Used Erode for sale (98)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Auction
Auction ended
Oberösterreich
1,400 km
Wire eroding machine
GF Machining Solutions (Agie Charmilles)CUT E 600
Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours!
TECHNICAL DETAILS
Travel Distances
X-axis travel: 600 mm
Y-axis travel: 400 mm
Z-axis travel: 350 mm
Workpiece Data
Workpiece weight: 1,000 kg
Lrsdpfx Aox I Akushzsl
Workpiece height: max. 350 mm
Workpiece width: max. 800 mm
Workpiece length: max. 1,030 mm
Table Data
Table width: 630 mm
Table length: 950 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm
Overall weight: 5,440 kg
EDM hours: 11,537 h
Power-on hours: 29,381 h
Type of mains supply: 3-phase current
EQUIPMENT
Manual central lubrication for CUT E series
Heat exchanger kit
Large wire spool accommodation 25 kg, CUT E series
Wire chopper for CUT E series
Signal lamp
Note: Dismantling and loading can be carried out by the seller at an additional cost.
Listing
Sankt Daniel
1,502 km
Filter for eroding machines
Call
Condition: excellent (used), -----
Ledpfshx Ummex Ahzorl
Listing
Rodoč
2,029 km
Wire eroding machine
CHARMILLESRobofil 690
Call
Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690
- Maximum part dimension 1380 x 1000 x 400
- Travels X,Y,Z 800 x 600 x 600 x 400
- Travels U,V ±30
- Maximum demoulding ±15/110
- Global protection by EC-EMC cabinet
- Fixed work table
- Integrated monobloc flange table
- Guaranteed thermal stability; polymer concrete
- 5 axes controlled by numerical control (XYUVZ)
- Linear glass rulers on all axes
- Axis protection by anti-collision system
- Tilting up to ±30°.
- ThermoCut (automatic threading and rethreading)
- Bonina thread holder 4, 8 and 16Kg
- Filtration system: 2 filters (29m2)
- Water/water heat exchanger
- Automatic regulation of deionization with cylinder
- Numerical control CT Millenium (Fanuc)
- 12" TFT color graphic touch screen
- Hard disk 10GB
- Remote control
- Machining strategy PROFIL-EXPERT
- Integrated CT-EXPERT technology
- Automatic adaption of the PILOT-EXPERT generator
- Digital generator control
- Autorestart
- Self-diagnosis
- Integrated Ethernet card
Lodpfx Ahswz Iuxezerl
Additionals:
Contact electrode
Pinch roller
Chiller
Spare motor for U/V axis
Listing
Δέλτα
2,521 km
Wire eroding machine
AGIE CHARMILLESCUT E 350
Call
Condition: excellent (used), Year of construction: 2018, operating hours: 2,379 h, X,Y,Z Travels 350mmx 250mm x 250mm
U, V Travel ±45
Taper angle/height ±30
Max. Part dimensions 820mm x 680mm x 250mm
Max. Part Weight 400kg
Lodpfx Ahjygc Szszsrl
Speed of axis movement (XYZ) 6mm/min
Anti-collision protection for axes X,Y,Z
Wire Diameter Range 0,1mm-0,3mm
Dimensions of complete equipment 1750mm x 2.470mm x 2.200mm
Total weight of equipment without dielectric 2.500kg
Equipped With:
AC Cut HMI Control W/ 19" Touchscreen Control
IPG-V Generator with HMI2 Control
Auto Wire Threading
Submerged
Glass Scales
Chiller
Transformer
Listing
Singapore
10,962 km
Eroding machine
CHARMILLESFO 550SP
Call
Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, GF Charmilles EDM
FO 550 Sp c/w ATC 16 - 2 units
Year 2010
c/w RTC 16 (Robot Tool Change)
Lredpfox Hp Ukox Ahzel
X-Axis Travel 600mm
Y-Axis Travel 400mm
Z-Axis Travel 450mm
Control
Charmilles Touch
Tool Changer - RTC16
Power Source 64 AMP
C-Axis - Yes
Chuck System 3R
Cheap Sales
Listing
Scheeßel
874 km
Lubrication oil pumps
WOERNER oder BOSCH
Call
Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element
Lredpfxexl Aauj Ahzsl
Listing
Saarbrücken
988 km
Mobile Shop/ Food Truck
OtherFood Container-leer oder mit Ausstattung
Call
Condition: new, Year of construction: 2025, color: grey, Container Description
Our offer includes a complete package of high quality, making it unbeatable. We source the gas appliances exclusively from qualified manufacturers of high standards. The construction and the entire kitchen with all equipment are NEW!
Container Details
Availability: Ready for immediate delivery
Color: Anthracite
Delivery is included in the price, delivery to the curbside.
Structure is made from isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees optimal interior temperature year-round.
Dimensions
Internal length: 5,898 mm
Internal width: 2,352 mm
Internal standing height: 2,385 mm
Two new containers are for sale:
Container 1: Empty – ideal for individual use or custom conversion
The water system opening, circuit breaker box, two serving hatches, and ceiling lighting are already installed (see final images in the gallery).
Price: €25,000 net
Warranty: 1 year warranty on body and electrical system. This price applies to the standard configuration shown. Changes or additions will incur additional costs.
Container 2: Fully equipped with professional foodservice equipment – ready to use, perfect for street food
Price with equipment listed below: €39,500 net.
Gastronomy Equipment; Kitchen made of stainless steel
Gas Appliances:
• Bertos gas cooker with 2 burners, dimensions (W x D x H) 300 x 600 x 290 mm, output: 6.2 kW, made of stainless steel, G6F2B
• Bertos gas grill, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B
• Bertos gas fryer, 2 x 8-litre basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B
Ljdpfx Asy R S Ubjhzerl
Gas cabinet for 3 x 11-litre propane gas cylinders
Refrigeration
• Under counter refrigerator ‘Liebherr’
• Combination refrigerator Liebherr
Water System
• Water system with canisters, 30-litre capacity with fresh and waste water containers
• Two stainless steel sinks with fittings
• Hygiene package with paper towel dispenser and soap dispenser
• 10-litre hot water boiler
• Pump
Lighting
• LED ceiling lighting
• LED lighting with color effects around the serving hatch, remote-controlled
• Emergency light
Additional fittings
• Serving and work surfaces made of brushed stainless steel
• Two serving hatches
• Insulated partition at the cooking area (fire-resistant)
• Extractor hood with labyrinth filters
• Anti-slip flooring for commercial kitchens
• Sneeze guard (optional)
• Side door entry
• Generator cabinet
Warranty: 1-year warranty on body and kitchen
This price applies to the standard configuration shown. Changes or additions will incur additional costs.
We can also build this model to your custom specifications.
Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? Many vehicle details can be customized to your specifications!
Listing
Wekerom
703 km
Entecon conveyor flowveyor cable conveyor, aerodynamic transport.
Entecon
Call
Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport
Tube diameter: 76.1 mm
Completely stainless steel
Total length: 4300 mm
In very good condition
See our other listings
VMA Wekerom
Lrodpfx Ahex Nymcozsl
Listing
Mierlo
742 km
Hole drilling edm machine
Waldmann & WeiglER-5
Call
Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine)
Lrodpfx Asy Su Iyshzel
This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.
Listing
Cloppenburg
800 km
2005 Vollmer QXD 400
VollmerQXD 400
Call
Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production.
Accessories:
Total enclosure
Software path management
Software P- System for peeling cutters,
Software shaft endmills (207/208)
Software discoid tools face (221/222/223/224)
Software profiled workpieces (233/234/239/240)
Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263)
Software discoid tools (264/265)
Software shaft and jointing cutters (267/268/277/278)
Software step tools (271)
Software scoring saws (299)
Software saws flat tooth (301)
Software saws single sided with chamfer (302/303)
Software saws alternate tooth (304)
Software saws triple chip (309)
Software saws flat top tooth (310)
Software saws flat trapezoid tooth (311)
Software saws alternate tooth with chamfer (312)
Software shaft and jointing cutters (7/8)
Software shaft and jointing cutters profiled (33/34)
Software hoggers, profiled hoggers (53/54/55/56/57/58)
Software discoid tools (64/65)
Software shaft and jointing cutters (67/68/77/78)
Software compensation (90)
Software saws flat tooth (101)
Software saws single sided with chamfer (102/103)
Software saws alternate tooth (104)
Software saws triple chip tooth (109)
Software saws flat top tooth (110)
Software saws triple chip tooth (111)
Software saws alternate tooth with chamfer (112)
Software for polishing of profiled hoggers (757/758/760/761)
Filter system with chiller for dielectric fluid
Automatic fire extinguishing system DIN 14497
Standard programs for measuring, eroding etc.
Program for chamfering of workpiece cutting edges,
Automatic Diagnosis program for machine operational status with text output on screen
Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,
6 sided erosion wheel changer,
Workhead SK 50 with adapter to 12 HSK 63 A,
Turntable workpiece magazine for 12 workpieces SK 50,
Turntable workpiece magazine for 4 workpieces SK 50,
6 flush sets
QXD250 CAD/CAM for external PC workstation including ARES drawing program,
Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse,
Ledpfx Ahew S I Dgezjrl
1 HSK63 F adapter for measuring the machine.
X axis travel: 730 mm
B axis travel: +/- 30 °
Y-axis travel: 840 mm
Z axis travel: 500 mm
E-axis: 330°
A-axis: 360°
Workpiece carrier: SK50
workpiece length max.: 400 mm
Workpiece diameter max.: 400 mm
workpiece weight max.: 15 kg
Connected load approx.: 6.7 kW (400 V / 50 Hz
Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm
Weight approx.: 7800 kg
colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1
Listing
Cloppenburg
800 km
2010 Vollmer QXD 200
VollmerQXD 200
Call
Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,
Extraction N183,
Cooling and cleaning device for dielectric,
Automatic fire extinguishing device,
Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading
1 set of gripper fingers for workpiece automation HSK 63/SK40
Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,
1 exchange element with flange,
1 x flushing kit,
Test bar
X axis travel: 440 mm
Lrjdpfx Aeycckcshzsl
B-axis: +/- 15°
Y axis travel: 876 mm
Z-axis travel: 420 mm
E-axis swivel range: 210°
A-axis rotation range: 360°
workpiece carrier base: SK 50
workpiece length max.: 200 mm
Workpiece diameter max.: 250 mm
workpiece weight: 15 kg
Connected load approx.: 6.7 kW 400V/50 Hz
Weight approx: 7000 kg
Dimensions W x D x H =: 1987 x 3141 x 2275 mm
colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1
Listing
Burbach
927 km
EDM machine
OPS IngersollGANTRY EAGLE 500 Generalüberholt
Call
Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition
The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition.
During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system.
The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced.
Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state.
The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation.
Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards.
The machine is immediately available and is ideally suited for reliable production use.
Technical Data:
Manufacturer: Ingersoll (OPS Ingersoll)
Die-Sinking EDM Machine
Model: OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture: 2009
Control system: EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn – quick programming
Powertec Handheld – multifunctional manual control device
Manual eroding via Powertec Handheld
High-Speed Jump: max. 18 m/min
Generator output: 60 Ampere, EAGLE Powertec
Lrodpsyzw I Isfx Ahzsl
Travel paths (X, Y, Z): 525 x 400 x 450 mm
Electrode changer: 20-position pick-up carousel
Work tank (W x D x H): 770 x 670 x 440 mm
Worktable (W x D): 750 x 650 mm
Load capacity: 1,000 kg
Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system
Special features:
Linear measuring system on all axes (Z axis standard in series)
Listing
Burbach
927 km
EDM machine
OPS IngersollGANTRY EAGLE 500 Generalüberholt
Call
Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition
The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition.
During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system.
The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced.
Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state.
Ljdpfx Ahjyrqpfszsrl
The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation.
Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards.
The machine is immediately available and is ideally suited for reliable production use.
Technical Data:
Manufacturer: Ingersoll (OPS Ingersoll)
Die-Sinking EDM Machine
Model: OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture: 2009
Control system: EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn – quick programming
Powertec Handheld – multifunctional manual control device
Manual eroding via Powertec Handheld
High-Speed Jump: max. 18 m/min
Generator output: 60 Ampere, EAGLE Powertec
Travel paths (X, Y, Z): 525 x 400 x 450 mm
Electrode changer: 20-position pick-up carousel
Work tank (W x D x H): 770 x 670 x 440 mm
Worktable (W x D): 750 x 650 mm
Load capacity: 1,000 kg
Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system
Special features:
Linear measuring system on all axes (Z axis standard in series)
Listing
Burbach
927 km
Electrical discharge machine
OPS IngersollGantry EAGLE 800 Generalüberholt -
Call
Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800
Overhauled
Year of construction 2013
EAGLE Powertec PC/NC control 3060
22" screen with touchscreen operation
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld multifunctional manual control unit
Manual eroding with Powertec Handheld
EAGLE Powertec - PT 60 fine finishing generator, 60 amps
High Speed Jump max. 18,000 mm / min.
Travel (X, Y, Z) 550 x 850 x 450 mm
Distance table / electrode chuck min. 135 mm / max. 585 mm
Lodpfjyrqprex Ahzjrl
Electrode changer 20-fold pick-up disk magazine
Work bowl (W x D x H) 800 x 1,100 x 480 mm
Work table (W x D) 760 x 1,000 mm
Load capacity 2,000 kg
Top load 200 kg
Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm
Integrated cartridge filter system
Accessories:
CO2 fire extinguishing system
Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request)
ECOTEC energy-saving function Standby mode for Gantry Eagle
Multiprog Powertec technology programming on CD for external programming station
Listing
Burbach
927 km
Electrical discharge machine
OPS IngersollGantry EAGLE 800 Generalüberholt -
Call
Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800
Overhauled
Year of construction 2013
EAGLE Powertec PC/NC control 3060
22" screen with touchscreen operation
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld multifunctional manual control unit
Manual eroding with Powertec Handheld
EAGLE Powertec - PT 60 fine finishing generator, 60 amps
High Speed Jump max. 18,000 mm / min.
Travel (X, Y, Z) 550 x 850 x 450 mm
Distance table / electrode chuck min. 135 mm / max. 585 mm
Electrode changer 20-fold pick-up disk magazine
Work bowl (W x D x H) 800 x 1,100 x 480 mm
Work table (W x D) 760 x 1,000 mm
Load capacity 2,000 kg
Top load 200 kg
Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm
Integrated cartridge filter system
Accessories:
CO2 fire extinguishing system
Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request)
ECOTEC energy-saving function Standby mode for Gantry Eagle
Multiprog Powertec technology programming on CD for external programming station
Lrodpfxsyi Uais Ahzjl
Listing
Wien
1,576 km
Die-sinking edm
ChmerCM323Z + 75 EZ
Call
Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,600 mm, total length: 1,500 mm, table width: 500 mm, type of input current: three-phase, distance table to quill: 550 mm, workpiece length (max.): 800 mm, workpiece width (max.): 480 mm, workpiece height (max.): 250 mm, control cabinet length: 880 mm, control cabinet width: 700 mm, control cabinet height: 1,860 mm, input voltage: 400 V, overall weight: 1,240 kg, tank capacity: 280 l, Equipment: documentation/manual, Sinker EDM Machine CM323Z
Technical Data
Maximum table travel (X x Y): 300 x 200 mm
Maximum head travel (Z): 300 mm
Orbital movement (deflection) U-V travel: ± 5 mm
Distance head/table: 250 to 550 mm
Table size: 500 x 350 mm
Maximum workpiece weight: 500 kg
Work tank dimensions: 820 x 500 x 300 mm
Dielectric tank volume: 280 l
Maximum electrode weight: 15 kg
Smooth linear guides
Glass scale encoders on all 3 axes
Required space (W x D x H): approx. 1600 x 1500 x 2400 mm
Weight: 1000 kg
Generator / Power Supply Unit 75 EZ
Technical Data
Maximum machining current: 75 A
Power consumption: 5 kVA
Maximum possible feed rate: 550 mm³/min
Achievable surface finish: 0.45 µm/Ra
Electrode wear rate: 0.2 %
Required space (W x D x H): approx. 700 x 880 x 1860 mm
Weight: 240 kg
Additional options included:
Orbital and Z-axis deflection system – CNC controlled.
Programmable Z-axis allows for both roughing and finishing in a single operation; thread eroding is also possible.
Fire extinguisher
Permanent magnetic chuck 150 x 300 mm
Rapid tank filling system
Safety switch for tank door
Manual quick-change chuck
Lredpfx Ahjy A If Tjzol
Included accessories:
Quick-change system with approx. 20 electrode holders
Electrode materials: copper and graphite
Drill chuck, collets
Tool cabinet
Dielectric fluid
Operator training at our facility in 1110 Vienna included
The machine has rarely been used (1,083 operating hours) and is therefore in very good condition, and can be demonstrated under power.
Inspection possible during our business hours or by appointment.
Sale due to upcoming retirement.
Listing
Sonsbeck
773 km
Punching knives from solid steel
Richard Hess MBV GmbHStanzmesser aus vollem Stahl
Call
Year of construction: 2024, condition: new, Punching knives eroded from solid steel
Our punching knives are manufactured from selected steels and are available in a wide range of geometries and standards of all types such as ISO, DIN, JIS, ASTM, IEC.
They are characterized by:
- competent steel selection
- material specific cutting geometry
Lodokkhkujpfx Ahzorl
- optional equipment with various specimen ejectors and clamping spigots
- individual production in different heights possible
- also possible as multicutter
- long tool life
- excellent cutting finish
- optimal cutting results
- suitable for every type of press e.g. manual toggle presses, pneumatic and hydropneumatic presses
Listing
Mönchengladbach
810 km
Coordinate measuring machine
MitutoyoCrysta Apex S7106
Call
Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation).
Software - MCOSMOS 3 CNC V4
Equipment: PH10MQ probe head (incl. FCR25 quick-change rack).
SP25M scanning probe system with 5-piece probe module set.
MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box).
Ledpox H Nn Rsfx Ahzerl
CAT1000PS V4 (CAD comparison and evaluation).
Software upgrade MCOSMOS-1 from V2 to V4.
GEO-EDM add-on module for eroded parts.
Part-program generator and GEO-EDM assistant.
Listing
Luckenwalde
1,151 km
EDM machine
ELECTRO ARC2-DBQT
Call
Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator)
ELECTRO ARC 2-DBQT
FOR SPARK ERODING BROKEN DRILLS AND TAPS
Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact.
- Year of manufacture: 1999
- For taps M1.6 to M38
Ljdpsymw Spjfx Ahzerl
- For drills Ø1 to Ø38
- 1x collet Ø4 mm
- 1x collet Ø4.5 mm
- 1x collet Ø5 mm
- 2x collets Ø6 mm
- 380 V
- 10 kVA
- 15 A
- 50 Hz
- Serial No.: 1270
Free loaded onto truck
Listing
Germany
1,034 km
EDM System
Zimmer & KreimZK Genius 700/Chameleon Quad
Call
Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible.
Lrodpewdwztsfx Ahzsl
Listing
Groß-Bieberau
1,039 km
Die-sinking edm
Zimmer & KreimZK 400 NOVA
Call
Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, warranty duration: 12 months, Precision & stability through robust construction.
The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable precise position detection and minimize measurement errors.
Compact & rigid mechanical concept.
The short C-frame design, combined with generously dimensioned cast components, guarantees mechanical stability and precision throughout the machine’s entire service life. Its high level of robustness absorbs all machining forces, ensuring a consistently accurate spark gap between workpiece and electrode.
Key features at a glance:
- Manual eroding with jog function via hand control and joystick functionality
- High vibration damping due to sturdy cast construction
Ledeyh Nf Uepfx Ahzorl
- Maximum removal rates and accuracy for all material pairings
- Low-wear final dimension tuning
- Fully encapsulated, integrated measuring systems
- Fully integrated work area lighting
- Automatic centralized lubrication
Technical data:
- Height: approx. 2400 mm
- Width: approx. 2410 mm
- Depth: approx. 2270 mm
- Weight without fluids: approx. 2800 kg
- Table (L x W): 700 x 400 mm
- Dielectric above table: 350 mm
- Dielectric filters: 3 cartridge filters
- Max. workpiece weight: 700 kg
- Travel range X-Y: 400 x 300 mm
- Travel range Z: 350 mm
- Resolution X-Y-Z: 0.001 mm
- Max. electrode weight: 50 kg
- Dielectric capacity: 450 l
- Required cooling capacity: 4.5 kW
- Air flow rate: 10 l/min
- Required air pressure: min. 6 bar
- Electrode changer: 4-position
Trust Seal
Dealers certified through Machineseeker

Listing
Fluorn-Winzeln
1,135 km
Bes Maschinenbau S-32-3
S-32-3 Vorführmaschine
Call
Condition: as good as new (ex-display), Year of construction: 2022, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, For sale is a start hole eroding machine
bes S 32-3
Properties
High drilling speed
low electrode wear
Lrodjir Eahopfx Ahzel
table size (width x depth) 450 x 210 mm
travel X/Y/Z 290 x 190 x 350 mm
Motorized coarse adjustment Z 150 mm
Max. Workpiece height 245 mm
Max. Workpiece weight 200 kg
Electrode guide adjustment 150 mm
Electrode diameter 0.3 - 10 mm
External dimensions of the machine 1030 x 800 x 2100 mm
Net weight of the machine 600 kg
Filtration canister 20 l (standard),
Programmable Z-axis standard
Several machines available immediately.
Listing
Doha
5,535 km
Sheet metal processing center
SalvagniniP4x-2516
Call
Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle.
Max. sheet length: 3,048 mm
Max. sheet width: 1,524 mm
Max. bending length: 2,500 mm
Sheet thickness (steel ~410 MPa): 2.5 mm (90°)
Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°)
Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°)
Max. bending angle: +135° / -135°
Max. flange height: 165 mm
Max. diagonal (rotatable sheet): 2,800 mm
Lsdpfx Ajyr Ackshzorl
Min. sheet thickness: 0.5 mm
Max. pack height (incl. pallet): 350 mm
Max. load capacity: 5,000 kg
Vertical stroke (loading table): 550 mm
Rotation capability: 0°, 90°, 180°, 270°
Automatic loading system with scissor lift table ()
Conveyor–destacker (PCD3015) for automatic feeding
Automatic panel bending center P4X-2516
Upper bending blade (LS1)
Lower bending blade (LI)
SiX CNC control system
SOLE.P4 production management software
OFFICE.P4 offline programming software
ABA automatic blankholder (automatic length adjustment)
CLA-A asymmetric auxiliary bending system
UC1000-G13 gooseneck tool set
Eroded clamp (for coated / special materials)
PSE automatic cleaning & lubrication system
SAP panel unloader / accumulator
Spare parts kit (approx. €7,000 value)
We make it easier for you to find: "erode"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Erode (98)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you


















































































































































































































