Used Emcoturn 140 for sale (8,885)

Condition: ready for operation (used), Groen 40 gallon natural gas fired self contained kettle,model DH/1-40 50 psi mfg 2000, s/n 74786, in good condition pulled running from a soup kitchen, Temperature can be set from 65 to 145 degrees Celcius Tilting Kettle,crank tilt, 2/3 jacket, IPX6 water rated electronic Advanced controls with digital display, 1 minute to 10 hour timer, low (2) and high (7) preset intensities with manual capability, 316 stainless steel liner, floor mounted control console supports, stainless steel construction, bullet feet, electronic ignition, 50 PSI, 0 - 2000' elevation, 100,000 BTU, cCSAus, NSF, Made in USA Iodpfx Aoq Avdvsg Nobc

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Ibsdpfx Agsqy E Evo Njc Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C Iedpfx Agovx S Hhj Nebc without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: used, TECHNICAL DETAILS Isdjug U Tnspfx Ag Nebc - Temperatures : -40 / +180 [°] - Power : 12 [kW] - Inside dimensions : 500 x 500 x 500 [mm]

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW Ibodpfow Tiyxex Ag Nec

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm Ijdpeu T Tp Usfx Ag Nsbc -Total weight: 75.1 kg

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Iodpfou Ibihjx Ag Nsbc

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Machine type: NE Separator Andrin SMAR 140 Isdpfswx H Hhex Ag Nsbc Chassis: Mobile special structure on Extec 6000 Working platform: Mountable working platform with safety railing Accessories: Stairs, NE side discharge conveyor with electric motor, new magnetic conveyor/feeder belt to polar wheel - The plant was completely overhauled and serviced in winter 2021/22. Has not been in operation since then.

Condition: used, Year of construction: 1990, Progressive Header SACMA SP.140 Fully operational Available for any test Ijdpfow Eluwjx Ag Nsbc PROGRESSIVE HEADER SACMA SP.140 Technical information: Number of dies: 3 Heading tonnage: 420 kN Maximum cutoff diameter at 500N/mm²: 8 mm Maximum cutoff length: 65 mm Max. kickout stroke die: 45 mm Max. kickout stroke punch: 14 mm Production speed (pieces per minute): 350 Main motor power: 19 kW Die diameter: 45 mm Die length: 75 mm Punch diameter: 38 mm Net weight: 8,500 kg Gross weight: 10,000 kg Condition: Very good, fully operational Year: 1990 Ready for immediate delivery Machine runs without any issues. Available at HBR srl – Calolziocorte (LC) Italy

Year of construction: 1965, condition: excellent (used), Planing width 140 mm Planing height 120 mm Number of spindles 6 feed on the inverter rolls in the table order of spindles: Iedpfxjhxxnge Ag Nebc 1) horizontal lower 3 kW 2) vertical right 2.2 kW 3) horizontal upper 4 kW 4) horizontal lower 4 kW 5) vertical right 4 kW 6) vertical left 4 kW

Year of construction: 2004, condition: as good as new (ex-display), Submersive pump Vogel Spandau Pumpen model 3Mot.DB63.2370+140 Isdpfxekvnqqj Ag Nsbc 230/400V 0,37 kW

Condition: used, Gears, spur gears, bevel gears, worm gears Ijdpfx Asit Rmieg Nsbc -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg

Condition: new, Year of construction: 2025, pressing force: 320 t, table width: 1,200 mm, table length: 1,200 mm, retraction force: 140 t, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE DELIVERY FROM STOCK H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 320 TONS CAPACITY (POT) 140 TONS MAIN TABLE SIZE 1200 x 1200 mm MOVING TABLE (RAM) SIZE 1200 x 1200 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. OPENING HEIGHT 300 mm MAX. OPENING HEIGHT 1300 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) PROPORTIONAL SPEED AND PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. At different points of the pressing process, different speed, stop and pressure values are entered and the effect of material and mold deformations on the work is minimized with proportional precision. MAX. PRESSURE 250 Bar – Proportionally adjustable ENGINE POWER 37 KW – IE3 PUMP FLOW RATE 70 cm³ – REXROTH FREE FALLING SPEED 50 ~ 600 mm/sec. – Proportionally adjustable PRESSING SPEED 10 ~ 72 mm/sec. – Proportionally adjustable ASCENDING SPEED 90 ~ 750 mm/sec. – Proportionally adjustable DIE-CUSHION WITH SPEED – UP 50 ~ 190 mm/sec. – Proportionally adjustable MAIN CYLINDER DIAMETER Ø380 mm – Ck45 POT CYLINDER DIAMETER Ø270 mm – Ck45 AUXILIARY CYLINDER NUMBER Ø100/60 mm Ck45 – 2 pc. PRESS HEIGHT 7300 mm PRESS DEPTH 2040 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1630 mm PRESS SIDE WINDOW SIZE 500x1685 mm PRE-FILLING VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER CIESSE OFF-LINE FILTRATION REXROTH CIRCILATION MOTOR PUMP REXROTH – 3 kW ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH – 10 MICRON PRESSURE FILTER REXROTH – 10 MICRON RETURN FILTER REXROTH – 25 MICRON OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK Ibodpfx Asvx T Hpsg Nec TEMPERATURE SENSOR PT100 4.20 mA. PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. APPROXIMATE WEIGHT 27 TONS

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg Ibjdpfx Agjvb Dcms Noc milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at) or * Isdpfel Rmqtox Ag Nebc

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg dimensions L x W x H: 0,5 x 0,2 x 0,6 m Iedpju N E H Hjfx Ag Nobc 4x directional valve 1x pressure relief valve 2x pressure switch 1x pressure gauge 2x bubble accumulator *

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower Ibedpfx Ajcnpxgjg Nsc -Clamping block: for workpiece clamping -Width: 140 mm -Length: 370 mm -Height: 53 mm -Threaded holes: M12 -Number: 4x milling support available -Price: per piece -Weight: 21 kg/piece

Condition: used, Gearbox, spur gear, angle gear, worm gear -Manufacturer:Varvel, worm gear -Translation: i= 28 Iodpfx Ast Rbixog Nsbc -Hollow shafts: Ø 24 x 100 mm / Ø 34 x 100 mm -Dimensions: 150/140/H170mm -Weight: 4 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete Iedju Uwv Iopfx Ag Nsbc -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm Ibjdpfx Agev N Ubcs Nsc -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg Ijdpfxof Sa N Uj Ag Nsbc

Condition: used, fuel type: diesel, Tires, solid rubber tires, tractor tires, forklift tires -Gumasol: Softy super elastic tires 2 pieces Iedoficzcepfx Ag Nobc -Tire size: 140/55-6 -Rim: 4.5-6 -Price: complete -Dimension: each Ø 310/133 mm -Weight: 8 kg/piece

Condition: used, Clamping angle, clamping aid Ibedpfx Aegpmbbjg Noc -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Bores: Ø 18/20 mm, see photos -Number: 2x angles available -Price: per piece -Dimensions: 165/140/H245 mm -Weight: 13.1 kg

Condition: ready for operation (used), total height: 2,950 mm, total width: 3,350 mm, total length: 11,400 mm, empty load weight: 4,900 kg, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer Implementatie Software nieuwe controle 2025 Versie: 9.1.1.10 / 2.31e automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm Ijdpjxpgg Hsfx Ag Njbc

Condition: excellent (used), Year of construction: 2007, ABB IRB 140 M2000+ ABB IRC5 Drive04 DEVELOPMENT OF GSG ROBOTICS Iodow R Ncnjpfx Ag Nobc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.