max.):41 Nm Taper:SK30 Workingtable: Clampingsurface:520 x 300 mm Tabeloading (max.):100 kg In general: Toolmagazine:20 Stations Rapid travers in X/Y/Z:24 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with 8 bar Workpiecemeasurement:Touch probe, Marposs WRP 45 Toolmeasurement:Probe, Marposs TS30 4.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and Tailstock Oilmistseparation:Mechanical extraction, Reven Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholders

Condition: excellent (used), EMCO Model E 900 Rodpepgng Hsfx Ab Rsch Control type SIEMENS SINUMERIK 810 D Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Spindle motor power 13 kw Year 2017 CE machine ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: used, Year of construction: 2010, turning diameter 220 mm turning length 310 mm control Siemens 810 D powerline turning diameter over bed 430 mm Rsdpexp R Eaefx Ab Roch hollow 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Pos. total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - C-axis - Documentation - Backup - EMCO LM 800 bar loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Rsdpfx Aow N Nvleb Rech Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Condition: good (used), Offered here is a lathe manufactured by Emco. The machine is in good condition and can be inspected under power in our warehouse. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Model: Maxxturn 45 Control: Siemens Sinumerik 840D Year of manufacture: 2008 Technical Data: Swing over bed: 430 mm Swing over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar capacity: 45 mm Centre distance: 670 mm Distance main spindle - sub spindle: 720 mm Travel X-axis: 160 mm Rapid traverse: 24 m/min Travel Z-axis: 510 mm Rapid traverse: 30 m/min Travel Y-axis: +40/-30 mm Rapid traverse: 10 m/min Travel Z2 (sub spindle): 510 mm Traverse speed: 30 m/min C-axis resolution: 0.001° Rapid traverse: 1000 rpm Redpfexq D Uqjx Ab Rsch Main spindle speed range: 0-6300 rpm Power: 8/13 kW Sub spindle speed range: 0-6300 rpm Power: 7/10 kW Disc turret VDI 25 Number of tool stations: 12 (all driven) Driven tool stations: 12 Speed range: 0-6000 rpm Drive power: 4 kW Machine dimensions (LxWxH): 2575 x 1790 x 1958 mm Machine weight: 4000 kg Scope of delivery includes: Various collets Various static tool holders 8x driven tool holders 1x power chuck and 1x additional collet chuck Chip conveyor Short bar loader Emco LM 800 Various additional spare parts on Euro pallet

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, travel X/Z 210/610 mm, maximum bar capacity Ø 65 mm, driven tools, C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction, Rsdpewv N Suofx Ab Rsch

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, spindle bore: 35 mm, turning diameter over bed slide: 280 mm, center height: 140 mm, turning length: 650 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 55 rpm, swing diameter over cross slide: 170 mm, three-jaw chuck diameter: 140 mm, spindle mount: MK 3, An Emco lathe in very good condition is for sale, as can be seen in the pictures. Technical data: • Manufacturer: Emco • Type: Lead and feed screw lathe • Model: Super 11-CD Rcedpfoxn A Dxsx Ab Rsh • Swing diameter over bed approx. 280 mm • Over face slide: approx. 170 mm • Travel of longitudinal slide: approx. 590 mm • Travel of face slide: approx. 135 mm • Spindle bore: approx. Ø 35 mm • Speed range: approx. 55 - 2,200 rpm • Centre distance: approx. 650 mm • Centre height: approx. 140 mm • Four-jaw chuck: Röhm 140 mm • Multifix size A • Year of manufacture: 1998 • Condition: Very good, functional The machine is considered one of the most precise and high-quality compact lathes ever built for teaching and hobby use. Shipping costs by freight forwarder: approx. £150 (within the UK) You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Rcodsxmbypopfx Ab Roh Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Media Chip conveyor Yes Additional Equipment Emco standard bar feeder interface Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Short bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2006. It features a CNC lathe with a drive power of 10 KW, main spindle speeds up to 6300 rpm, and counter spindle speeds up to 7000 rpm. Equipped with two 12-slot tool turrets VDI 25, it supports up to 24 driven tools. The machine includes a Sinumerik 840D control, chip conveyor, and a bar feeder for bars ranging from 6-45 mm in diameter. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, Rsdewd E N Sepfx Ab Rjch 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Table Number of tslots 12 Turret Number of turrets 2 Tool taper VDI 25 Media Chip conveyor Yes Rjdpfxsxmby Ao Ab Roch Additional Equipment Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2004. It features a CNC lathe with dual spindles capable of speeds up to 6300 and 7000 rpm respectively, and two 12-slot tool turrets. Includes high-pressure coolant systems, a chip conveyor, and a bar feeder for efficient operation. Ideal for precision turning tasks. Contact us for more information about this machine. Application Types Turning